! Started logfile: /scr/pima/bg219a_uvs/J0714+7408_S_dfm.log on Thu May 19 23:56:13 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0714+7408_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0714+7408_S_uva.fits
! AN table 1: 18 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.938889 visibilities/baseline/integration-bin.
! Found source: J0714+7408
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 676 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0714+7408_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.992567Jy  sigma=22.883527
! Fit after  self-cal, rms=0.848565Jy  sigma=19.570544
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.574 mas, bmaj=16.95 mas, bpa=62.85 degrees
! Estimated noise=1.95198 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117393 Jy
! Component: 100  -  total flux cleaned = 0.143055 Jy
! Total flux subtracted in 100 components = 0.143055 Jy
! Clean residual min=-0.006673 max=0.007723 Jy/beam
! Clean residual mean=0.000001 rms=0.002266 Jy/beam
! Combined flux in latest and established models = 0.143055 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.143055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052137Jy  sigma=1.170993
! Fit after  self-cal, rms=0.052131Jy  sigma=1.170901
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.939 mas, bmaj=17.81 mas, bpa=61.81 degrees
! Estimated noise=1.27537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00606758 Jy
! Component: 100  -  total flux cleaned = 0.00786926 Jy
! Component: 150  -  total flux cleaned = 0.0082754 Jy
! Component: 200  -  total flux cleaned = 0.0065993 Jy
! Total flux subtracted in 200 components = 0.0065993 Jy
! Clean residual min=-0.002153 max=0.002167 Jy/beam
! Clean residual mean=-0.000003 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.149654 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 65 components and 0.149654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049835Jy  sigma=1.119076
! Fit after  self-cal, rms=0.049804Jy  sigma=1.118193
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.939 x 17.81 at 61.81 degrees (North through East)
! Clean map  min=-0.0037543  max=0.14317 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        0.93     OV        0.98     
!   PT        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.00     NL        1.02     OV        1.01     
!   PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.02     NL        0.97     OV        1.00     
!   PT        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.02     OV        0.98     
!   PT        1.02     
! 
! 
! Fit before self-cal, rms=0.049804Jy  sigma=1.118193
! Fit after  self-cal, rms=0.049156Jy  sigma=1.109354
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=17.76 mas, bpa=61.74 degrees
! Estimated noise=1.26361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000954442 Jy
! Component: 100  -  total flux cleaned = 0.00217182 Jy
! Component: 150  -  total flux cleaned = 0.00265607 Jy
! Component: 200  -  total flux cleaned = 0.00308472 Jy
! Total flux subtracted in 200 components = 0.00308472 Jy
! Clean residual min=-0.001117 max=0.001122 Jy/beam
! Clean residual mean=-0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.152739 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 113 components and 0.152739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048867Jy  sigma=1.103221
! Fit after  self-cal, rms=0.048864Jy  sigma=1.102730
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048864Jy  sigma=1.102730
! Fit after  self-cal, rms=0.048817Jy  sigma=1.102518
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=17.75 mas, bpa=61.73 degrees
! Estimated noise=1.26218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200815 Jy
! Component: 100  -  total flux cleaned = 0.00068742 Jy
! Component: 150  -  total flux cleaned = 0.00106901 Jy
! Component: 200  -  total flux cleaned = 0.00137241 Jy
! Total flux subtracted in 200 components = 0.00137241 Jy
! Clean residual min=-0.000825 max=0.000821 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.154111 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 148 components and 0.154111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048689Jy  sigma=1.099927
! Fit after  self-cal, rms=0.048682Jy  sigma=1.099756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394569 Jy
! Component: 100  -  total flux cleaned = 0.000620676 Jy
! Component: 150  -  total flux cleaned = 0.000832199 Jy
! Component: 200  -  total flux cleaned = 0.000910638 Jy
! Total flux subtracted in 200 components = 0.000910638 Jy
! Clean residual min=-0.000649 max=0.000640 Jy/beam
! Clean residual mean=0.000000 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.155022 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 172 components and 0.155022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048607Jy  sigma=1.098281
! Fit after  self-cal, rms=0.048605Jy  sigma=1.098203
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048605Jy  sigma=1.098203
! Fit after  self-cal, rms=0.048556Jy  sigma=1.098099
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.945 mas, bmaj=17.75 mas, bpa=61.73 degrees
! Estimated noise=1.26092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000241674 Jy
! Component: 100  -  total flux cleaned = -0.00028188 Jy
! Component: 150  -  total flux cleaned = -0.000356526 Jy
! Component: 200  -  total flux cleaned = -0.000461805 Jy
! Total flux subtracted in 200 components = -0.000461805 Jy
! Clean residual min=-0.000578 max=0.000580 Jy/beam
! Clean residual mean=0.000000 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.15456 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 196 components and 0.15456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048501Jy  sigma=1.097017
! Fit after  self-cal, rms=0.048500Jy  sigma=1.096954
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116036 Jy
! Component: 100  -  total flux cleaned = 0.000212245 Jy
! Component: 150  -  total flux cleaned = 0.000305397 Jy
! Component: 200  -  total flux cleaned = 0.000364394 Jy
! Total flux subtracted in 200 components = 0.000364394 Jy
! Clean residual min=-0.000481 max=0.000485 Jy/beam
! Clean residual mean=0.000000 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.154924 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 228 components and 0.154924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048462Jy  sigma=1.096165
! Fit after  self-cal, rms=0.048462Jy  sigma=1.096131
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048462Jy  sigma=1.096131
! Fit after  self-cal, rms=0.048435Jy  sigma=1.096077
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.15 mas, bmaj=25.32 mas, bpa=45.65 degrees
! Estimated noise=1.60729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348602 Jy
! Component: 100  -  total flux cleaned = -0.000373759 Jy
! Component: 150  -  total flux cleaned = -0.000375597 Jy
! Component: 200  -  total flux cleaned = -0.000285908 Jy
! Total flux subtracted in 200 components = -0.000285908 Jy
! Clean residual min=-0.000367 max=0.000375 Jy/beam
! Clean residual mean=-0.000001 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.154638 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 286 components and 0.154638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048417Jy  sigma=1.095768
! Fit after  self-cal, rms=0.048418Jy  sigma=1.095721
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000154568 Jy
! Component: 100  -  total flux cleaned = -0.000177767 Jy
! Component: 150  -  total flux cleaned = -8.59507e-05 Jy
! Component: 200  -  total flux cleaned = 4.0084e-06 Jy
! Total flux subtracted in 200 components = 4.0084e-06 Jy
! Clean residual min=-0.000299 max=0.000300 Jy/beam
! Clean residual mean=-0.000001 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.154642 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 340 components and 0.154642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048407Jy  sigma=1.095486
! Fit after  self-cal, rms=0.048406Jy  sigma=1.095469
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.942 mas, bmaj=17.75 mas, bpa=61.74 degrees
! Estimated noise=1.26049 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.942 x 17.75 at 61.74 degrees (North through East)
! Clean map  min=-0.0023135  max=0.14164 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.576 mas, bmaj=16.93 mas, bpa=62.79 degrees
! Estimated noise=1.93309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116098 Jy
! Component: 100  -  total flux cleaned = 0.141499 Jy
! Component: 150  -  total flux cleaned = 0.14307 Jy
! Component: 200  -  total flux cleaned = 0.143859 Jy
! Total flux subtracted in 200 components = 0.143859 Jy
! Clean residual min=-0.003532 max=0.003546 Jy/beam
! Clean residual mean=-0.000000 rms=0.001268 Jy/beam
! Combined flux in latest and established models = 0.143859 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.143859 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.942 mas, bmaj=17.75 mas, bpa=61.74 degrees
! Estimated noise=1.26049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286375 Jy
! Component: 100  -  total flux cleaned = 0.00423301 Jy
! Component: 150  -  total flux cleaned = 0.00437536 Jy
! Component: 200  -  total flux cleaned = 0.00436905 Jy
! Total flux subtracted in 200 components = 0.00436905 Jy
! Clean residual min=-0.001964 max=0.001954 Jy/beam
! Clean residual mean=0.000002 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.148228 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 89 components and 0.148228 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.15 mas, bmaj=25.32 mas, bpa=45.65 degrees
! Estimated noise=1.60729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0014106 Jy
! Component: 100  -  total flux cleaned = -0.00155139 Jy
! Component: 150  -  total flux cleaned = -0.00197737 Jy
! Component: 200  -  total flux cleaned = -0.0023108 Jy
! Total flux subtracted in 200 components = -0.0023108 Jy
! Clean residual min=-0.000881 max=0.000878 Jy/beam
! Clean residual mean=-0.000005 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.145917 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00042436 Jy
! Component: 100  -  total flux cleaned = -0.000934616 Jy
! Component: 150  -  total flux cleaned = -0.00142974 Jy
! Component: 200  -  total flux cleaned = -0.00196638 Jy
! Total flux subtracted in 200 components = -0.00196638 Jy
! Clean residual min=-0.001180 max=0.001153 Jy/beam
! Clean residual mean=-0.000005 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.143951 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 167 components and 0.143951 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.942 mas, bmaj=17.75 mas, bpa=61.74 degrees
! Estimated noise=1.26049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000610396 Jy
! Component: 100  -  total flux cleaned = 0.00094287 Jy
! Component: 150  -  total flux cleaned = 0.00103886 Jy
! Component: 200  -  total flux cleaned = 0.0012626 Jy
! Total flux subtracted in 200 components = 0.0012626 Jy
! Clean residual min=-0.000719 max=0.000720 Jy/beam
! Clean residual mean=0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.145213 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 231 components and 0.145213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048505Jy  sigma=1.097746
! Fit after  self-cal, rms=0.048498Jy  sigma=1.097484
wmodel /J0714+7408_S_map.mod
! wmodel: Unable to open new model file: /J0714+7408_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0714+7408_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.942 x 17.75 at 61.74 degrees (North through East)
! Clean map  min=-0.0033321  max=0.14073 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0714+7408_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.140734 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000257154 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.54817 0.54817 1.09634 2.19268 4.38536 8.77071 17.5414 35.0829 70.1657
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  547.275 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0714+7408_S_dfm.log closed on Thu May 19 23:56:16 2016