! Started logfile: /scr/pima/bg219a_uvs/J0740-2444_S_dfm.log on Thu May 19 23:57:36 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0740-2444_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0740-2444_S_uva.fits ! AN table 1: 40 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J0740-2444 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2160 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0740-2444_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.046906Jy sigma=20.229056 ! Fit after self-cal, rms=0.683714Jy sigma=13.130324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=5.888 mas, bpa=-2.811 degrees ! Estimated noise=1.15904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24149 Jy ! Component: 100 - total flux cleaned = 0.327099 Jy ! Total flux subtracted in 100 components = 0.327099 Jy ! Clean residual min=-0.024596 max=0.039451 Jy/beam ! Clean residual mean=-0.000087 rms=0.008357 Jy/beam ! Combined flux in latest and established models = 0.327099 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.327099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108892Jy sigma=2.084078 ! Fit after self-cal, rms=0.108797Jy sigma=2.082183 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=6.729 mas, bpa=-2.392 degrees ! Estimated noise=0.792486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0624766 Jy ! Component: 100 - total flux cleaned = 0.0961505 Jy ! Component: 150 - total flux cleaned = 0.114649 Jy ! Component: 200 - total flux cleaned = 0.124994 Jy ! Total flux subtracted in 200 components = 0.124994 Jy ! Clean residual min=-0.006096 max=0.008173 Jy/beam ! Clean residual mean=-0.000048 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 0.452093 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 53 components and 0.452093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066779Jy sigma=1.194395 ! Fit after self-cal, rms=0.066660Jy sigma=1.192433 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.059 x 6.729 at -2.392 degrees (North through East) ! Clean map min=-0.006007 max=0.32756 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.05 NL 1.00 OV 0.99 ! PT 0.98 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.03 NL 1.01 OV 1.01 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.02 NL 1.00 OV 0.99 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 0.98 NL 0.99 OV 0.96 ! PT 0.99 SC 0.93 ! ! ! Fit before self-cal, rms=0.066660Jy sigma=1.192433 ! Fit after self-cal, rms=0.064068Jy sigma=1.171070 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=6.753 mas, bpa=-2.203 degrees ! Estimated noise=0.784801 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123541 Jy ! Component: 100 - total flux cleaned = 0.00123296 Jy ! Component: 150 - total flux cleaned = 0.00126887 Jy ! Component: 200 - total flux cleaned = 0.00127056 Jy ! Total flux subtracted in 200 components = 0.00127056 Jy ! Clean residual min=-0.004944 max=0.005357 Jy/beam ! Clean residual mean=0.000002 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.453364 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.453364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064006Jy sigma=1.170153 ! Fit after self-cal, rms=0.064009Jy sigma=1.170081 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064009Jy sigma=1.170081 ! Fit after self-cal, rms=0.061898Jy sigma=1.146298 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=6.78 mas, bpa=-2.213 degrees ! Estimated noise=0.785107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308403 Jy ! Component: 100 - total flux cleaned = 0.000384962 Jy ! Component: 150 - total flux cleaned = 0.000482043 Jy ! Component: 200 - total flux cleaned = 0.000538817 Jy ! Total flux subtracted in 200 components = 0.000538817 Jy ! Clean residual min=-0.003736 max=0.004397 Jy/beam ! Clean residual mean=-0.000011 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.453902 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.453902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061863Jy sigma=1.145487 ! Fit after self-cal, rms=0.061859Jy sigma=1.145396 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.5, 55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321475 Jy ! Component: 100 - total flux cleaned = 0.00344834 Jy ! Component: 150 - total flux cleaned = 0.0035571 Jy ! Component: 200 - total flux cleaned = 0.0035123 Jy ! Total flux subtracted in 200 components = 0.0035123 Jy ! Clean residual min=-0.003381 max=0.003729 Jy/beam ! Clean residual mean=0.000003 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.457415 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.457415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061647Jy sigma=1.140679 ! Fit after self-cal, rms=0.061627Jy sigma=1.140339 ! Inverting map ! Added new window around map position (34, 75). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324201 Jy ! Component: 100 - total flux cleaned = 0.00485845 Jy ! Component: 150 - total flux cleaned = 0.00586888 Jy ! Component: 200 - total flux cleaned = 0.0063336 Jy ! Total flux subtracted in 200 components = 0.0063336 Jy ! Clean residual min=-0.003125 max=0.002731 Jy/beam ! Clean residual mean=-0.000005 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.463748 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.463748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061430Jy sigma=1.136872 ! Fit after self-cal, rms=0.061420Jy sigma=1.136724 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061420Jy sigma=1.136724 ! Fit after self-cal, rms=0.061470Jy sigma=1.136191 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.788 mas, bpa=-2.28 degrees ! Estimated noise=0.784871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118941 Jy ! Component: 100 - total flux cleaned = 0.00160007 Jy ! Component: 150 - total flux cleaned = 0.00175063 Jy ! Component: 200 - total flux cleaned = 0.00193551 Jy ! Total flux subtracted in 200 components = 0.00193551 Jy ! Clean residual min=-0.003004 max=0.002544 Jy/beam ! Clean residual mean=0.000004 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.465684 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 117 components and 0.465684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061425Jy sigma=1.135493 ! Fit after self-cal, rms=0.061427Jy sigma=1.135429 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155882 Jy ! Component: 100 - total flux cleaned = 0.00015612 Jy ! Component: 150 - total flux cleaned = 0.000200889 Jy ! Component: 200 - total flux cleaned = 0.000222138 Jy ! Total flux subtracted in 200 components = 0.000222138 Jy ! Clean residual min=-0.002948 max=0.002533 Jy/beam ! Clean residual mean=0.000005 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.465906 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 0.465906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061409Jy sigma=1.135137 ! Fit after self-cal, rms=0.061408Jy sigma=1.135116 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061408Jy sigma=1.135116 ! Fit after self-cal, rms=0.061463Jy sigma=1.135068 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.897 mas, bmaj=17.37 mas, bpa=-3.617 degrees ! Estimated noise=1.07561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023835 Jy ! Component: 100 - total flux cleaned = 0.00042106 Jy ! Component: 150 - total flux cleaned = 0.000618456 Jy ! Component: 200 - total flux cleaned = 0.000747784 Jy ! Total flux subtracted in 200 components = 0.000747784 Jy ! Clean residual min=-0.002199 max=0.002400 Jy/beam ! Clean residual mean=0.000020 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.466654 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 139 components and 0.466654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061459Jy sigma=1.135007 ! Fit after self-cal, rms=0.061461Jy sigma=1.134987 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101008 Jy ! Component: 100 - total flux cleaned = 0.000155721 Jy ! Component: 150 - total flux cleaned = 0.000193717 Jy ! Component: 200 - total flux cleaned = 0.000242707 Jy ! Total flux subtracted in 200 components = 0.000242707 Jy ! Clean residual min=-0.002135 max=0.002303 Jy/beam ! Clean residual mean=0.000021 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.466897 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 145 components and 0.466897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061458Jy sigma=1.134957 ! Fit after self-cal, rms=0.061459Jy sigma=1.134950 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.789 mas, bpa=-2.3 degrees ! Estimated noise=0.785275 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 6.789 at -2.3 degrees (North through East) ! Clean map min=-0.0026425 max=0.32458 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.695 mas, bmaj=5.917 mas, bpa=-2.491 degrees ! Estimated noise=1.14429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2384 Jy ! Component: 100 - total flux cleaned = 0.322973 Jy ! Component: 150 - total flux cleaned = 0.368603 Jy ! Component: 200 - total flux cleaned = 0.397614 Jy ! Total flux subtracted in 200 components = 0.397614 Jy ! Clean residual min=-0.011539 max=0.015405 Jy/beam ! Clean residual mean=-0.000035 rms=0.003641 Jy/beam ! Combined flux in latest and established models = 0.397614 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.397614 Jy ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.789 mas, bpa=-2.3 degrees ! Estimated noise=0.785275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257458 Jy ! Component: 100 - total flux cleaned = 0.0396707 Jy ! Component: 150 - total flux cleaned = 0.0477322 Jy ! Component: 200 - total flux cleaned = 0.0529786 Jy ! Total flux subtracted in 200 components = 0.0529786 Jy ! Clean residual min=-0.004165 max=0.004221 Jy/beam ! Clean residual mean=-0.000016 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.450592 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 63 components and 0.450592 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.897 mas, bmaj=17.37 mas, bpa=-3.617 degrees ! Estimated noise=1.07561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539485 Jy ! Component: 100 - total flux cleaned = 0.00830846 Jy ! Component: 150 - total flux cleaned = 0.0104585 Jy ! Component: 200 - total flux cleaned = 0.0120925 Jy ! Total flux subtracted in 200 components = 0.0120925 Jy ! Clean residual min=-0.003193 max=0.002365 Jy/beam ! Clean residual mean=0.000008 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.462685 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126215 Jy ! Component: 100 - total flux cleaned = 0.00210625 Jy ! Component: 150 - total flux cleaned = 0.00260444 Jy ! Component: 200 - total flux cleaned = 0.0030294 Jy ! Total flux subtracted in 200 components = 0.0030294 Jy ! Clean residual min=-0.002512 max=0.002159 Jy/beam ! Clean residual mean=0.000017 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.465714 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 124 components and 0.465714 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.789 mas, bpa=-2.3 degrees ! Estimated noise=0.785275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704678 Jy ! Component: 100 - total flux cleaned = 0.000765602 Jy ! Component: 150 - total flux cleaned = 0.000769465 Jy ! Component: 200 - total flux cleaned = 0.000815668 Jy ! Total flux subtracted in 200 components = 0.000815668 Jy ! Clean residual min=-0.002893 max=0.002527 Jy/beam ! Clean residual mean=0.000008 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.46653 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 144 components and 0.46653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061500Jy sigma=1.135771 ! Fit after self-cal, rms=0.061490Jy sigma=1.135627 wmodel /J0740-2444_S_map.mod ! wmodel: Unable to open new model file: /J0740-2444_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0740-2444_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 6.789 at -2.3 degrees (North through East) ! Clean map min=-0.0026997 max=0.32438 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0740-2444_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.324383 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000660722 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.611058 0.611058 1.22212 2.44423 4.88846 9.77693 19.5539 39.1077 78.2154 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.324 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 490.951 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0740-2444_S_dfm.log closed on Thu May 19 23:57:38 2016