! Started logfile: /scr/pima/bg219a_uvs/J0730-1141_X_dfm.log on Thu May 19 23:57:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0730-1141_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0730-1141_X_uva.fits
! AN table 1: 55 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.869091 visibilities/baseline/integration-bin.
! Found source: J0730-1141
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 8604 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0730-1141_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=4.682626Jy  sigma=41.801532
! Fit after  self-cal, rms=3.519308Jy  sigma=31.543991
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5441 mas, bmaj=1.595 mas, bpa=-2.04 degrees
! Estimated noise=2.26741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.24114 Jy
! Component: 100  -  total flux cleaned = 3.95277 Jy
! Total flux subtracted in 100 components = 3.95277 Jy
! Clean residual min=-0.161784 max=0.225867 Jy/beam
! Clean residual mean=0.000023 rms=0.034383 Jy/beam
! Combined flux in latest and established models = 3.95277 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 3.95277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.860267Jy  sigma=7.818708
! Fit after  self-cal, rms=0.860089Jy  sigma=7.818388
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.24827 Jy
! Component: 100  -  total flux cleaned = 0.39663 Jy
! Total flux subtracted in 100 components = 0.39663 Jy
! Clean residual min=-0.102689 max=0.119966 Jy/beam
! Clean residual mean=-0.000046 rms=0.021102 Jy/beam
! Combined flux in latest and established models = 4.3494 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 4.3494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.691378Jy  sigma=6.270868
! Fit after  self-cal, rms=0.691363Jy  sigma=6.270768
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6857 mas, bmaj=1.809 mas, bpa=-4.664 degrees
! Estimated noise=1.09761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.247016 Jy
! Component: 100  -  total flux cleaned = 0.374098 Jy
! Component: 150  -  total flux cleaned = 0.450919 Jy
! Component: 200  -  total flux cleaned = 0.497871 Jy
! Total flux subtracted in 200 components = 0.497871 Jy
! Clean residual min=-0.076233 max=0.086812 Jy/beam
! Clean residual mean=-0.000178 rms=0.024635 Jy/beam
! Combined flux in latest and established models = 4.84727 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 4.84727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.598719Jy  sigma=5.409933
! Fit after  self-cal, rms=0.598689Jy  sigma=5.409512
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6857 x 1.809 at -4.664 degrees (North through East)
! Clean map  min=-0.070882  max=4.4085 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        1.02     OV        1.03     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        1.01     OV        1.03     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.98     NL        1.05     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.99     NL        1.08     OV        1.05     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.00     NL        1.02     OV        1.04     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        1.01     OV        1.02     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        1.02     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.02     OV        1.03     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.00     NL        1.01     OV        1.01     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.02     OV        1.08     
!   PT        0.95     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.598689Jy  sigma=5.409512
! Fit after  self-cal, rms=0.600612Jy  sigma=5.159860
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6799 mas, bmaj=1.796 mas, bpa=-4.654 degrees
! Estimated noise=1.10622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00323264 Jy
! Component: 100  -  total flux cleaned = 0.00471817 Jy
! Component: 150  -  total flux cleaned = 0.00567844 Jy
! Component: 200  -  total flux cleaned = 0.00655029 Jy
! Total flux subtracted in 200 components = 0.00655029 Jy
! Clean residual min=-0.056867 max=0.052029 Jy/beam
! Clean residual mean=-0.000028 rms=0.012260 Jy/beam
! Combined flux in latest and established models = 4.85382 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 40 components and 4.85382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.599820Jy  sigma=5.159226
! Fit after  self-cal, rms=0.599801Jy  sigma=5.159105
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.599801Jy  sigma=5.159105
! Fit after  self-cal, rms=0.596209Jy  sigma=5.038289
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6804 mas, bmaj=1.799 mas, bpa=-4.774 degrees
! Estimated noise=1.10701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000943782 Jy
! Component: 100  -  total flux cleaned = 0.00151905 Jy
! Component: 150  -  total flux cleaned = 0.00176057 Jy
! Component: 200  -  total flux cleaned = 0.00175486 Jy
! Total flux subtracted in 200 components = 0.00175486 Jy
! Clean residual min=-0.024923 max=0.046576 Jy/beam
! Clean residual mean=-0.000049 rms=0.008001 Jy/beam
! Combined flux in latest and established models = 4.85558 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 4.85558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.595583Jy  sigma=5.038583
! Fit after  self-cal, rms=0.595575Jy  sigma=5.038447
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0406496 Jy
! Component: 100  -  total flux cleaned = 0.0595416 Jy
! Component: 150  -  total flux cleaned = 0.0722644 Jy
! Component: 200  -  total flux cleaned = 0.0790098 Jy
! Total flux subtracted in 200 components = 0.0790098 Jy
! Clean residual min=-0.015980 max=0.018224 Jy/beam
! Clean residual mean=-0.000014 rms=0.004141 Jy/beam
! Combined flux in latest and established models = 4.93459 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 67 components and 4.93459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.591031Jy  sigma=5.028989
! Fit after  self-cal, rms=0.590311Jy  sigma=5.023907
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.590311Jy  sigma=5.023907
! Fit after  self-cal, rms=0.591194Jy  sigma=5.019047
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6808 mas, bmaj=1.8 mas, bpa=-4.835 degrees
! Estimated noise=1.10677 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169398 Jy
! Component: 100  -  total flux cleaned = 0.0252335 Jy
! Component: 150  -  total flux cleaned = 0.0288756 Jy
! Component: 200  -  total flux cleaned = 0.0322518 Jy
! Total flux subtracted in 200 components = 0.0322518 Jy
! Clean residual min=-0.015175 max=0.014982 Jy/beam
! Clean residual mean=-0.000019 rms=0.003543 Jy/beam
! Combined flux in latest and established models = 4.96684 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 4.96684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.589997Jy  sigma=5.018003
! Fit after  self-cal, rms=0.589842Jy  sigma=5.017184
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045178 Jy
! Component: 100  -  total flux cleaned = 0.00680306 Jy
! Component: 150  -  total flux cleaned = 0.00770806 Jy
! Component: 200  -  total flux cleaned = 0.00834063 Jy
! Total flux subtracted in 200 components = 0.00834063 Jy
! Clean residual min=-0.014646 max=0.014082 Jy/beam
! Clean residual mean=-0.000015 rms=0.003346 Jy/beam
! Combined flux in latest and established models = 4.97518 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 4.97518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.589435Jy  sigma=5.017292
! Fit after  self-cal, rms=0.589391Jy  sigma=5.017169
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.589391Jy  sigma=5.017169
! Fit after  self-cal, rms=0.589913Jy  sigma=5.015509
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.838 mas, bmaj=4.985 mas, bpa=-11.4 degrees
! Estimated noise=1.70065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010567 Jy
! Component: 100  -  total flux cleaned = 0.0109943 Jy
! Component: 150  -  total flux cleaned = 0.0116595 Jy
! Component: 200  -  total flux cleaned = 0.0124525 Jy
! Total flux subtracted in 200 components = 0.0124525 Jy
! Clean residual min=-0.011328 max=0.013833 Jy/beam
! Clean residual mean=-0.000052 rms=0.003669 Jy/beam
! Combined flux in latest and established models = 4.98763 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 87 components and 4.98763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.589664Jy  sigma=5.016778
! Fit after  self-cal, rms=0.589611Jy  sigma=5.016431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310182 Jy
! Component: 100  -  total flux cleaned = 0.00318025 Jy
! Component: 150  -  total flux cleaned = 0.00317632 Jy
! Component: 200  -  total flux cleaned = 0.00311297 Jy
! Total flux subtracted in 200 components = 0.00311297 Jy
! Clean residual min=-0.012039 max=0.013134 Jy/beam
! Clean residual mean=-0.000047 rms=0.003499 Jy/beam
! Combined flux in latest and established models = 4.99074 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 91 components and 4.99074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.589527Jy  sigma=5.017081
! Fit after  self-cal, rms=0.589519Jy  sigma=5.017043
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.681 mas, bmaj=1.801 mas, bpa=-4.882 degrees
! Estimated noise=1.10723 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.681 x 1.801 at -4.882 degrees (North through East)
! Clean map  min=-0.012683  max=4.4075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.589519Jy  sigma=5.017043
! Fit after  self-cal, rms=0.551903Jy  sigma=4.736609
! Inverting map and beam 
! Estimated beam: bmin=0.6818 mas, bmaj=1.798 mas, bpa=-4.626 degrees
! Estimated noise=1.08228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0767537 Jy
! Component: 100  -  total flux cleaned = -0.082236 Jy
! Component: 150  -  total flux cleaned = -0.086456 Jy
! Component: 200  -  total flux cleaned = -0.0898285 Jy
! Total flux subtracted in 200 components = -0.0898285 Jy
! Clean residual min=-0.033163 max=0.029577 Jy/beam
! Clean residual mean=-0.000076 rms=0.006853 Jy/beam
! Combined flux in latest and established models = 4.90091 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 4.90091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.540565Jy  sigma=4.640299
! Fit after  self-cal, rms=0.540355Jy  sigma=4.637921
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693152 Jy
! Component: 100  -  total flux cleaned = 0.00786047 Jy
! Component: 150  -  total flux cleaned = 0.00873822 Jy
! Component: 200  -  total flux cleaned = 0.00914497 Jy
! Total flux subtracted in 200 components = 0.00914497 Jy
! Clean residual min=-0.031671 max=0.026692 Jy/beam
! Clean residual mean=-0.000069 rms=0.006434 Jy/beam
! Combined flux in latest and established models = 4.91006 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 106 components and 4.91006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.539463Jy  sigma=4.630770
! Fit after  self-cal, rms=0.539355Jy  sigma=4.629657
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.539355Jy  sigma=4.629657
! Fit after  self-cal, rms=0.529914Jy  sigma=4.541899
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5382 mas, bmaj=1.58 mas, bpa=-2.01 degrees
! Estimated noise=2.26194 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.13824 Jy
! Component: 100  -  total flux cleaned = 3.82408 Jy
! Component: 150  -  total flux cleaned = 4.0497 Jy
! Component: 200  -  total flux cleaned = 4.18657 Jy
! Total flux subtracted in 200 components = 4.18657 Jy
! Clean residual min=-0.076011 max=0.106559 Jy/beam
! Clean residual mean=-0.000061 rms=0.017036 Jy/beam
! Combined flux in latest and established models = 4.18657 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 4.18657 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6827 mas, bmaj=1.799 mas, bpa=-4.527 degrees
! Estimated noise=1.06098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195547 Jy
! Component: 100  -  total flux cleaned = 0.30325 Jy
! Component: 150  -  total flux cleaned = 0.37475 Jy
! Component: 200  -  total flux cleaned = 0.427151 Jy
! Total flux subtracted in 200 components = 0.427151 Jy
! Clean residual min=-0.042632 max=0.050626 Jy/beam
! Clean residual mean=-0.000106 rms=0.014183 Jy/beam
! Combined flux in latest and established models = 4.61372 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 45 components and 4.61372 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.838 mas, bmaj=4.976 mas, bpa=-11.12 degrees
! Estimated noise=1.62338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0879304 Jy
! Component: 100  -  total flux cleaned = 0.137563 Jy
! Component: 150  -  total flux cleaned = 0.16891 Jy
! Component: 200  -  total flux cleaned = 0.189266 Jy
! Total flux subtracted in 200 components = 0.189266 Jy
! Clean residual min=-0.041833 max=0.047361 Jy/beam
! Clean residual mean=-0.000193 rms=0.015576 Jy/beam
! Combined flux in latest and established models = 4.80299 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137223 Jy
! Component: 100  -  total flux cleaned = 0.0230681 Jy
! Component: 150  -  total flux cleaned = 0.0250754 Jy
! Component: 200  -  total flux cleaned = 0.0261007 Jy
! Total flux subtracted in 200 components = 0.0261007 Jy
! Clean residual min=-0.039075 max=0.042675 Jy/beam
! Clean residual mean=-0.000173 rms=0.013668 Jy/beam
! Combined flux in latest and established models = 4.82909 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 80 components and 4.82909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6827 mas, bmaj=1.799 mas, bpa=-4.527 degrees
! Estimated noise=1.06098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00612173 Jy
! Component: 100  -  total flux cleaned = -0.00554858 Jy
! Component: 150  -  total flux cleaned = -0.00505131 Jy
! Component: 200  -  total flux cleaned = -0.00412859 Jy
! Total flux subtracted in 200 components = -0.00412859 Jy
! Clean residual min=-0.029362 max=0.030025 Jy/beam
! Clean residual mean=-0.000063 rms=0.006565 Jy/beam
! Combined flux in latest and established models = 4.82496 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 86 components and 4.82496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.519895Jy  sigma=4.457637
! Fit after  self-cal, rms=0.519496Jy  sigma=4.452523
wmodel /J0730-1141_X_map.mod
! wmodel: Unable to open new model file: /J0730-1141_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0730-1141_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6827 x 1.799 at -4.527 degrees (North through East)
! Clean map  min=-0.025818  max=4.2069 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0730-1141_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 4.20695 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00609281 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.434482 0.434482 0.868963 1.73793 3.47585 6.9517 13.9034 27.8068 55.6136
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0182 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       4.206 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  690.478 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0730-1141_X_dfm.log closed on Thu May 19 23:57:06 2016