! Started logfile: /scr/pima/bg219a_uvs/J0630-1323_S_dfm.log on Thu May 19 23:54:57 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0630-1323_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0630-1323_S_uva.fits
! AN table 1: 42 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0630-1323
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0630-1323_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012644Jy  sigma=22.421772
! Fit after  self-cal, rms=0.845440Jy  sigma=18.454165
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.405 mas, bmaj=5.86 mas, bpa=-2.62 degrees
! Estimated noise=0.985448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1137 Jy
! Component: 100  -  total flux cleaned = 0.149233 Jy
! Total flux subtracted in 100 components = 0.149233 Jy
! Clean residual min=-0.009914 max=0.016925 Jy/beam
! Clean residual mean=0.000004 rms=0.003100 Jy/beam
! Combined flux in latest and established models = 0.149233 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.149233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069347Jy  sigma=1.477067
! Fit after  self-cal, rms=0.069355Jy  sigma=1.476131
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.804 mas, bmaj=6.844 mas, bpa=-3.333 degrees
! Estimated noise=0.667677 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027403 Jy
! Component: 100  -  total flux cleaned = 0.0410542 Jy
! Component: 150  -  total flux cleaned = 0.0483444 Jy
! Component: 200  -  total flux cleaned = 0.0522997 Jy
! Total flux subtracted in 200 components = 0.0522997 Jy
! Clean residual min=-0.004491 max=0.003874 Jy/beam
! Clean residual mean=0.000009 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.201532 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 31 components and 0.201532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059233Jy  sigma=1.215911
! Fit after  self-cal, rms=0.059228Jy  sigma=1.214094
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.804 x 6.844 at -3.333 degrees (North through East)
! Clean map  min=-0.0041795  max=0.15918 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.04     NL        0.97     OV        1.04     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        1.01     OV        0.98     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        0.97     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.00     NL        0.98     OV        0.97     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.059228Jy  sigma=1.214094
! Fit after  self-cal, rms=0.058838Jy  sigma=1.206090
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.827 mas, bmaj=6.878 mas, bpa=-3.35 degrees
! Estimated noise=0.662984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00039841 Jy
! Component: 100  -  total flux cleaned = -0.000380282 Jy
! Component: 150  -  total flux cleaned = -0.000345605 Jy
! Component: 200  -  total flux cleaned = -0.000300453 Jy
! Total flux subtracted in 200 components = -0.000300453 Jy
! Clean residual min=-0.003879 max=0.003519 Jy/beam
! Clean residual mean=0.000007 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.201232 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 0.201232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058828Jy  sigma=1.205798
! Fit after  self-cal, rms=0.058832Jy  sigma=1.205705
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058832Jy  sigma=1.205705
! Fit after  self-cal, rms=0.058683Jy  sigma=1.202496
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.831 mas, bmaj=6.878 mas, bpa=-3.436 degrees
! Estimated noise=0.663074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000308839 Jy
! Component: 100  -  total flux cleaned = -0.000309881 Jy
! Component: 150  -  total flux cleaned = -0.000296363 Jy
! Component: 200  -  total flux cleaned = -0.000283881 Jy
! Total flux subtracted in 200 components = -0.000283881 Jy
! Clean residual min=-0.003657 max=0.003576 Jy/beam
! Clean residual mean=0.000005 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.200948 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 40 components and 0.200948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058676Jy  sigma=1.202269
! Fit after  self-cal, rms=0.058671Jy  sigma=1.202209
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100314 Jy
! Component: 100  -  total flux cleaned = -8.67035e-05 Jy
! Component: 150  -  total flux cleaned = -5.06492e-05 Jy
! Component: 200  -  total flux cleaned = -3.97324e-05 Jy
! Total flux subtracted in 200 components = -3.97324e-05 Jy
! Clean residual min=-0.003615 max=0.003563 Jy/beam
! Clean residual mean=0.000005 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.200908 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.200908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058667Jy  sigma=1.202077
! Fit after  self-cal, rms=0.058664Jy  sigma=1.202058
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058664Jy  sigma=1.202058
! Fit after  self-cal, rms=0.058688Jy  sigma=1.202036
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=6.879 mas, bpa=-3.434 degrees
! Estimated noise=0.66313 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000255056 Jy
! Component: 100  -  total flux cleaned = -0.000255139 Jy
! Component: 150  -  total flux cleaned = -0.000245176 Jy
! Component: 200  -  total flux cleaned = -0.000235993 Jy
! Total flux subtracted in 200 components = -0.000235993 Jy
! Clean residual min=-0.003554 max=0.003556 Jy/beam
! Clean residual mean=0.000005 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.200672 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.200672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058684Jy  sigma=1.201916
! Fit after  self-cal, rms=0.058682Jy  sigma=1.201901
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.45592e-05 Jy
! Component: 100  -  total flux cleaned = -5.37334e-05 Jy
! Component: 150  -  total flux cleaned = -3.51307e-05 Jy
! Component: 200  -  total flux cleaned = -2.66152e-05 Jy
! Total flux subtracted in 200 components = -2.66152e-05 Jy
! Clean residual min=-0.003541 max=0.003544 Jy/beam
! Clean residual mean=0.000005 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.200646 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.200646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058679Jy  sigma=1.201821
! Fit after  self-cal, rms=0.058677Jy  sigma=1.201811
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058677Jy  sigma=1.201811
! Fit after  self-cal, rms=0.058723Jy  sigma=1.201799
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.103 mas, bmaj=15.96 mas, bpa=-5.421 degrees
! Estimated noise=0.884753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.92477e-05 Jy
! Component: 100  -  total flux cleaned = 4.77693e-05 Jy
! Component: 150  -  total flux cleaned = 4.55876e-05 Jy
! Component: 200  -  total flux cleaned = 4.3124e-05 Jy
! Total flux subtracted in 200 components = 4.3124e-05 Jy
! Clean residual min=-0.003192 max=0.003925 Jy/beam
! Clean residual mean=0.000010 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.200689 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.200689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058735Jy  sigma=1.202009
! Fit after  self-cal, rms=0.058727Jy  sigma=1.201726
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.43223e-05 Jy
! Component: 100  -  total flux cleaned = -4.76113e-05 Jy
! Component: 150  -  total flux cleaned = -5.06183e-05 Jy
! Component: 200  -  total flux cleaned = -5.30441e-05 Jy
! Total flux subtracted in 200 components = -5.30441e-05 Jy
! Clean residual min=-0.003190 max=0.003924 Jy/beam
! Clean residual mean=0.000010 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.200636 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 54 components and 0.200636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058740Jy  sigma=1.201968
! Fit after  self-cal, rms=0.058735Jy  sigma=1.201757
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=6.881 mas, bpa=-3.448 degrees
! Estimated noise=0.663316 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.834 x 6.881 at -3.448 degrees (North through East)
! Clean map  min=-0.0032867  max=0.1586 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.423 mas, bmaj=5.874 mas, bpa=-2.716 degrees
! Estimated noise=0.988328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113696 Jy
! Component: 100  -  total flux cleaned = 0.148801 Jy
! Component: 150  -  total flux cleaned = 0.16821 Jy
! Component: 200  -  total flux cleaned = 0.17976 Jy
! Total flux subtracted in 200 components = 0.17976 Jy
! Clean residual min=-0.006294 max=0.006292 Jy/beam
! Clean residual mean=0.000003 rms=0.001600 Jy/beam
! Combined flux in latest and established models = 0.17976 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.17976 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=6.881 mas, bpa=-3.448 degrees
! Estimated noise=0.663316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105075 Jy
! Component: 100  -  total flux cleaned = 0.0159379 Jy
! Component: 150  -  total flux cleaned = 0.019189 Jy
! Component: 200  -  total flux cleaned = 0.0205853 Jy
! Total flux subtracted in 200 components = 0.0205853 Jy
! Clean residual min=-0.003657 max=0.003196 Jy/beam
! Clean residual mean=0.000006 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.200345 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 46 components and 0.200345 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.103 mas, bmaj=15.96 mas, bpa=-5.421 degrees
! Estimated noise=0.884753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122145 Jy
! Component: 100  -  total flux cleaned = 0.0012633 Jy
! Component: 150  -  total flux cleaned = 0.00126735 Jy
! Component: 200  -  total flux cleaned = 0.00126823 Jy
! Total flux subtracted in 200 components = 0.00126823 Jy
! Clean residual min=-0.003287 max=0.003710 Jy/beam
! Clean residual mean=0.000010 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.201613 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.71328e-05 Jy
! Component: 100  -  total flux cleaned = -3.17881e-05 Jy
! Component: 150  -  total flux cleaned = -4.43382e-05 Jy
! Component: 200  -  total flux cleaned = -4.42429e-05 Jy
! Total flux subtracted in 200 components = -4.42429e-05 Jy
! Clean residual min=-0.003236 max=0.003759 Jy/beam
! Clean residual mean=0.000010 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.201569 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 64 components and 0.201569 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=6.881 mas, bpa=-3.448 degrees
! Estimated noise=0.663316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160601 Jy
! Component: 100  -  total flux cleaned = 0.000160113 Jy
! Component: 150  -  total flux cleaned = 0.000203508 Jy
! Component: 200  -  total flux cleaned = 0.000126581 Jy
! Total flux subtracted in 200 components = 0.000126581 Jy
! Clean residual min=-0.003419 max=0.003431 Jy/beam
! Clean residual mean=0.000005 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.201696 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 76 components and 0.201696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058589Jy  sigma=1.198782
! Fit after  self-cal, rms=0.058573Jy  sigma=1.198459
wmodel /J0630-1323_S_map.mod
! wmodel: Unable to open new model file: /J0630-1323_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0630-1323_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.834 x 6.881 at -3.448 degrees (North through East)
! Clean map  min=-0.0032596  max=0.15684 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0630-1323_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.156835 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000797994 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.52643 1.52643 3.05286 6.10573 12.2115 24.4229 48.8458 97.6916
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.156 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  196.536 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0630-1323_S_dfm.log closed on Thu May 19 23:54:59 2016