! Started logfile: /scr/pima/bg219a_uvs/J0639+7324_S_dfm.log on Thu May 19 23:55:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0639+7324_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0639+7324_S_uva.fits
! AN table 1: 14 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.928571 visibilities/baseline/integration-bin.
! Found source: J0639+7324
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0639+7324_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.107614Jy  sigma=22.590291
! Fit after  self-cal, rms=0.565727Jy  sigma=11.433004
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.322 mas, bmaj=18.98 mas, bpa=53.94 degrees
! Estimated noise=2.31399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.32124 Jy
! Component: 100  -  total flux cleaned = 0.393971 Jy
! Total flux subtracted in 100 components = 0.393971 Jy
! Clean residual min=-0.036026 max=0.036123 Jy/beam
! Clean residual mean=-0.000200 rms=0.012438 Jy/beam
! Combined flux in latest and established models = 0.393971 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.393971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124029Jy  sigma=2.393884
! Fit after  self-cal, rms=0.122686Jy  sigma=2.371349
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.906 mas, bmaj=18 mas, bpa=53.41 degrees
! Estimated noise=1.68996 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0696372 Jy
! Component: 100  -  total flux cleaned = 0.111802 Jy
! Component: 150  -  total flux cleaned = 0.138801 Jy
! Component: 200  -  total flux cleaned = 0.148782 Jy
! Total flux subtracted in 200 components = 0.148782 Jy
! Clean residual min=-0.012766 max=0.012671 Jy/beam
! Clean residual mean=-0.000242 rms=0.006434 Jy/beam
! Combined flux in latest and established models = 0.542753 Jy
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 97 components and 0.542753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059528Jy  sigma=1.157713
! Fit after  self-cal, rms=0.059024Jy  sigma=1.146289
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.906 x 18 at 53.41 degrees (North through East)
! Clean map  min=-0.014185  max=0.42036 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.02     OV        1.02     
!   PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.04     NL        1.02     OV        1.00     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.02     NL        1.01     OV        1.04     
!   PT        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.03     NL        0.99     OV        1.00     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.059024Jy  sigma=1.146289
! Fit after  self-cal, rms=0.051035Jy  sigma=1.029384
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=18.08 mas, bpa=53.48 degrees
! Estimated noise=1.64907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107815 Jy
! Component: 100  -  total flux cleaned = 0.00941292 Jy
! Component: 150  -  total flux cleaned = 0.00796538 Jy
! Component: 200  -  total flux cleaned = 0.00781262 Jy
! Total flux subtracted in 200 components = 0.00781262 Jy
! Clean residual min=-0.002048 max=0.002057 Jy/beam
! Clean residual mean=0.000002 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.550565 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 153 components and 0.550565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048265Jy  sigma=0.972922
! Fit after  self-cal, rms=0.048206Jy  sigma=0.971570
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048206Jy  sigma=0.971570
! Fit after  self-cal, rms=0.048008Jy  sigma=0.970052
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.946 mas, bmaj=18.07 mas, bpa=53.46 degrees
! Estimated noise=1.64466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133807 Jy
! Component: 100  -  total flux cleaned = 0.00193851 Jy
! Component: 150  -  total flux cleaned = 0.00229432 Jy
! Component: 200  -  total flux cleaned = 0.00255417 Jy
! Total flux subtracted in 200 components = 0.00255417 Jy
! Clean residual min=-0.000990 max=0.000993 Jy/beam
! Clean residual mean=0.000005 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.55312 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 191 components and 0.55312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047756Jy  sigma=0.964907
! Fit after  self-cal, rms=0.047743Jy  sigma=0.964684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258729 Jy
! Component: 100  -  total flux cleaned = 0.000186732 Jy
! Component: 150  -  total flux cleaned = 0.0004528 Jy
! Component: 200  -  total flux cleaned = 0.000493125 Jy
! Total flux subtracted in 200 components = 0.000493125 Jy
! Clean residual min=-0.000660 max=0.000658 Jy/beam
! Clean residual mean=0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.553613 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 238 components and 0.553613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047664Jy  sigma=0.963038
! Fit after  self-cal, rms=0.047661Jy  sigma=0.962975
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047661Jy  sigma=0.962975
! Fit after  self-cal, rms=0.047665Jy  sigma=0.962808
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=18.07 mas, bpa=53.46 degrees
! Estimated noise=1.64491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249693 Jy
! Component: 100  -  total flux cleaned = 0.000327673 Jy
! Component: 150  -  total flux cleaned = 0.000327637 Jy
! Component: 200  -  total flux cleaned = 0.000327645 Jy
! Total flux subtracted in 200 components = 0.000327645 Jy
! Clean residual min=-0.000535 max=0.000530 Jy/beam
! Clean residual mean=0.000001 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.55394 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 265 components and 0.55394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047614Jy  sigma=0.961845
! Fit after  self-cal, rms=0.047613Jy  sigma=0.961803
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.28754e-05 Jy
! Component: 100  -  total flux cleaned = -1.24727e-05 Jy
! Component: 150  -  total flux cleaned = -6.7266e-05 Jy
! Component: 200  -  total flux cleaned = -6.71851e-05 Jy
! Total flux subtracted in 200 components = -6.71851e-05 Jy
! Clean residual min=-0.000434 max=0.000433 Jy/beam
! Clean residual mean=-0.000000 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.553873 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 299 components and 0.553873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047583Jy  sigma=0.961225
! Fit after  self-cal, rms=0.047582Jy  sigma=0.961199
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047582Jy  sigma=0.961199
! Fit after  self-cal, rms=0.047586Jy  sigma=0.961159
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.46 mas, bmaj=28.23 mas, bpa=36.32 degrees
! Estimated noise=2.06586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000482057 Jy
! Component: 100  -  total flux cleaned = 0.000673227 Jy
! Component: 150  -  total flux cleaned = 0.000918872 Jy
! Component: 200  -  total flux cleaned = 0.0011476 Jy
! Total flux subtracted in 200 components = 0.0011476 Jy
! Clean residual min=-0.000315 max=0.000321 Jy/beam
! Clean residual mean=0.000001 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.555021 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 325 components and 0.555021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047579Jy  sigma=0.960955
! Fit after  self-cal, rms=0.047578Jy  sigma=0.960937
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.29284e-05 Jy
! Component: 100  -  total flux cleaned = -7.7903e-05 Jy
! Component: 150  -  total flux cleaned = -9.25007e-05 Jy
! Component: 200  -  total flux cleaned = -8.13906e-06 Jy
! Total flux subtracted in 200 components = -8.13906e-06 Jy
! Clean residual min=-0.000230 max=0.000231 Jy/beam
! Clean residual mean=-0.000001 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.555013 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 368 components and 0.555013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047572Jy  sigma=0.960790
! Fit after  self-cal, rms=0.047570Jy  sigma=0.960776
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.948 mas, bmaj=18.07 mas, bpa=53.46 degrees
! Estimated noise=1.64503 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.948 x 18.07 at 53.46 degrees (North through East)
! Clean map  min=-0.0039202  max=0.40927 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.346 mas, bmaj=18.96 mas, bpa=53.98 degrees
! Estimated noise=2.2906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.317896 Jy
! Component: 100  -  total flux cleaned = 0.383893 Jy
! Component: 150  -  total flux cleaned = 0.41364 Jy
! Component: 200  -  total flux cleaned = 0.428596 Jy
! Total flux subtracted in 200 components = 0.428596 Jy
! Clean residual min=-0.015889 max=0.015929 Jy/beam
! Clean residual mean=-0.000129 rms=0.006204 Jy/beam
! Combined flux in latest and established models = 0.428596 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.428596 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.948 mas, bmaj=18.07 mas, bpa=53.46 degrees
! Estimated noise=1.64503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386591 Jy
! Component: 100  -  total flux cleaned = 0.0592231 Jy
! Component: 150  -  total flux cleaned = 0.061427 Jy
! Component: 200  -  total flux cleaned = 0.0603182 Jy
! Total flux subtracted in 200 components = 0.0603182 Jy
! Clean residual min=-0.008538 max=0.008630 Jy/beam
! Clean residual mean=-0.000148 rms=0.004194 Jy/beam
! Combined flux in latest and established models = 0.488914 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 136 components and 0.488914 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.46 mas, bmaj=28.23 mas, bpa=36.32 degrees
! Estimated noise=2.06586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0070452 Jy
! Component: 100  -  total flux cleaned = 0.0053937 Jy
! Component: 150  -  total flux cleaned = 0.00604823 Jy
! Component: 200  -  total flux cleaned = 0.00778805 Jy
! Total flux subtracted in 200 components = 0.00778805 Jy
! Clean residual min=-0.003779 max=0.003801 Jy/beam
! Clean residual mean=-0.000077 rms=0.001803 Jy/beam
! Combined flux in latest and established models = 0.496702 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171985 Jy
! Component: 100  -  total flux cleaned = 0.00191868 Jy
! Component: 150  -  total flux cleaned = 0.00176033 Jy
! Component: 200  -  total flux cleaned = 0.00030393 Jy
! Total flux subtracted in 200 components = 0.00030393 Jy
! Clean residual min=-0.002705 max=0.002671 Jy/beam
! Clean residual mean=0.000003 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 0.497006 Jy
! Adding 147 model components to the UV plane model.
! The established model now contains 279 components and 0.497006 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.948 mas, bmaj=18.07 mas, bpa=53.46 degrees
! Estimated noise=1.64503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000834272 Jy
! Component: 100  -  total flux cleaned = 0.000637071 Jy
! Component: 150  -  total flux cleaned = 0.000637682 Jy
! Component: 200  -  total flux cleaned = 0.000706139 Jy
! Total flux subtracted in 200 components = 0.000706139 Jy
! Clean residual min=-0.001008 max=0.001009 Jy/beam
! Clean residual mean=0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.497712 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 321 components and 0.497712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047639Jy  sigma=0.962130
! Fit after  self-cal, rms=0.047613Jy  sigma=0.961675
wmodel /J0639+7324_S_map.mod
! wmodel: Unable to open new model file: /J0639+7324_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0639+7324_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.948 x 18.07 at 53.46 degrees (North through East)
! Clean map  min=-0.0094942  max=0.39686 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0639+7324_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.396858 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000288837 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.218343 0.218343 0.436685 0.873371 1.74674 3.49348 6.98696 13.9739 27.9479 55.8957
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.396 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1373.99 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0639+7324_S_dfm.log closed on Thu May 19 23:55:07 2016