! Started logfile: /scr/pima/bg219a_uvs/J0650+0358_S_uvs.log on Wed Apr 6 22:47:08 2016 obs /scr/pima/bg219a_uvs/J0650+0358_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0650+0358_S_uva.fits ! AN table 1: 23 integrations on 10 of 10 possible baselines. ! AN table 2: 24 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.964407 visibilities/baseline/integration-bin. ! Found source: J0650+0358 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2276 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0650+0358_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.028643Jy sigma=26.879043 ! Fit after self-cal, rms=0.843152Jy sigma=21.820296 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=6.932 mas, bpa=-6.767 degrees ! Estimated noise=0.701521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119953 Jy ! Component: 100 - total flux cleaned = 0.147144 Jy ! Total flux subtracted in 100 components = 0.147144 Jy ! Clean residual min=-0.007726 max=0.010342 Jy/beam ! Clean residual mean=0.000013 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.147144 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.147144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054809Jy sigma=1.350161 ! Fit after self-cal, rms=0.054813Jy sigma=1.350051 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.83 mas, bpa=-5.515 degrees ! Estimated noise=0.585666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156471 Jy ! Component: 100 - total flux cleaned = 0.0227977 Jy ! Component: 150 - total flux cleaned = 0.0263925 Jy ! Component: 200 - total flux cleaned = 0.0284037 Jy ! Total flux subtracted in 200 components = 0.0284037 Jy ! Clean residual min=-0.003243 max=0.003356 Jy/beam ! Clean residual mean=-0.000002 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.175547 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.175547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050766Jy sigma=1.235552 ! Fit after self-cal, rms=0.050785Jy sigma=1.234989 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.32 x 7.83 at -5.515 degrees (North through East) ! Clean map min=-0.0031223 max=0.15821 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 MK 1.08 NL 0.98 OV 1.01 ! PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.03 MK 1.07 NL 1.03 OV 1.03 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 MK 1.01 NL 0.98 OV 0.99 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.99 MK 1.03 NL 1.02 OV 1.00 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 MK 0.96 NL 1.00 OV 1.03 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.96 MK 0.99 NL 0.98 OV 1.02 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 MK 0.99 NL 0.96 OV 0.97 ! PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.99 MK 1.02 NL 0.98 OV 0.98 ! PT 0.95 SC 0.95 ! ! ! Fit before self-cal, rms=0.050785Jy sigma=1.234989 ! Fit after self-cal, rms=0.050347Jy sigma=1.219759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.849 mas, bpa=-5.563 degrees ! Estimated noise=0.584358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129739 Jy ! Component: 100 - total flux cleaned = -8.09715e-05 Jy ! Component: 150 - total flux cleaned = -8.0333e-05 Jy ! Component: 200 - total flux cleaned = -6.63848e-05 Jy ! Total flux subtracted in 200 components = -6.63848e-05 Jy ! Clean residual min=-0.002669 max=0.003259 Jy/beam ! Clean residual mean=-0.000003 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.175481 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.175481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050333Jy sigma=1.219568 ! Fit after self-cal, rms=0.050340Jy sigma=1.219492 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050340Jy sigma=1.219492 ! Fit after self-cal, rms=0.050417Jy sigma=1.219466 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=7.85 mas, bpa=-5.531 degrees ! Estimated noise=0.585044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.29553e-05 Jy ! Component: 100 - total flux cleaned = -9.08351e-06 Jy ! Component: 150 - total flux cleaned = -9.43232e-06 Jy ! Component: 200 - total flux cleaned = -2.19406e-05 Jy ! Total flux subtracted in 200 components = -2.19406e-05 Jy ! Clean residual min=-0.002650 max=0.003238 Jy/beam ! Clean residual mean=-0.000003 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.175459 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.175459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050408Jy sigma=1.219343 ! Fit after self-cal, rms=0.050408Jy sigma=1.219340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232922 Jy ! Component: 100 - total flux cleaned = 0.00273531 Jy ! Component: 150 - total flux cleaned = 0.00309926 Jy ! Component: 200 - total flux cleaned = 0.00347354 Jy ! Total flux subtracted in 200 components = 0.00347354 Jy ! Clean residual min=-0.002191 max=0.001998 Jy/beam ! Clean residual mean=-0.000002 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.178933 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 76 components and 0.178933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050257Jy sigma=1.215432 ! Fit after self-cal, rms=0.050248Jy sigma=1.215211 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050248Jy sigma=1.215211 ! Fit after self-cal, rms=0.050187Jy sigma=1.215000 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=7.855 mas, bpa=-5.532 degrees ! Estimated noise=0.583904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027024 Jy ! Component: 100 - total flux cleaned = 0.000489116 Jy ! Component: 150 - total flux cleaned = 0.000682668 Jy ! Component: 200 - total flux cleaned = 0.000860335 Jy ! Total flux subtracted in 200 components = 0.000860335 Jy ! Clean residual min=-0.002000 max=0.001960 Jy/beam ! Clean residual mean=-0.000002 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.179793 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.179793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050157Jy sigma=1.214292 ! Fit after self-cal, rms=0.050158Jy sigma=1.214264 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109106 Jy ! Component: 100 - total flux cleaned = 0.000190028 Jy ! Component: 150 - total flux cleaned = 0.000247748 Jy ! Component: 200 - total flux cleaned = 0.000319306 Jy ! Total flux subtracted in 200 components = 0.000319306 Jy ! Clean residual min=-0.001944 max=0.001940 Jy/beam ! Clean residual mean=-0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.180112 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.180112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050144Jy sigma=1.213920 ! Fit after self-cal, rms=0.050143Jy sigma=1.213911 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050143Jy sigma=1.213911 ! Fit after self-cal, rms=0.050139Jy sigma=1.213809 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=15.18 mas, bpa=-12.03 degrees ! Estimated noise=0.726479 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193949 Jy ! Component: 100 - total flux cleaned = -0.000235494 Jy ! Component: 150 - total flux cleaned = -0.000218602 Jy ! Component: 200 - total flux cleaned = -0.000169391 Jy ! Total flux subtracted in 200 components = -0.000169391 Jy ! Clean residual min=-0.001733 max=0.001907 Jy/beam ! Clean residual mean=-0.000004 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.179943 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 112 components and 0.179943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050131Jy sigma=1.213690 ! Fit after self-cal, rms=0.050133Jy sigma=1.213679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.52713e-05 Jy ! Component: 100 - total flux cleaned = 8.20948e-05 Jy ! Component: 150 - total flux cleaned = 0.000108411 Jy ! Component: 200 - total flux cleaned = 0.000120992 Jy ! Total flux subtracted in 200 components = 0.000120992 Jy ! Clean residual min=-0.001697 max=0.001837 Jy/beam ! Clean residual mean=-0.000004 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.180064 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 117 components and 0.180064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050131Jy sigma=1.213692 ! Fit after self-cal, rms=0.050132Jy sigma=1.213686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.856 mas, bpa=-5.527 degrees ! Estimated noise=0.583599 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.344 x 7.856 at -5.527 degrees (North through East) ! Clean map min=-0.0022058 max=0.15747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=6.939 mas, bpa=-6.829 degrees ! Estimated noise=0.697783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119216 Jy ! Component: 100 - total flux cleaned = 0.14609 Jy ! Component: 150 - total flux cleaned = 0.157606 Jy ! Component: 200 - total flux cleaned = 0.164156 Jy ! Total flux subtracted in 200 components = 0.164156 Jy ! Clean residual min=-0.004315 max=0.003706 Jy/beam ! Clean residual mean=0.000003 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.164156 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.164156 Jy ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.856 mas, bpa=-5.527 degrees ! Estimated noise=0.583599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523575 Jy ! Component: 100 - total flux cleaned = 0.00759113 Jy ! Component: 150 - total flux cleaned = 0.00912216 Jy ! Component: 200 - total flux cleaned = 0.0103711 Jy ! Total flux subtracted in 200 components = 0.0103711 Jy ! Clean residual min=-0.002729 max=0.002312 Jy/beam ! Clean residual mean=-0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.174527 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.174527 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=15.18 mas, bpa=-12.03 degrees ! Estimated noise=0.726479 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177917 Jy ! Component: 100 - total flux cleaned = 0.00290874 Jy ! Component: 150 - total flux cleaned = 0.00374056 Jy ! Component: 200 - total flux cleaned = 0.00406811 Jy ! Total flux subtracted in 200 components = 0.00406811 Jy ! Clean residual min=-0.001952 max=0.001953 Jy/beam ! Clean residual mean=-0.000005 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.178596 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264195 Jy ! Component: 100 - total flux cleaned = 0.000537231 Jy ! Component: 150 - total flux cleaned = 0.000757342 Jy ! Component: 200 - total flux cleaned = 0.00093589 Jy ! Total flux subtracted in 200 components = 0.00093589 Jy ! Clean residual min=-0.001788 max=0.001860 Jy/beam ! Clean residual mean=-0.000005 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.179531 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 62 components and 0.179531 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.856 mas, bpa=-5.527 degrees ! Estimated noise=0.583599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414878 Jy ! Component: 100 - total flux cleaned = 0.000446722 Jy ! Component: 150 - total flux cleaned = 0.000476564 Jy ! Component: 200 - total flux cleaned = 0.000587968 Jy ! Total flux subtracted in 200 components = 0.000587968 Jy ! Clean residual min=-0.001980 max=0.001921 Jy/beam ! Clean residual mean=-0.000002 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.180119 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.180119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050167Jy sigma=1.214452 ! Fit after self-cal, rms=0.050167Jy sigma=1.214417 wmodel /scr/pima/bg219a_uvs/J0650+0358_S_map.mod ! Writing 81 model components to file: /scr/pima/bg219a_uvs/J0650+0358_S_map.mod wobs /scr/pima/bg219a_uvs/J0650+0358_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J0650+0358_S_uvs.fits wwins /scr/pima/bg219a_uvs/J0650+0358_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219a_uvs/J0650+0358_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.24144e-06 Jy ! Component: 100 - total flux cleaned = -0.000259045 Jy ! Component: 150 - total flux cleaned = -0.00034803 Jy ! Component: 200 - total flux cleaned = -0.000374867 Jy ! Component: 250 - total flux cleaned = -0.000321937 Jy ! Component: 300 - total flux cleaned = -0.000396179 Jy ! Component: 350 - total flux cleaned = -0.000419867 Jy ! Component: 400 - total flux cleaned = -0.000490054 Jy ! Component: 450 - total flux cleaned = -0.000556895 Jy ! Component: 500 - total flux cleaned = -0.000556844 Jy ! Component: 550 - total flux cleaned = -0.00055708 Jy ! Component: 600 - total flux cleaned = -0.000618932 Jy ! Component: 650 - total flux cleaned = -0.000558218 Jy ! Component: 700 - total flux cleaned = -0.000519215 Jy ! Component: 750 - total flux cleaned = -0.000538446 Jy ! Component: 800 - total flux cleaned = -0.000519421 Jy ! Component: 850 - total flux cleaned = -0.000519476 Jy ! Component: 900 - total flux cleaned = -0.000556134 Jy ! Component: 950 - total flux cleaned = -0.00059183 Jy ! Component: 1000 - total flux cleaned = -0.000556338 Jy ! Component: 1050 - total flux cleaned = -0.000556262 Jy ! Component: 1100 - total flux cleaned = -0.000573229 Jy ! Component: 1150 - total flux cleaned = -0.000556282 Jy ! Component: 1200 - total flux cleaned = -0.000572737 Jy ! Component: 1250 - total flux cleaned = -0.000539854 Jy ! Component: 1300 - total flux cleaned = -0.000539949 Jy ! Component: 1350 - total flux cleaned = -0.000524291 Jy ! Component: 1400 - total flux cleaned = -0.000540031 Jy ! Component: 1450 - total flux cleaned = -0.000539946 Jy ! Component: 1500 - total flux cleaned = -0.000540037 Jy ! Component: 1550 - total flux cleaned = -0.000540157 Jy ! Component: 1600 - total flux cleaned = -0.000569977 Jy ! Component: 1650 - total flux cleaned = -0.000599319 Jy ! Component: 1700 - total flux cleaned = -0.000628438 Jy ! Component: 1750 - total flux cleaned = -0.000671612 Jy ! Component: 1800 - total flux cleaned = -0.000685768 Jy ! Component: 1850 - total flux cleaned = -0.000727946 Jy ! Component: 1900 - total flux cleaned = -0.000727987 Jy ! Component: 1950 - total flux cleaned = -0.000797156 Jy ! Component: 2000 - total flux cleaned = -0.000824413 Jy ! Component: 2050 - total flux cleaned = -0.000865024 Jy ! Component: 2100 - total flux cleaned = -0.000878385 Jy ! Component: 2150 - total flux cleaned = -0.000918438 Jy ! Component: 2200 - total flux cleaned = -0.000984606 Jy ! Component: 2250 - total flux cleaned = -0.000997807 Jy ! Component: 2300 - total flux cleaned = -0.00106299 Jy ! Component: 2350 - total flux cleaned = -0.00107599 Jy ! Component: 2400 - total flux cleaned = -0.00114039 Jy ! Component: 2450 - total flux cleaned = -0.00116589 Jy ! Component: 2500 - total flux cleaned = -0.00120396 Jy ! Component: 2550 - total flux cleaned = -0.00126724 Jy ! Component: 2600 - total flux cleaned = -0.00127979 Jy ! Component: 2650 - total flux cleaned = -0.00134247 Jy ! Component: 2700 - total flux cleaned = -0.00137989 Jy ! Component: 2750 - total flux cleaned = -0.00140481 Jy ! Component: 2800 - total flux cleaned = -0.00146686 Jy ! Component: 2850 - total flux cleaned = -0.00150399 Jy ! Component: 2900 - total flux cleaned = -0.0015533 Jy ! Component: 2950 - total flux cleaned = -0.00157787 Jy ! Component: 3000 - total flux cleaned = -0.0016023 Jy ! Component: 3050 - total flux cleaned = -0.00165123 Jy ! Component: 3100 - total flux cleaned = -0.00168782 Jy ! Component: 3150 - total flux cleaned = -0.00171216 Jy ! Component: 3200 - total flux cleaned = -0.00173647 Jy ! Component: 3250 - total flux cleaned = -0.00179717 Jy ! Component: 3300 - total flux cleaned = -0.00180929 Jy ! Component: 3350 - total flux cleaned = -0.00184556 Jy ! Component: 3400 - total flux cleaned = -0.0018697 Jy ! Component: 3450 - total flux cleaned = -0.00188177 Jy ! Component: 3500 - total flux cleaned = -0.00192997 Jy ! Component: 3550 - total flux cleaned = -0.00197812 Jy ! Component: 3600 - total flux cleaned = -0.00197809 Jy ! Component: 3650 - total flux cleaned = -0.00200217 Jy ! Component: 3700 - total flux cleaned = -0.00203809 Jy ! Component: 3750 - total flux cleaned = -0.00207404 Jy ! Component: 3800 - total flux cleaned = -0.00208598 Jy ! Component: 3850 - total flux cleaned = -0.00210993 Jy ! Component: 3900 - total flux cleaned = -0.00210996 Jy ! Component: 3950 - total flux cleaned = -0.00212192 Jy ! Component: 4000 - total flux cleaned = -0.00213394 Jy ! Component: 4050 - total flux cleaned = -0.00216988 Jy ! Total flux subtracted in 4096 components = -0.00219395 Jy ! Clean residual min=-0.000746 max=0.000737 Jy/beam ! Clean residual mean=-0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.177926 Jy keep ! Adding 200 model components to the UV plane model. ! The established model now contains 281 components and 0.177925 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J0650+0358_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.344 x 7.856 at -5.527 degrees (North through East) ! Clean map min=-0.0015285 max=0.15691 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0650+0358_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156912 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000186162 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.355923 0.355923 0.711846 1.42369 2.84738 5.69477 11.3895 22.7791 45.5581 91.1163 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.156 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 842.879 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0650+0358_S_uvs.log closed on Wed Apr 6 22:47:13 2016