! Started logfile: /scr/pima/bg219a_uvs/J0730-3208_X_dfm.log on Thu May 19 23:57:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0730-3208_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0730-3208_X_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.966667 visibilities/baseline/integration-bin.
! Found source: J0730-3208
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 9048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0730-3208_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007799Jy  sigma=24.552048
! Fit after  self-cal, rms=0.926345Jy  sigma=22.397153
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5381 mas, bmaj=1.533 mas, bpa=-3.248 degrees
! Estimated noise=0.603443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0459148 Jy
! Component: 100  -  total flux cleaned = 0.0651442 Jy
! Total flux subtracted in 100 components = 0.0651442 Jy
! Clean residual min=-0.012443 max=0.017273 Jy/beam
! Clean residual mean=-0.000011 rms=0.003326 Jy/beam
! Combined flux in latest and established models = 0.0651442 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0651442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085644Jy  sigma=2.129506
! Fit after  self-cal, rms=0.084938Jy  sigma=2.111498
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.667 mas, bmaj=1.81 mas, bpa=-1.933 degrees
! Estimated noise=0.320519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0326436 Jy
! Component: 100  -  total flux cleaned = 0.0505348 Jy
! Component: 150  -  total flux cleaned = 0.0605204 Jy
! Component: 200  -  total flux cleaned = 0.0661047 Jy
! Total flux subtracted in 200 components = 0.0661047 Jy
! Clean residual min=-0.013525 max=0.030252 Jy/beam
! Clean residual mean=0.000029 rms=0.005131 Jy/beam
! Combined flux in latest and established models = 0.131249 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 0.131249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072730Jy  sigma=1.779248
! Fit after  self-cal, rms=0.072363Jy  sigma=1.766890
! Inverting map 
! Added new window around map position (1.6, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0247623 Jy
! Component: 100  -  total flux cleaned = 0.0362218 Jy
! Component: 150  -  total flux cleaned = 0.0439969 Jy
! Component: 200  -  total flux cleaned = 0.0469792 Jy
! Total flux subtracted in 200 components = 0.0469792 Jy
! Clean residual min=-0.009344 max=0.016883 Jy/beam
! Clean residual mean=0.000013 rms=0.002914 Jy/beam
! Combined flux in latest and established models = 0.178228 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 59 components and 0.178228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064087Jy  sigma=1.541395
! Fit after  self-cal, rms=0.061022Jy  sigma=1.462934
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.667 x 1.81 at -1.933 degrees (North through East)
! Clean map  min=-0.0076025  max=0.067759 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.061022Jy  sigma=1.462934
! Fit after  self-cal, rms=0.061022Jy  sigma=1.462934
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.667 mas, bmaj=1.81 mas, bpa=-1.933 degrees
! Estimated noise=0.320519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138069 Jy
! Component: 100  -  total flux cleaned = 0.0183677 Jy
! Component: 150  -  total flux cleaned = 0.0197005 Jy
! Component: 200  -  total flux cleaned = 0.0201263 Jy
! Total flux subtracted in 200 components = 0.0201263 Jy
! Clean residual min=-0.005053 max=0.009876 Jy/beam
! Clean residual mean=0.000009 rms=0.001617 Jy/beam
! Combined flux in latest and established models = 0.198354 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.198354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058087Jy  sigma=1.382756
! Fit after  self-cal, rms=0.057194Jy  sigma=1.360353
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057194Jy  sigma=1.360353
! Fit after  self-cal, rms=0.056841Jy  sigma=1.353823
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6608 mas, bmaj=1.801 mas, bpa=-1.831 degrees
! Estimated noise=0.317127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418006 Jy
! Component: 100  -  total flux cleaned = 0.00499363 Jy
! Component: 150  -  total flux cleaned = 0.00469416 Jy
! Component: 200  -  total flux cleaned = 0.00443898 Jy
! Total flux subtracted in 200 components = 0.00443898 Jy
! Clean residual min=-0.003312 max=0.004863 Jy/beam
! Clean residual mean=0.000003 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.202793 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.202793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056166Jy  sigma=1.336752
! Fit after  self-cal, rms=0.056011Jy  sigma=1.333097
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300616 Jy
! Component: 100  -  total flux cleaned = 0.00357526 Jy
! Component: 150  -  total flux cleaned = 0.00351798 Jy
! Component: 200  -  total flux cleaned = 0.00335189 Jy
! Total flux subtracted in 200 components = 0.00335189 Jy
! Clean residual min=-0.002606 max=0.003653 Jy/beam
! Clean residual mean=0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.206145 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.206145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055741Jy  sigma=1.325959
! Fit after  self-cal, rms=0.055682Jy  sigma=1.324540
! Inverting map 
! Added new window around map position (-1, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125523 Jy
! Component: 100  -  total flux cleaned = 0.00220188 Jy
! Component: 150  -  total flux cleaned = 0.00261502 Jy
! Component: 200  -  total flux cleaned = 0.00295826 Jy
! Total flux subtracted in 200 components = 0.00295826 Jy
! Clean residual min=-0.002280 max=0.001748 Jy/beam
! Clean residual mean=0.000002 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.209104 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 102 components and 0.209104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055459Jy  sigma=1.318990
! Fit after  self-cal, rms=0.055430Jy  sigma=1.318446
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055430Jy  sigma=1.318446
! Fit after  self-cal, rms=0.055284Jy  sigma=1.309174
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6595 mas, bmaj=1.804 mas, bpa=-1.813 degrees
! Estimated noise=0.317328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00078951 Jy
! Component: 100  -  total flux cleaned = 0.00103531 Jy
! Component: 150  -  total flux cleaned = 0.00111829 Jy
! Component: 200  -  total flux cleaned = 0.00119044 Jy
! Total flux subtracted in 200 components = 0.00119044 Jy
! Clean residual min=-0.001750 max=0.001785 Jy/beam
! Clean residual mean=0.000001 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.210294 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 110 components and 0.210294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055215Jy  sigma=1.307373
! Fit after  self-cal, rms=0.055225Jy  sigma=1.306950
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.06885e-05 Jy
! Component: 100  -  total flux cleaned = -0.000103958 Jy
! Component: 150  -  total flux cleaned = -0.000104814 Jy
! Component: 200  -  total flux cleaned = -7.80262e-05 Jy
! Total flux subtracted in 200 components = -7.80262e-05 Jy
! Clean residual min=-0.001693 max=0.001744 Jy/beam
! Clean residual mean=0.000001 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.210216 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 117 components and 0.210216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055192Jy  sigma=1.306105
! Fit after  self-cal, rms=0.055186Jy  sigma=1.306028
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055186Jy  sigma=1.306028
! Fit after  self-cal, rms=0.055302Jy  sigma=1.305935
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.963 mas, bmaj=6.301 mas, bpa=-1.393 degrees
! Estimated noise=0.466397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00062734 Jy
! Component: 100  -  total flux cleaned = 0.000544729 Jy
! Component: 150  -  total flux cleaned = 0.00052707 Jy
! Component: 200  -  total flux cleaned = 0.000511556 Jy
! Total flux subtracted in 200 components = 0.000511556 Jy
! Clean residual min=-0.001414 max=0.001508 Jy/beam
! Clean residual mean=0.000003 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.210728 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 123 components and 0.210728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055297Jy  sigma=1.305801
! Fit after  self-cal, rms=0.055294Jy  sigma=1.305722
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.75802e-05 Jy
! Component: 100  -  total flux cleaned = -2.32092e-05 Jy
! Component: 150  -  total flux cleaned = -4.58578e-05 Jy
! Component: 200  -  total flux cleaned = -4.58191e-05 Jy
! Total flux subtracted in 200 components = -4.58191e-05 Jy
! Clean residual min=-0.001404 max=0.001523 Jy/beam
! Clean residual mean=0.000003 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.210682 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 124 components and 0.210682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055295Jy  sigma=1.305745
! Fit after  self-cal, rms=0.055294Jy  sigma=1.305719
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6602 mas, bmaj=1.803 mas, bpa=-1.823 degrees
! Estimated noise=0.318036 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6602 x 1.803 at -1.823 degrees (North through East)
! Clean map  min=-0.003292  max=0.066451 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5343 mas, bmaj=1.532 mas, bpa=-3.089 degrees
! Estimated noise=0.595821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0478173 Jy
! Component: 100  -  total flux cleaned = 0.0747026 Jy
! Component: 150  -  total flux cleaned = 0.0950104 Jy
! Component: 200  -  total flux cleaned = 0.111049 Jy
! Total flux subtracted in 200 components = 0.111049 Jy
! Clean residual min=-0.009937 max=0.010845 Jy/beam
! Clean residual mean=-0.000006 rms=0.002366 Jy/beam
! Combined flux in latest and established models = 0.111049 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.111049 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6602 mas, bmaj=1.803 mas, bpa=-1.823 degrees
! Estimated noise=0.318036 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0261638 Jy
! Component: 100  -  total flux cleaned = 0.0436876 Jy
! Component: 150  -  total flux cleaned = 0.0565097 Jy
! Component: 200  -  total flux cleaned = 0.0661229 Jy
! Total flux subtracted in 200 components = 0.0661229 Jy
! Clean residual min=-0.005638 max=0.006265 Jy/beam
! Clean residual mean=0.000008 rms=0.001876 Jy/beam
! Combined flux in latest and established models = 0.177172 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 87 components and 0.177172 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.963 mas, bmaj=6.301 mas, bpa=-1.393 degrees
! Estimated noise=0.466397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147949 Jy
! Component: 100  -  total flux cleaned = 0.0226724 Jy
! Component: 150  -  total flux cleaned = 0.0273338 Jy
! Component: 200  -  total flux cleaned = 0.030158 Jy
! Total flux subtracted in 200 components = 0.030158 Jy
! Clean residual min=-0.002188 max=0.002171 Jy/beam
! Clean residual mean=0.000006 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.20733 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176779 Jy
! Component: 100  -  total flux cleaned = 0.00292613 Jy
! Component: 150  -  total flux cleaned = 0.00362236 Jy
! Component: 200  -  total flux cleaned = 0.00379341 Jy
! Total flux subtracted in 200 components = 0.00379341 Jy
! Clean residual min=-0.001567 max=0.001861 Jy/beam
! Clean residual mean=0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.211123 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 131 components and 0.211123 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6602 mas, bmaj=1.803 mas, bpa=-1.823 degrees
! Estimated noise=0.318036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103436 Jy
! Component: 100  -  total flux cleaned = 0.00126063 Jy
! Component: 150  -  total flux cleaned = 0.00119198 Jy
! Component: 200  -  total flux cleaned = 0.00107322 Jy
! Total flux subtracted in 200 components = 0.00107322 Jy
! Clean residual min=-0.002081 max=0.002073 Jy/beam
! Clean residual mean=-0.000001 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.212196 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 151 components and 0.212196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055408Jy  sigma=1.308580
! Fit after  self-cal, rms=0.055312Jy  sigma=1.306638
wmodel /J0730-3208_X_map.mod
! wmodel: Unable to open new model file: /J0730-3208_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0730-3208_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6602 x 1.803 at -1.823 degrees (North through East)
! Clean map  min=-0.0016208  max=0.071317 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0730-3208_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0713174 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000429859 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.80822 1.80822 3.61644 7.23289 14.4658 28.9315 57.8631
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  165.908 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0730-3208_X_dfm.log closed on Thu May 19 23:57:13 2016