! Started logfile: /scr/pima/bg219a_uvs/J0713+5053_S_dfm.log on Thu May 19 23:56:05 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0713+5053_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0713+5053_S_uva.fits ! AN table 1: 24 integrations on 15 of 15 possible baselines. ! AN table 2: 23 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.991489 visibilities/baseline/integration-bin. ! Found source: J0713+5053 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2796 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0713+5053_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.012672Jy sigma=25.907228 ! Fit after self-cal, rms=0.866492Jy sigma=22.499493 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=4.036 mas, bpa=69.17 degrees ! Estimated noise=0.930732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101256 Jy ! Component: 100 - total flux cleaned = 0.124372 Jy ! Total flux subtracted in 100 components = 0.124372 Jy ! Clean residual min=-0.007271 max=0.008348 Jy/beam ! Clean residual mean=-0.000031 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.124372 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.124372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057268Jy sigma=1.314619 ! Fit after self-cal, rms=0.057266Jy sigma=1.314473 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=5.049 mas, bpa=72.13 degrees ! Estimated noise=0.534019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102638 Jy ! Component: 100 - total flux cleaned = 0.0148497 Jy ! Component: 150 - total flux cleaned = 0.0173216 Jy ! Component: 200 - total flux cleaned = 0.0187401 Jy ! Total flux subtracted in 200 components = 0.0187401 Jy ! Clean residual min=-0.005834 max=0.004174 Jy/beam ! Clean residual mean=-0.000011 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.143112 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.143112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055134Jy sigma=1.275333 ! Fit after self-cal, rms=0.055142Jy sigma=1.275072 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.761 x 5.049 at 72.13 degrees (North through East) ! Clean map min=-0.0055235 max=0.13157 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 LA 0.99 MK 1.04 NL 1.06 ! OV 1.02 PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.06 MK 1.02 NL 0.98 OV 1.02 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.04 MK 1.05 NL 1.01 OV 1.00 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.04 MK 1.02 NL 0.94 OV 1.08 ! PT 1.01 SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00 MK 0.97 NL 1.00 OV 0.98 ! PT 1.01 SC 0.96 ! ! ! Fit before self-cal, rms=0.055142Jy sigma=1.275072 ! Fit after self-cal, rms=0.055325Jy sigma=1.265238 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=5.036 mas, bpa=71.46 degrees ! Estimated noise=0.541655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241094 Jy ! Component: 100 - total flux cleaned = 0.0037154 Jy ! Component: 150 - total flux cleaned = 0.00420525 Jy ! Component: 200 - total flux cleaned = 0.00432966 Jy ! Total flux subtracted in 200 components = 0.00432966 Jy ! Clean residual min=-0.005326 max=0.003623 Jy/beam ! Clean residual mean=-0.000041 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.147442 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.147442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055131Jy sigma=1.264109 ! Fit after self-cal, rms=0.055131Jy sigma=1.263966 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055131Jy sigma=1.263966 ! Fit after self-cal, rms=0.055475Jy sigma=1.262751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.728 mas, bmaj=5.019 mas, bpa=71.6 degrees ! Estimated noise=0.547026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161567 Jy ! Component: 100 - total flux cleaned = 0.0022207 Jy ! Component: 150 - total flux cleaned = 0.002391 Jy ! Component: 200 - total flux cleaned = 0.00241569 Jy ! Total flux subtracted in 200 components = 0.00241569 Jy ! Clean residual min=-0.005470 max=0.003611 Jy/beam ! Clean residual mean=-0.000051 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.149858 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.149858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055380Jy sigma=1.262123 ! Fit after self-cal, rms=0.055379Jy sigma=1.262098 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.31558e-05 Jy ! Component: 100 - total flux cleaned = 7.65556e-05 Jy ! Component: 150 - total flux cleaned = 9.94607e-05 Jy ! Component: 200 - total flux cleaned = 0.00012132 Jy ! Total flux subtracted in 200 components = 0.00012132 Jy ! Clean residual min=-0.005443 max=0.003561 Jy/beam ! Clean residual mean=-0.000051 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.149979 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.149979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055356Jy sigma=1.261758 ! Fit after self-cal, rms=0.055358Jy sigma=1.261748 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055358Jy sigma=1.261748 ! Fit after self-cal, rms=0.055118Jy sigma=1.255277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.007 mas, bpa=71.73 degrees ! Estimated noise=0.550935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101839 Jy ! Component: 100 - total flux cleaned = 0.00130638 Jy ! Component: 150 - total flux cleaned = 0.00132663 Jy ! Component: 200 - total flux cleaned = 0.00134573 Jy ! Total flux subtracted in 200 components = 0.00134573 Jy ! Clean residual min=-0.004379 max=0.003220 Jy/beam ! Clean residual mean=-0.000051 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.151325 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.151325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055075Jy sigma=1.255050 ! Fit after self-cal, rms=0.055066Jy sigma=1.254977 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.57379e-05 Jy ! Component: 100 - total flux cleaned = 6.32777e-05 Jy ! Component: 150 - total flux cleaned = 8.03537e-05 Jy ! Component: 200 - total flux cleaned = 8.03932e-05 Jy ! Total flux subtracted in 200 components = 8.03932e-05 Jy ! Clean residual min=-0.004389 max=0.003216 Jy/beam ! Clean residual mean=-0.000050 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.151405 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.151405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055053Jy sigma=1.254820 ! Fit after self-cal, rms=0.055055Jy sigma=1.254815 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055055Jy sigma=1.254815 ! Fit after self-cal, rms=0.055261Jy sigma=1.254573 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.222 mas, bmaj=12.08 mas, bpa=57.34 degrees ! Estimated noise=0.707955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170791 Jy ! Component: 100 - total flux cleaned = 0.00244097 Jy ! Component: 150 - total flux cleaned = 0.00251371 Jy ! Component: 200 - total flux cleaned = 0.00256681 Jy ! Total flux subtracted in 200 components = 0.00256681 Jy ! Clean residual min=-0.005410 max=0.004159 Jy/beam ! Clean residual mean=-0.000099 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.153972 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.153972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055216Jy sigma=1.255071 ! Fit after self-cal, rms=0.055213Jy sigma=1.255060 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.78092e-05 Jy ! Component: 100 - total flux cleaned = 0.000107933 Jy ! Component: 150 - total flux cleaned = 0.000157153 Jy ! Component: 200 - total flux cleaned = 0.000220439 Jy ! Total flux subtracted in 200 components = 0.000220439 Jy ! Clean residual min=-0.005369 max=0.004116 Jy/beam ! Clean residual mean=-0.000097 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.154192 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.154192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055210Jy sigma=1.254928 ! Fit after self-cal, rms=0.055210Jy sigma=1.254916 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=4.999 mas, bpa=71.86 degrees ! Estimated noise=0.553726 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 4.999 at 71.86 degrees (North through East) ! Clean map min=-0.0044008 max=0.13257 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=4.01 mas, bpa=68.51 degrees ! Estimated noise=0.954443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103756 Jy ! Component: 100 - total flux cleaned = 0.128209 Jy ! Component: 150 - total flux cleaned = 0.138304 Jy ! Component: 200 - total flux cleaned = 0.143729 Jy ! Total flux subtracted in 200 components = 0.143729 Jy ! Clean residual min=-0.006165 max=0.005378 Jy/beam ! Clean residual mean=-0.000030 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.143729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.143729 Jy ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=4.999 mas, bpa=71.86 degrees ! Estimated noise=0.553726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422982 Jy ! Component: 100 - total flux cleaned = 0.00638184 Jy ! Component: 150 - total flux cleaned = 0.00754369 Jy ! Component: 200 - total flux cleaned = 0.00787352 Jy ! Total flux subtracted in 200 components = 0.00787352 Jy ! Clean residual min=-0.004543 max=0.003313 Jy/beam ! Clean residual mean=-0.000056 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.151603 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.151603 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.222 mas, bmaj=12.08 mas, bpa=57.34 degrees ! Estimated noise=0.707955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012995 Jy ! Component: 100 - total flux cleaned = 0.00152233 Jy ! Component: 150 - total flux cleaned = 0.00159329 Jy ! Component: 200 - total flux cleaned = 0.00166136 Jy ! Total flux subtracted in 200 components = 0.00166136 Jy ! Clean residual min=-0.005615 max=0.004295 Jy/beam ! Clean residual mean=-0.000104 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.153264 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.66777e-05 Jy ! Component: 100 - total flux cleaned = 0.000130889 Jy ! Component: 150 - total flux cleaned = 0.000214768 Jy ! Component: 200 - total flux cleaned = 0.000275144 Jy ! Total flux subtracted in 200 components = 0.000275144 Jy ! Clean residual min=-0.005560 max=0.004236 Jy/beam ! Clean residual mean=-0.000102 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.153539 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.153539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=4.999 mas, bpa=71.86 degrees ! Estimated noise=0.553726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00083972 Jy ! Component: 100 - total flux cleaned = -0.000923486 Jy ! Component: 150 - total flux cleaned = -0.000969507 Jy ! Component: 200 - total flux cleaned = -0.000949434 Jy ! Total flux subtracted in 200 components = -0.000949434 Jy ! Clean residual min=-0.004415 max=0.003164 Jy/beam ! Clean residual mean=-0.000053 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.15259 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.15259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055257Jy sigma=1.255324 ! Fit after self-cal, rms=0.055267Jy sigma=1.255291 wmodel /J0713+5053_S_map.mod ! wmodel: Unable to open new model file: /J0713+5053_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0713+5053_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 4.999 at 71.86 degrees (North through East) ! Clean map min=-0.0042806 max=0.13394 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0713+5053_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.133937 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000999468 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.23867 2.23867 4.47735 8.95469 17.9094 35.8188 71.6376 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.133 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 134.007 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0713+5053_S_dfm.log closed on Thu May 19 23:56:08 2016