! Started logfile: /scr/pima/bg219a_uvs/J0650+0358_S_dfm.log on Thu May 19 23:55:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0650+0358_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0650+0358_S_uva.fits
! AN table 1: 23 integrations on 10 of 10 possible baselines.
! AN table 2: 24 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.964407 visibilities/baseline/integration-bin.
! Found source: J0650+0358
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2276 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0650+0358_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028643Jy  sigma=26.879043
! Fit after  self-cal, rms=0.843152Jy  sigma=21.820296
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.705 mas, bmaj=6.932 mas, bpa=-6.767 degrees
! Estimated noise=0.701521 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119953 Jy
! Component: 100  -  total flux cleaned = 0.147144 Jy
! Total flux subtracted in 100 components = 0.147144 Jy
! Clean residual min=-0.007726 max=0.010342 Jy/beam
! Clean residual mean=0.000013 rms=0.002056 Jy/beam
! Combined flux in latest and established models = 0.147144 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.147144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054809Jy  sigma=1.350161
! Fit after  self-cal, rms=0.054813Jy  sigma=1.350051
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.32 mas, bmaj=7.83 mas, bpa=-5.515 degrees
! Estimated noise=0.585666 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156471 Jy
! Component: 100  -  total flux cleaned = 0.0227977 Jy
! Component: 150  -  total flux cleaned = 0.0263925 Jy
! Component: 200  -  total flux cleaned = 0.0284037 Jy
! Total flux subtracted in 200 components = 0.0284037 Jy
! Clean residual min=-0.003243 max=0.003356 Jy/beam
! Clean residual mean=-0.000002 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.175547 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 43 components and 0.175547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050766Jy  sigma=1.235552
! Fit after  self-cal, rms=0.050785Jy  sigma=1.234989
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.32 x 7.83 at -5.515 degrees (North through East)
! Clean map  min=-0.0031223  max=0.15821 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     MK        1.08     NL        0.98     OV        1.01     
!   PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.03     MK        1.07     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     MK        1.01     NL        0.98     OV        0.99     
!   PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.99     MK        1.03     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     MK        0.96     NL        1.00     OV        1.03     
!   PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.96     MK        0.99     NL        0.98     OV        1.02     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     MK        0.99     NL        0.96     OV        0.97     
!   PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.99     MK        1.02     NL        0.98     OV        0.98     
!   PT        0.95     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.050785Jy  sigma=1.234989
! Fit after  self-cal, rms=0.050347Jy  sigma=1.219759
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.336 mas, bmaj=7.849 mas, bpa=-5.563 degrees
! Estimated noise=0.584358 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129739 Jy
! Component: 100  -  total flux cleaned = -8.09715e-05 Jy
! Component: 150  -  total flux cleaned = -8.0333e-05 Jy
! Component: 200  -  total flux cleaned = -6.63848e-05 Jy
! Total flux subtracted in 200 components = -6.63848e-05 Jy
! Clean residual min=-0.002669 max=0.003259 Jy/beam
! Clean residual mean=-0.000003 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.175481 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.175481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050333Jy  sigma=1.219568
! Fit after  self-cal, rms=0.050340Jy  sigma=1.219492
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050340Jy  sigma=1.219492
! Fit after  self-cal, rms=0.050417Jy  sigma=1.219466
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.338 mas, bmaj=7.85 mas, bpa=-5.531 degrees
! Estimated noise=0.585044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.29553e-05 Jy
! Component: 100  -  total flux cleaned = -9.08351e-06 Jy
! Component: 150  -  total flux cleaned = -9.43232e-06 Jy
! Component: 200  -  total flux cleaned = -2.19406e-05 Jy
! Total flux subtracted in 200 components = -2.19406e-05 Jy
! Clean residual min=-0.002650 max=0.003238 Jy/beam
! Clean residual mean=-0.000003 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.175459 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 0.175459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050408Jy  sigma=1.219343
! Fit after  self-cal, rms=0.050408Jy  sigma=1.219340
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-52.5, -27.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232922 Jy
! Component: 100  -  total flux cleaned = 0.00273531 Jy
! Component: 150  -  total flux cleaned = 0.00309926 Jy
! Component: 200  -  total flux cleaned = 0.00347354 Jy
! Total flux subtracted in 200 components = 0.00347354 Jy
! Clean residual min=-0.002191 max=0.001998 Jy/beam
! Clean residual mean=-0.000002 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.178933 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 76 components and 0.178933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050257Jy  sigma=1.215432
! Fit after  self-cal, rms=0.050248Jy  sigma=1.215211
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050248Jy  sigma=1.215211
! Fit after  self-cal, rms=0.050187Jy  sigma=1.215000
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.342 mas, bmaj=7.855 mas, bpa=-5.532 degrees
! Estimated noise=0.583904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027024 Jy
! Component: 100  -  total flux cleaned = 0.000489116 Jy
! Component: 150  -  total flux cleaned = 0.000682668 Jy
! Component: 200  -  total flux cleaned = 0.000860335 Jy
! Total flux subtracted in 200 components = 0.000860335 Jy
! Clean residual min=-0.002000 max=0.001960 Jy/beam
! Clean residual mean=-0.000002 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.179793 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.179793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050157Jy  sigma=1.214292
! Fit after  self-cal, rms=0.050158Jy  sigma=1.214264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109106 Jy
! Component: 100  -  total flux cleaned = 0.000190028 Jy
! Component: 150  -  total flux cleaned = 0.000247748 Jy
! Component: 200  -  total flux cleaned = 0.000319306 Jy
! Total flux subtracted in 200 components = 0.000319306 Jy
! Clean residual min=-0.001944 max=0.001940 Jy/beam
! Clean residual mean=-0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.180112 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.180112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050144Jy  sigma=1.213920
! Fit after  self-cal, rms=0.050143Jy  sigma=1.213911
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050143Jy  sigma=1.213911
! Fit after  self-cal, rms=0.050139Jy  sigma=1.213809
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=15.18 mas, bpa=-12.03 degrees
! Estimated noise=0.726479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000193949 Jy
! Component: 100  -  total flux cleaned = -0.000235494 Jy
! Component: 150  -  total flux cleaned = -0.000218602 Jy
! Component: 200  -  total flux cleaned = -0.000169391 Jy
! Total flux subtracted in 200 components = -0.000169391 Jy
! Clean residual min=-0.001733 max=0.001907 Jy/beam
! Clean residual mean=-0.000004 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.179943 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 112 components and 0.179943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050131Jy  sigma=1.213690
! Fit after  self-cal, rms=0.050133Jy  sigma=1.213679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.52713e-05 Jy
! Component: 100  -  total flux cleaned = 8.20948e-05 Jy
! Component: 150  -  total flux cleaned = 0.000108411 Jy
! Component: 200  -  total flux cleaned = 0.000120992 Jy
! Total flux subtracted in 200 components = 0.000120992 Jy
! Clean residual min=-0.001697 max=0.001837 Jy/beam
! Clean residual mean=-0.000004 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.180064 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 117 components and 0.180064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050131Jy  sigma=1.213692
! Fit after  self-cal, rms=0.050132Jy  sigma=1.213686
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.344 mas, bmaj=7.856 mas, bpa=-5.527 degrees
! Estimated noise=0.583599 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.344 x 7.856 at -5.527 degrees (North through East)
! Clean map  min=-0.0022058  max=0.15747 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.714 mas, bmaj=6.939 mas, bpa=-6.829 degrees
! Estimated noise=0.697783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119216 Jy
! Component: 100  -  total flux cleaned = 0.14609 Jy
! Component: 150  -  total flux cleaned = 0.157606 Jy
! Component: 200  -  total flux cleaned = 0.164156 Jy
! Total flux subtracted in 200 components = 0.164156 Jy
! Clean residual min=-0.004315 max=0.003706 Jy/beam
! Clean residual mean=0.000003 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.164156 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.164156 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.344 mas, bmaj=7.856 mas, bpa=-5.527 degrees
! Estimated noise=0.583599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00523575 Jy
! Component: 100  -  total flux cleaned = 0.00759113 Jy
! Component: 150  -  total flux cleaned = 0.00912216 Jy
! Component: 200  -  total flux cleaned = 0.0103711 Jy
! Total flux subtracted in 200 components = 0.0103711 Jy
! Clean residual min=-0.002729 max=0.002312 Jy/beam
! Clean residual mean=-0.000001 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.174527 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 33 components and 0.174527 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=15.18 mas, bpa=-12.03 degrees
! Estimated noise=0.726479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177917 Jy
! Component: 100  -  total flux cleaned = 0.00290874 Jy
! Component: 150  -  total flux cleaned = 0.00374056 Jy
! Component: 200  -  total flux cleaned = 0.00406811 Jy
! Total flux subtracted in 200 components = 0.00406811 Jy
! Clean residual min=-0.001952 max=0.001953 Jy/beam
! Clean residual mean=-0.000005 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.178596 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264195 Jy
! Component: 100  -  total flux cleaned = 0.000537231 Jy
! Component: 150  -  total flux cleaned = 0.000757342 Jy
! Component: 200  -  total flux cleaned = 0.00093589 Jy
! Total flux subtracted in 200 components = 0.00093589 Jy
! Clean residual min=-0.001788 max=0.001860 Jy/beam
! Clean residual mean=-0.000005 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.179531 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 62 components and 0.179531 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.344 mas, bmaj=7.856 mas, bpa=-5.527 degrees
! Estimated noise=0.583599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414878 Jy
! Component: 100  -  total flux cleaned = 0.000446722 Jy
! Component: 150  -  total flux cleaned = 0.000476564 Jy
! Component: 200  -  total flux cleaned = 0.000587968 Jy
! Total flux subtracted in 200 components = 0.000587968 Jy
! Clean residual min=-0.001980 max=0.001921 Jy/beam
! Clean residual mean=-0.000002 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.180119 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 0.180119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050167Jy  sigma=1.214452
! Fit after  self-cal, rms=0.050167Jy  sigma=1.214417
wmodel /J0650+0358_S_map.mod
! wmodel: Unable to open new model file: /J0650+0358_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0650+0358_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.344 x 7.856 at -5.527 degrees (North through East)
! Clean map  min=-0.0020229  max=0.15686 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0650+0358_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.156861 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000503365 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.962698 0.962698 1.9254 3.85079 7.70159 15.4032 30.8063 61.6127
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.156 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  311.624 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0650+0358_S_dfm.log closed on Thu May 19 23:55:46 2016