! Started logfile: /scr/pima/bg219a_uvs/J0648-3044_X_dfm.log on Thu May 19 23:55:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0648-3044_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0648-3044_X_uva.fits
! AN table 1: 39 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.813675 visibilities/baseline/integration-bin.
! Found source: J0648-3044
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5712 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0648-3044_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.384301Jy  sigma=26.177049
! Fit after  self-cal, rms=0.218572Jy  sigma=3.947701
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5489 mas, bmaj=1.65 mas, bpa=-5.731 degrees
! Estimated noise=1.22669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.701086 Jy
! Component: 100  -  total flux cleaned = 0.854112 Jy
! Total flux subtracted in 100 components = 0.854112 Jy
! Clean residual min=-0.040667 max=0.050646 Jy/beam
! Clean residual mean=-0.000055 rms=0.007773 Jy/beam
! Combined flux in latest and established models = 0.854112 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.854112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.227464Jy  sigma=4.214705
! Fit after  self-cal, rms=0.227464Jy  sigma=4.214578
! Inverting map 
! Added new window around map position (-8.8, 14.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0498476 Jy
! Component: 100  -  total flux cleaned = 0.0770638 Jy
! Total flux subtracted in 100 components = 0.0770638 Jy
! Clean residual min=-0.031656 max=0.030013 Jy/beam
! Clean residual mean=-0.000039 rms=0.005550 Jy/beam
! Combined flux in latest and established models = 0.931176 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.931176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.209162Jy  sigma=3.842457
! Fit after  self-cal, rms=0.208796Jy  sigma=3.835814
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7599 mas, bmaj=2.028 mas, bpa=-5.696 degrees
! Estimated noise=0.548755 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345061 Jy
! Component: 100  -  total flux cleaned = 0.0506013 Jy
! Component: 150  -  total flux cleaned = 0.0595851 Jy
! Component: 200  -  total flux cleaned = 0.0645118 Jy
! Total flux subtracted in 200 components = 0.0645118 Jy
! Clean residual min=-0.022581 max=0.034905 Jy/beam
! Clean residual mean=-0.000162 rms=0.008982 Jy/beam
! Combined flux in latest and established models = 0.995688 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 26 components and 0.995688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.203482Jy  sigma=3.725384
! Fit after  self-cal, rms=0.203395Jy  sigma=3.723767
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7599 x 2.028 at -5.696 degrees (North through East)
! Clean map  min=-0.021677  max=0.91044 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.05     OV        1.06     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.01     NL        1.03     OV        1.04     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.04     OV        1.05     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        1.04     OV        1.04     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.03     OV        1.04     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.03     NL        1.04     OV        1.04     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.02     OV        1.02     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.03     OV        1.04     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.04     OV        1.04     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        1.02     OV        1.04     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.01     OV        1.05     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.02     OV        1.04     
!   PT        0.94     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.203395Jy  sigma=3.723767
! Fit after  self-cal, rms=0.201577Jy  sigma=3.639893
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.761 mas, bmaj=2.029 mas, bpa=-5.624 degrees
! Estimated noise=0.547801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00325419 Jy
! Component: 100  -  total flux cleaned = -0.00388203 Jy
! Component: 150  -  total flux cleaned = -0.00438665 Jy
! Component: 200  -  total flux cleaned = -0.00463784 Jy
! Total flux subtracted in 200 components = -0.00463784 Jy
! Clean residual min=-0.015784 max=0.023772 Jy/beam
! Clean residual mean=-0.000074 rms=0.005381 Jy/beam
! Combined flux in latest and established models = 0.99105 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 37 components and 0.99105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.201378Jy  sigma=3.638826
! Fit after  self-cal, rms=0.201352Jy  sigma=3.638605
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.201352Jy  sigma=3.638605
! Fit after  self-cal, rms=0.200931Jy  sigma=3.638041
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7616 mas, bmaj=2.03 mas, bpa=-5.557 degrees
! Estimated noise=0.546419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00304921 Jy
! Component: 100  -  total flux cleaned = -0.00356468 Jy
! Component: 150  -  total flux cleaned = -0.00397761 Jy
! Component: 200  -  total flux cleaned = -0.00412063 Jy
! Total flux subtracted in 200 components = -0.00412063 Jy
! Clean residual min=-0.015534 max=0.023587 Jy/beam
! Clean residual mean=-0.000075 rms=0.005336 Jy/beam
! Combined flux in latest and established models = 0.986929 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 41 components and 0.986929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.200777Jy  sigma=3.637585
! Fit after  self-cal, rms=0.200764Jy  sigma=3.637469
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220131 Jy
! Component: 100  -  total flux cleaned = 0.0331039 Jy
! Component: 150  -  total flux cleaned = 0.0407825 Jy
! Component: 200  -  total flux cleaned = 0.0468258 Jy
! Total flux subtracted in 200 components = 0.0468258 Jy
! Clean residual min=-0.009370 max=0.011819 Jy/beam
! Clean residual mean=-0.000028 rms=0.002785 Jy/beam
! Combined flux in latest and established models = 1.03376 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 71 components and 1.03376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.198085Jy  sigma=3.595289
! Fit after  self-cal, rms=0.197983Jy  sigma=3.593412
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.197983Jy  sigma=3.593412
! Fit after  self-cal, rms=0.196591Jy  sigma=3.569113
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7646 mas, bmaj=2.035 mas, bpa=-5.546 degrees
! Estimated noise=0.543879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00329436 Jy
! Component: 100  -  total flux cleaned = 0.00474209 Jy
! Component: 150  -  total flux cleaned = 0.00590468 Jy
! Component: 200  -  total flux cleaned = 0.00682857 Jy
! Total flux subtracted in 200 components = 0.00682857 Jy
! Clean residual min=-0.006850 max=0.005212 Jy/beam
! Clean residual mean=-0.000004 rms=0.001655 Jy/beam
! Combined flux in latest and established models = 1.04058 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 97 components and 1.04058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.196241Jy  sigma=3.565566
! Fit after  self-cal, rms=0.196222Jy  sigma=3.565109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000390609 Jy
! Component: 100  -  total flux cleaned = 0.0013499 Jy
! Component: 150  -  total flux cleaned = 0.00221836 Jy
! Component: 200  -  total flux cleaned = 0.00307939 Jy
! Total flux subtracted in 200 components = 0.00307939 Jy
! Clean residual min=-0.006177 max=0.004618 Jy/beam
! Clean residual mean=-0.000002 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 1.04366 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 100 components and 1.04366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.196131Jy  sigma=3.564387
! Fit after  self-cal, rms=0.196126Jy  sigma=3.564285
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.196126Jy  sigma=3.564285
! Fit after  self-cal, rms=0.195492Jy  sigma=3.562860
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.931 mas, bmaj=6.892 mas, bpa=-5.181 degrees
! Estimated noise=0.732591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108436 Jy
! Component: 100  -  total flux cleaned = -0.000396274 Jy
! Component: 150  -  total flux cleaned = 0.000221958 Jy
! Component: 200  -  total flux cleaned = 0.000686181 Jy
! Total flux subtracted in 200 components = 0.000686181 Jy
! Clean residual min=-0.007575 max=0.006686 Jy/beam
! Clean residual mean=-0.000001 rms=0.002186 Jy/beam
! Combined flux in latest and established models = 1.04435 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 105 components and 1.04435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.195389Jy  sigma=3.563103
! Fit after  self-cal, rms=0.195358Jy  sigma=3.562424
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000260574 Jy
! Component: 100  -  total flux cleaned = 0.000929323 Jy
! Component: 150  -  total flux cleaned = 0.00143935 Jy
! Component: 200  -  total flux cleaned = 0.00183109 Jy
! Total flux subtracted in 200 components = 0.00183109 Jy
! Clean residual min=-0.006522 max=0.006385 Jy/beam
! Clean residual mean=0.000001 rms=0.002021 Jy/beam
! Combined flux in latest and established models = 1.04618 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 109 components and 1.04618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.195351Jy  sigma=3.562789
! Fit after  self-cal, rms=0.195347Jy  sigma=3.562688
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7654 mas, bmaj=2.037 mas, bpa=-5.526 degrees
! Estimated noise=0.542111 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7654 x 2.037 at -5.526 degrees (North through East)
! Clean map  min=-0.01082  max=0.91129 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.195347Jy  sigma=3.562688
! Fit after  self-cal, rms=0.180266Jy  sigma=3.281212
! Inverting map and beam 
! Estimated beam: bmin=0.7678 mas, bmaj=2.042 mas, bpa=-5.343 degrees
! Estimated noise=0.513023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0383498 Jy
! Component: 100  -  total flux cleaned = -0.0337095 Jy
! Component: 150  -  total flux cleaned = -0.0318226 Jy
! Component: 200  -  total flux cleaned = -0.0323731 Jy
! Total flux subtracted in 200 components = -0.0323731 Jy
! Clean residual min=-0.009559 max=0.014033 Jy/beam
! Clean residual mean=-0.000009 rms=0.002324 Jy/beam
! Combined flux in latest and established models = 1.01381 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 117 components and 1.01381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.170255Jy  sigma=3.135142
! Fit after  self-cal, rms=0.170200Jy  sigma=3.133540
! Inverting map 
! Added new window around map position (4.2, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108303 Jy
! Component: 100  -  total flux cleaned = 0.0123201 Jy
! Component: 150  -  total flux cleaned = 0.012323 Jy
! Component: 200  -  total flux cleaned = 0.0123267 Jy
! Total flux subtracted in 200 components = 0.0123267 Jy
! Clean residual min=-0.006683 max=0.006998 Jy/beam
! Clean residual mean=-0.000006 rms=0.001445 Jy/beam
! Combined flux in latest and established models = 1.02613 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 122 components and 1.02613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.169011Jy  sigma=3.123917
! Fit after  self-cal, rms=0.168983Jy  sigma=3.123140
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.168983Jy  sigma=3.123140
! Fit after  self-cal, rms=0.161551Jy  sigma=2.951437
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5546 mas, bmaj=1.652 mas, bpa=-5.383 degrees
! Estimated noise=1.11636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.637915 Jy
! Component: 100  -  total flux cleaned = 0.777758 Jy
! Component: 150  -  total flux cleaned = 0.821597 Jy
! Component: 200  -  total flux cleaned = 0.847902 Jy
! Total flux subtracted in 200 components = 0.847902 Jy
! Clean residual min=-0.017910 max=0.022112 Jy/beam
! Clean residual mean=-0.000023 rms=0.004033 Jy/beam
! Combined flux in latest and established models = 0.847902 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.847902 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7698 mas, bmaj=2.047 mas, bpa=-5.238 degrees
! Estimated noise=0.489295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0313037 Jy
! Component: 100  -  total flux cleaned = 0.0522276 Jy
! Component: 150  -  total flux cleaned = 0.068391 Jy
! Component: 200  -  total flux cleaned = 0.0815607 Jy
! Total flux subtracted in 200 components = 0.0815607 Jy
! Clean residual min=-0.010600 max=0.013688 Jy/beam
! Clean residual mean=-0.000072 rms=0.004133 Jy/beam
! Combined flux in latest and established models = 0.929463 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 50 components and 0.929463 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.928 mas, bmaj=6.968 mas, bpa=-5.236 degrees
! Estimated noise=0.656939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202364 Jy
! Component: 100  -  total flux cleaned = 0.0337652 Jy
! Component: 150  -  total flux cleaned = 0.0434119 Jy
! Component: 200  -  total flux cleaned = 0.050342 Jy
! Total flux subtracted in 200 components = 0.050342 Jy
! Clean residual min=-0.011240 max=0.009934 Jy/beam
! Clean residual mean=-0.000064 rms=0.003517 Jy/beam
! Combined flux in latest and established models = 0.979805 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501709 Jy
! Component: 100  -  total flux cleaned = 0.00866527 Jy
! Component: 150  -  total flux cleaned = 0.011144 Jy
! Component: 200  -  total flux cleaned = 0.0119258 Jy
! Total flux subtracted in 200 components = 0.0119258 Jy
! Clean residual min=-0.009236 max=0.009666 Jy/beam
! Clean residual mean=-0.000036 rms=0.002685 Jy/beam
! Combined flux in latest and established models = 0.99173 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 100 components and 0.991731 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7698 mas, bmaj=2.047 mas, bpa=-5.238 degrees
! Estimated noise=0.489295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221921 Jy
! Component: 100  -  total flux cleaned = 0.00272676 Jy
! Component: 150  -  total flux cleaned = 0.00317378 Jy
! Component: 200  -  total flux cleaned = 0.00317932 Jy
! Total flux subtracted in 200 components = 0.00317932 Jy
! Clean residual min=-0.009509 max=0.008417 Jy/beam
! Clean residual mean=-0.000012 rms=0.001675 Jy/beam
! Combined flux in latest and established models = 0.99491 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 115 components and 0.99491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.152981Jy  sigma=2.850207
! Fit after  self-cal, rms=0.152895Jy  sigma=2.848106
wmodel /J0648-3044_X_map.mod
! wmodel: Unable to open new model file: /J0648-3044_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0648-3044_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7698 x 2.047 at -5.238 degrees (North through East)
! Clean map  min=-0.0078671  max=0.8254 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0648-3044_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.825402 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00163658 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.594829 0.594829 1.18966 2.37931 4.75863 9.51726 19.0345 38.069 76.1381
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0049 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.825 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  504.346 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0648-3044_X_dfm.log closed on Thu May 19 23:55:42 2016