! Started logfile: /scr/pima/bg219a_uvs/J0739+7527_S_dfm.log on Thu May 19 23:57:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0739+7527_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0739+7527_S_uva.fits
! AN table 1: 30 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.982222 visibilities/baseline/integration-bin.
! Found source: J0739+7527
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1768 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0739+7527_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042614Jy  sigma=21.682547
! Fit after  self-cal, rms=0.820718Jy  sigma=16.739521
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.074 mas, bmaj=11.73 mas, bpa=60.37 degrees
! Estimated noise=1.71547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135991 Jy
! Component: 100  -  total flux cleaned = 0.168911 Jy
! Total flux subtracted in 100 components = 0.168911 Jy
! Clean residual min=-0.013618 max=0.015254 Jy/beam
! Clean residual mean=0.000014 rms=0.004117 Jy/beam
! Combined flux in latest and established models = 0.168911 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.168911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074877Jy  sigma=1.430835
! Fit after  self-cal, rms=0.074857Jy  sigma=1.430273
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.591 mas, bmaj=12.56 mas, bpa=60.57 degrees
! Estimated noise=0.866392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024454 Jy
! Component: 100  -  total flux cleaned = 0.0377039 Jy
! Component: 150  -  total flux cleaned = 0.0456641 Jy
! Component: 200  -  total flux cleaned = 0.0505775 Jy
! Total flux subtracted in 200 components = 0.0505775 Jy
! Clean residual min=-0.005039 max=0.004481 Jy/beam
! Clean residual mean=0.000012 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.219489 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 39 components and 0.219489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067558Jy  sigma=1.222701
! Fit after  self-cal, rms=0.067501Jy  sigma=1.219979
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.591 x 12.56 at 60.57 degrees (North through East)
! Clean map  min=-0.0045847  max=0.18707 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        0.99     OV        1.00     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.99     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        0.99     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.02     NL        0.98     OV        0.97     
!   PT        0.96     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.067501Jy  sigma=1.219979
! Fit after  self-cal, rms=0.068061Jy  sigma=1.212442
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.617 mas, bmaj=12.63 mas, bpa=60.66 degrees
! Estimated noise=0.859114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000373505 Jy
! Component: 100  -  total flux cleaned = 0.000715181 Jy
! Component: 150  -  total flux cleaned = 0.000808607 Jy
! Component: 200  -  total flux cleaned = 0.000977999 Jy
! Total flux subtracted in 200 components = 0.000977999 Jy
! Clean residual min=-0.004258 max=0.003199 Jy/beam
! Clean residual mean=0.000003 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.220467 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.220467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067925Jy  sigma=1.210064
! Fit after  self-cal, rms=0.067953Jy  sigma=1.209779
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067953Jy  sigma=1.209779
! Fit after  self-cal, rms=0.068115Jy  sigma=1.209684
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.62 mas, bmaj=12.64 mas, bpa=60.67 degrees
! Estimated noise=0.858817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254138 Jy
! Component: 100  -  total flux cleaned = -7.14e-05 Jy
! Component: 150  -  total flux cleaned = 7.71566e-05 Jy
! Component: 200  -  total flux cleaned = 0.000143374 Jy
! Total flux subtracted in 200 components = 0.000143374 Jy
! Clean residual min=-0.004227 max=0.003245 Jy/beam
! Clean residual mean=0.000002 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.22061 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 71 components and 0.22061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068086Jy  sigma=1.209162
! Fit after  self-cal, rms=0.068087Jy  sigma=1.209093
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.1528e-05 Jy
! Component: 100  -  total flux cleaned = 5.00429e-05 Jy
! Component: 150  -  total flux cleaned = 8.7851e-05 Jy
! Component: 200  -  total flux cleaned = 8.72259e-05 Jy
! Total flux subtracted in 200 components = 8.72259e-05 Jy
! Clean residual min=-0.004199 max=0.003241 Jy/beam
! Clean residual mean=0.000002 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.220697 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.220697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068073Jy  sigma=1.208857
! Fit after  self-cal, rms=0.068074Jy  sigma=1.208822
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068074Jy  sigma=1.208822
! Fit after  self-cal, rms=0.068167Jy  sigma=1.208772
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.621 mas, bmaj=12.65 mas, bpa=60.69 degrees
! Estimated noise=0.858366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140345 Jy
! Component: 100  -  total flux cleaned = -0.000103503 Jy
! Component: 150  -  total flux cleaned = -5.72639e-05 Jy
! Component: 200  -  total flux cleaned = -4.31307e-05 Jy
! Total flux subtracted in 200 components = -4.31307e-05 Jy
! Clean residual min=-0.004191 max=0.003245 Jy/beam
! Clean residual mean=0.000002 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.220654 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.220654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068158Jy  sigma=1.208570
! Fit after  self-cal, rms=0.068159Jy  sigma=1.208554
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.99965e-07 Jy
! Component: 100  -  total flux cleaned = 4.14357e-05 Jy
! Component: 150  -  total flux cleaned = 6.7301e-05 Jy
! Component: 200  -  total flux cleaned = 6.59905e-05 Jy
! Total flux subtracted in 200 components = 6.59905e-05 Jy
! Clean residual min=-0.004164 max=0.003232 Jy/beam
! Clean residual mean=0.000002 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.22072 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 89 components and 0.22072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068154Jy  sigma=1.208459
! Fit after  self-cal, rms=0.068155Jy  sigma=1.208449
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068155Jy  sigma=1.208449
! Fit after  self-cal, rms=0.068220Jy  sigma=1.208426
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.471 mas, bmaj=24.97 mas, bpa=49.18 degrees
! Estimated noise=1.09031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427798 Jy
! Component: 100  -  total flux cleaned = 0.000444881 Jy
! Component: 150  -  total flux cleaned = 0.000527988 Jy
! Component: 200  -  total flux cleaned = 0.000606146 Jy
! Total flux subtracted in 200 components = 0.000606146 Jy
! Clean residual min=-0.003150 max=0.002521 Jy/beam
! Clean residual mean=0.000001 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.221326 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 99 components and 0.221326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068217Jy  sigma=1.208438
! Fit after  self-cal, rms=0.068218Jy  sigma=1.208410
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017791 Jy
! Component: 100  -  total flux cleaned = 0.000207263 Jy
! Component: 150  -  total flux cleaned = 0.000262612 Jy
! Component: 200  -  total flux cleaned = 0.00032898 Jy
! Total flux subtracted in 200 components = 0.00032898 Jy
! Clean residual min=-0.003117 max=0.002511 Jy/beam
! Clean residual mean=-0.000000 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.221655 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 0.221655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068218Jy  sigma=1.208458
! Fit after  self-cal, rms=0.068219Jy  sigma=1.208446
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.622 mas, bmaj=12.66 mas, bpa=60.7 degrees
! Estimated noise=0.858015 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.622 x 12.66 at 60.7 degrees (North through East)
! Clean map  min=-0.0038833  max=0.18519 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.099 mas, bmaj=11.77 mas, bpa=60.48 degrees
! Estimated noise=1.71736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13587 Jy
! Component: 100  -  total flux cleaned = 0.168257 Jy
! Component: 150  -  total flux cleaned = 0.182986 Jy
! Component: 200  -  total flux cleaned = 0.192508 Jy
! Total flux subtracted in 200 components = 0.192508 Jy
! Clean residual min=-0.008955 max=0.008468 Jy/beam
! Clean residual mean=0.000008 rms=0.002293 Jy/beam
! Combined flux in latest and established models = 0.192508 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.192508 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.622 mas, bmaj=12.66 mas, bpa=60.7 degrees
! Estimated noise=0.858015 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012162 Jy
! Component: 100  -  total flux cleaned = 0.0186703 Jy
! Component: 150  -  total flux cleaned = 0.0227675 Jy
! Component: 200  -  total flux cleaned = 0.02538 Jy
! Total flux subtracted in 200 components = 0.02538 Jy
! Clean residual min=-0.004890 max=0.003451 Jy/beam
! Clean residual mean=0.000005 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.217888 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 49 components and 0.217888 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.471 mas, bmaj=24.97 mas, bpa=49.18 degrees
! Estimated noise=1.09031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253695 Jy
! Component: 100  -  total flux cleaned = 0.00346913 Jy
! Component: 150  -  total flux cleaned = 0.00358218 Jy
! Component: 200  -  total flux cleaned = 0.00370813 Jy
! Total flux subtracted in 200 components = 0.00370813 Jy
! Clean residual min=-0.003544 max=0.002856 Jy/beam
! Clean residual mean=-0.000001 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.221596 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137577 Jy
! Component: 100  -  total flux cleaned = 0.000221562 Jy
! Component: 150  -  total flux cleaned = 0.000299931 Jy
! Component: 200  -  total flux cleaned = 0.00037302 Jy
! Total flux subtracted in 200 components = 0.00037302 Jy
! Clean residual min=-0.003417 max=0.002858 Jy/beam
! Clean residual mean=-0.000002 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.221969 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 83 components and 0.221969 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.622 mas, bmaj=12.66 mas, bpa=60.7 degrees
! Estimated noise=0.858015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000614618 Jy
! Component: 100  -  total flux cleaned = -0.000558579 Jy
! Component: 150  -  total flux cleaned = -0.000415229 Jy
! Component: 200  -  total flux cleaned = -0.000371081 Jy
! Total flux subtracted in 200 components = -0.000371081 Jy
! Clean residual min=-0.004452 max=0.003194 Jy/beam
! Clean residual mean=-0.000001 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.221598 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.221598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068274Jy  sigma=1.209312
! Fit after  self-cal, rms=0.068255Jy  sigma=1.209257
wmodel /J0739+7527_S_map.mod
! wmodel: Unable to open new model file: /J0739+7527_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0739+7527_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.622 x 12.66 at 60.7 degrees (North through East)
! Clean map  min=-0.0041749  max=0.18386 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0739+7527_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.183863 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000826503 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.34856 1.34856 2.69712 5.39425 10.7885 21.577 43.154 86.3079
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.183 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  222.459 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0739+7527_S_dfm.log closed on Thu May 19 23:57:31 2016