! Started logfile: /scr/pima/bg219a_uvs/J0650+0358_X_dfm.log on Thu May 19 23:55:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0650+0358_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0650+0358_X_uva.fits
! AN table 1: 23 integrations on 10 of 10 possible baselines.
! AN table 2: 24 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.964407 visibilities/baseline/integration-bin.
! Found source: J0650+0358
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6828 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0650+0358_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.998999Jy  sigma=28.728366
! Fit after  self-cal, rms=0.883261Jy  sigma=25.165959
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7093 mas, bmaj=1.652 mas, bpa=-4.179 degrees
! Estimated noise=0.525483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.084679 Jy
! Component: 100  -  total flux cleaned = 0.118761 Jy
! Total flux subtracted in 100 components = 0.118761 Jy
! Clean residual min=-0.008104 max=0.015231 Jy/beam
! Clean residual mean=-0.000005 rms=0.002673 Jy/beam
! Combined flux in latest and established models = 0.118761 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.118761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059927Jy  sigma=1.696125
! Fit after  self-cal, rms=0.059595Jy  sigma=1.686913
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172555 Jy
! Component: 100  -  total flux cleaned = 0.0269484 Jy
! Total flux subtracted in 100 components = 0.0269484 Jy
! Clean residual min=-0.004674 max=0.005736 Jy/beam
! Clean residual mean=-0.000003 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.14571 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.14571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052202Jy  sigma=1.441283
! Fit after  self-cal, rms=0.052158Jy  sigma=1.439709
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8816 mas, bmaj=2.01 mas, bpa=-2.274 degrees
! Estimated noise=0.303564 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00990195 Jy
! Component: 100  -  total flux cleaned = 0.0146334 Jy
! Component: 150  -  total flux cleaned = 0.0169892 Jy
! Component: 200  -  total flux cleaned = 0.0182252 Jy
! Total flux subtracted in 200 components = 0.0182252 Jy
! Clean residual min=-0.002321 max=0.003153 Jy/beam
! Clean residual mean=-0.000002 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.163935 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.163935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050535Jy  sigma=1.385821
! Fit after  self-cal, rms=0.050518Jy  sigma=1.385144
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8816 x 2.01 at -2.274 degrees (North through East)
! Clean map  min=-0.0021214  max=0.11963 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     MK        0.94     NL        0.95     OV        1.01     
!   PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.99     MK        1.07     NL        1.03     OV        1.07     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     MK        0.95     NL        0.99     OV        1.05     
!   PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.98     MK        1.08     NL        1.01     OV        1.03     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     MK        0.87     NL        1.02     OV        0.97     
!   PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.99     MK        0.97     NL        1.01     OV        1.03     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.02     MK        1.09     NL        1.01     OV        1.00     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     MK        0.94     NL        0.98     OV        1.02     
!   PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.97     MK        1.04     NL        1.01     OV        1.04     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     MK        1.04     NL        1.00     OV        1.02     
!   PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     MK        0.92     NL        0.94     OV        1.00     
!   PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.94     MK        1.03     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     MK        0.94     NL        1.00     OV        1.00     
!   PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.92     MK        1.04     NL        0.99     OV        1.08     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     MK        0.95     NL        1.03     OV        1.00     
!   PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.00     MK        1.12     NL        1.05     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     MK        1.16     NL        0.98     OV        0.99     
!   PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.98     MK        1.06     NL        0.99     OV        1.01     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     MK        1.03     NL        0.96     OV        1.16     
!   PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.96     MK        0.98     NL        0.98     OV        1.05     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     MK        0.87     NL        1.03     OV        1.00     
!   PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.94     MK        0.97     NL        1.03     OV        1.03     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.050518Jy  sigma=1.385144
! Fit after  self-cal, rms=0.050596Jy  sigma=1.374127
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8854 mas, bmaj=2.012 mas, bpa=-2.464 degrees
! Estimated noise=0.302865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183806 Jy
! Component: 100  -  total flux cleaned = 0.0017978 Jy
! Component: 150  -  total flux cleaned = 0.0017987 Jy
! Component: 200  -  total flux cleaned = 0.00185187 Jy
! Total flux subtracted in 200 components = 0.00185187 Jy
! Clean residual min=-0.001690 max=0.001494 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.165787 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.165787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050474Jy  sigma=1.371180
! Fit after  self-cal, rms=0.050463Jy  sigma=1.370798
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050463Jy  sigma=1.370798
! Fit after  self-cal, rms=0.050301Jy  sigma=1.369964
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8847 mas, bmaj=2.011 mas, bpa=-2.461 degrees
! Estimated noise=0.302014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000256626 Jy
! Component: 100  -  total flux cleaned = 0.000209912 Jy
! Component: 150  -  total flux cleaned = 0.000210355 Jy
! Component: 200  -  total flux cleaned = 0.000226902 Jy
! Total flux subtracted in 200 components = 0.000226902 Jy
! Clean residual min=-0.001492 max=0.001351 Jy/beam
! Clean residual mean=-0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.166014 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.166014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050280Jy  sigma=1.369487
! Fit after  self-cal, rms=0.050274Jy  sigma=1.369447
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.30236e-05 Jy
! Component: 100  -  total flux cleaned = -1.34308e-05 Jy
! Component: 150  -  total flux cleaned = -9.86303e-07 Jy
! Component: 200  -  total flux cleaned = 1.13419e-05 Jy
! Total flux subtracted in 200 components = 1.13419e-05 Jy
! Clean residual min=-0.001499 max=0.001361 Jy/beam
! Clean residual mean=-0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.166025 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.166025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050266Jy  sigma=1.369284
! Fit after  self-cal, rms=0.050263Jy  sigma=1.369276
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050263Jy  sigma=1.369276
! Fit after  self-cal, rms=0.050185Jy  sigma=1.369241
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8845 mas, bmaj=2.011 mas, bpa=-2.424 degrees
! Estimated noise=0.301664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.5805e-05 Jy
! Component: 100  -  total flux cleaned = -3.9025e-05 Jy
! Component: 150  -  total flux cleaned = -4.99559e-05 Jy
! Component: 200  -  total flux cleaned = -4.99947e-05 Jy
! Total flux subtracted in 200 components = -4.99947e-05 Jy
! Clean residual min=-0.001417 max=0.001327 Jy/beam
! Clean residual mean=-0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.165975 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 57 components and 0.165975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050180Jy  sigma=1.369128
! Fit after  self-cal, rms=0.050178Jy  sigma=1.369121
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.44059e-05 Jy
! Component: 100  -  total flux cleaned = 3.41921e-05 Jy
! Component: 150  -  total flux cleaned = 3.42048e-05 Jy
! Component: 200  -  total flux cleaned = 4.22358e-05 Jy
! Total flux subtracted in 200 components = 4.22358e-05 Jy
! Clean residual min=-0.001411 max=0.001327 Jy/beam
! Clean residual mean=-0.000000 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.166017 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 0.166017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050175Jy  sigma=1.369058
! Fit after  self-cal, rms=0.050174Jy  sigma=1.369055
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050174Jy  sigma=1.369055
! Fit after  self-cal, rms=0.050216Jy  sigma=1.369041
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.128 mas, bmaj=4.133 mas, bpa=-10.52 degrees
! Estimated noise=0.383768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163674 Jy
! Component: 100  -  total flux cleaned = -0.00017084 Jy
! Component: 150  -  total flux cleaned = -0.000176943 Jy
! Component: 200  -  total flux cleaned = -0.000171222 Jy
! Total flux subtracted in 200 components = -0.000171222 Jy
! Clean residual min=-0.000975 max=0.001012 Jy/beam
! Clean residual mean=-0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.165846 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.165846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050215Jy  sigma=1.369028
! Fit after  self-cal, rms=0.050214Jy  sigma=1.369013
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.5461e-05 Jy
! Component: 100  -  total flux cleaned = 1.62605e-05 Jy
! Component: 150  -  total flux cleaned = 1.64593e-05 Jy
! Component: 200  -  total flux cleaned = 1.65824e-05 Jy
! Total flux subtracted in 200 components = 1.65824e-05 Jy
! Clean residual min=-0.000959 max=0.000992 Jy/beam
! Clean residual mean=-0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.165863 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.165863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050213Jy  sigma=1.369005
! Fit after  self-cal, rms=0.050213Jy  sigma=1.368997
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8851 mas, bmaj=2.012 mas, bpa=-2.365 degrees
! Estimated noise=0.301724 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8851 x 2.012 at -2.365 degrees (North through East)
! Clean map  min=-0.0012316  max=0.11912 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7101 mas, bmaj=1.65 mas, bpa=-4.477 degrees
! Estimated noise=0.520285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0841446 Jy
! Component: 100  -  total flux cleaned = 0.118897 Jy
! Component: 150  -  total flux cleaned = 0.135949 Jy
! Component: 200  -  total flux cleaned = 0.145879 Jy
! Total flux subtracted in 200 components = 0.145879 Jy
! Clean residual min=-0.004318 max=0.005350 Jy/beam
! Clean residual mean=-0.000003 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.145879 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.145879 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8851 mas, bmaj=2.012 mas, bpa=-2.365 degrees
! Estimated noise=0.301724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00926096 Jy
! Component: 100  -  total flux cleaned = 0.013745 Jy
! Component: 150  -  total flux cleaned = 0.0160962 Jy
! Component: 200  -  total flux cleaned = 0.0172055 Jy
! Total flux subtracted in 200 components = 0.0172055 Jy
! Clean residual min=-0.001689 max=0.001418 Jy/beam
! Clean residual mean=-0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.163085 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.163085 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.128 mas, bmaj=4.133 mas, bpa=-10.52 degrees
! Estimated noise=0.383768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133712 Jy
! Component: 100  -  total flux cleaned = 0.00208889 Jy
! Component: 150  -  total flux cleaned = 0.00237937 Jy
! Component: 200  -  total flux cleaned = 0.00252134 Jy
! Total flux subtracted in 200 components = 0.00252134 Jy
! Clean residual min=-0.001117 max=0.001043 Jy/beam
! Clean residual mean=-0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.165606 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.35638e-05 Jy
! Component: 100  -  total flux cleaned = 7.67363e-05 Jy
! Component: 150  -  total flux cleaned = 9.72209e-05 Jy
! Component: 200  -  total flux cleaned = 0.000124189 Jy
! Total flux subtracted in 200 components = 0.000124189 Jy
! Clean residual min=-0.001076 max=0.001021 Jy/beam
! Clean residual mean=-0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.16573 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 39 components and 0.16573 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8851 mas, bmaj=2.012 mas, bpa=-2.365 degrees
! Estimated noise=0.301724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00058342 Jy
! Component: 100  -  total flux cleaned = -0.000556951 Jy
! Component: 150  -  total flux cleaned = -0.000471756 Jy
! Component: 200  -  total flux cleaned = -0.00039776 Jy
! Total flux subtracted in 200 components = -0.00039776 Jy
! Clean residual min=-0.001553 max=0.001316 Jy/beam
! Clean residual mean=-0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.165332 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.165332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050228Jy  sigma=1.369378
! Fit after  self-cal, rms=0.050230Jy  sigma=1.369344
wmodel /J0650+0358_X_map.mod
! wmodel: Unable to open new model file: /J0650+0358_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0650+0358_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8851 x 2.012 at -2.365 degrees (North through East)
! Clean map  min=-0.001359  max=0.11842 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0650+0358_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.118423 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000310271 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.786006 0.786006 1.57201 3.14402 6.28805 12.5761 25.1522 50.3044
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.118 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  381.676 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0650+0358_X_dfm.log closed on Thu May 19 23:55:49 2016