! Started logfile: /scr/pima/bg219a_uvs/J0622-1927_S_dfm.log on Thu May 19 23:54:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0622-1927_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0622-1927_S_uva.fits
! AN table 1: 60 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.866667 visibilities/baseline/integration-bin.
! Found source: J0622-1927
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0622-1927_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022652Jy  sigma=21.769281
! Fit after  self-cal, rms=0.869766Jy  sigma=18.717200
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.564 mas, bmaj=7.161 mas, bpa=9.706 degrees
! Estimated noise=0.812973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103012 Jy
! Component: 100  -  total flux cleaned = 0.125476 Jy
! Total flux subtracted in 100 components = 0.125476 Jy
! Clean residual min=-0.004070 max=0.006265 Jy/beam
! Clean residual mean=0.000014 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.125476 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.125476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061256Jy  sigma=1.210555
! Fit after  self-cal, rms=0.061242Jy  sigma=1.210477
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.033 mas, bmaj=8.373 mas, bpa=7.221 degrees
! Estimated noise=0.632865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00546587 Jy
! Component: 100  -  total flux cleaned = 0.00723783 Jy
! Component: 150  -  total flux cleaned = 0.00742678 Jy
! Component: 200  -  total flux cleaned = 0.0074853 Jy
! Total flux subtracted in 200 components = 0.0074853 Jy
! Clean residual min=-0.002933 max=0.003043 Jy/beam
! Clean residual mean=0.000004 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.132961 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.132961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060803Jy  sigma=1.200672
! Fit after  self-cal, rms=0.060800Jy  sigma=1.200594
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.033 x 8.373 at 7.221 degrees (North through East)
! Clean map  min=-0.0028875  max=0.13225 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.98     NL        0.97     OV        1.03     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.02     NL        0.98     OV        1.03     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        1.00     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.060800Jy  sigma=1.200594
! Fit after  self-cal, rms=0.060583Jy  sigma=1.198061
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.033 mas, bmaj=8.368 mas, bpa=7.171 degrees
! Estimated noise=0.631166 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.64125e-05 Jy
! Component: 100  -  total flux cleaned = 9.56495e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110314 Jy
! Component: 200  -  total flux cleaned = 0.000149573 Jy
! Total flux subtracted in 200 components = 0.000149573 Jy
! Clean residual min=-0.002732 max=0.003154 Jy/beam
! Clean residual mean=0.000005 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.133111 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 20 components and 0.133111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060571Jy  sigma=1.197904
! Fit after  self-cal, rms=0.060573Jy  sigma=1.197845
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060573Jy  sigma=1.197845
! Fit after  self-cal, rms=0.060576Jy  sigma=1.195091
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.032 mas, bmaj=8.382 mas, bpa=7.09 degrees
! Estimated noise=0.63117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.42009e-05 Jy
! Component: 100  -  total flux cleaned = 6.86192e-05 Jy
! Component: 150  -  total flux cleaned = 9.76039e-05 Jy
! Component: 200  -  total flux cleaned = 0.000121954 Jy
! Total flux subtracted in 200 components = 0.000121954 Jy
! Clean residual min=-0.002491 max=0.002750 Jy/beam
! Clean residual mean=0.000004 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.133233 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 26 components and 0.133233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060564Jy  sigma=1.194940
! Fit after  self-cal, rms=0.060568Jy  sigma=1.194873
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.64587e-05 Jy
! Component: 100  -  total flux cleaned = 7.98161e-05 Jy
! Component: 150  -  total flux cleaned = 8.87612e-05 Jy
! Component: 200  -  total flux cleaned = 8.88021e-05 Jy
! Total flux subtracted in 200 components = 8.88021e-05 Jy
! Clean residual min=-0.002506 max=0.002742 Jy/beam
! Clean residual mean=0.000003 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.133321 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 29 components and 0.133322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060564Jy  sigma=1.194821
! Fit after  self-cal, rms=0.060564Jy  sigma=1.194813
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060564Jy  sigma=1.194813
! Fit after  self-cal, rms=0.060645Jy  sigma=1.194754
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.03 mas, bmaj=8.389 mas, bpa=7.053 degrees
! Estimated noise=0.631159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132949 Jy
! Component: 100  -  total flux cleaned = 0.000184846 Jy
! Component: 150  -  total flux cleaned = 0.00020609 Jy
! Component: 200  -  total flux cleaned = 0.000214921 Jy
! Total flux subtracted in 200 components = 0.000214921 Jy
! Clean residual min=-0.002480 max=0.002734 Jy/beam
! Clean residual mean=0.000003 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.133536 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.133536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060638Jy  sigma=1.194687
! Fit after  self-cal, rms=0.060641Jy  sigma=1.194674
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.48221e-05 Jy
! Component: 100  -  total flux cleaned = 5.41362e-05 Jy
! Component: 150  -  total flux cleaned = 5.43258e-05 Jy
! Component: 200  -  total flux cleaned = 3.97364e-05 Jy
! Total flux subtracted in 200 components = 3.97364e-05 Jy
! Clean residual min=-0.002480 max=0.002712 Jy/beam
! Clean residual mean=0.000002 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.133576 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 33 components and 0.133576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060638Jy  sigma=1.194644
! Fit after  self-cal, rms=0.060639Jy  sigma=1.194641
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060639Jy  sigma=1.194641
! Fit after  self-cal, rms=0.060666Jy  sigma=1.194606
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.445 mas, bmaj=18.89 mas, bpa=1.069 degrees
! Estimated noise=0.807282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000282524 Jy
! Component: 100  -  total flux cleaned = 0.000298117 Jy
! Component: 150  -  total flux cleaned = 0.000312657 Jy
! Component: 200  -  total flux cleaned = 0.000332251 Jy
! Total flux subtracted in 200 components = 0.000332251 Jy
! Clean residual min=-0.002906 max=0.003204 Jy/beam
! Clean residual mean=0.000005 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.133908 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 40 components and 0.133908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060665Jy  sigma=1.194638
! Fit after  self-cal, rms=0.060666Jy  sigma=1.194621
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.34869e-06 Jy
! Component: 100  -  total flux cleaned = 3.0971e-05 Jy
! Component: 150  -  total flux cleaned = 4.3785e-05 Jy
! Component: 200  -  total flux cleaned = 4.98579e-05 Jy
! Total flux subtracted in 200 components = 4.98579e-05 Jy
! Clean residual min=-0.002903 max=0.003198 Jy/beam
! Clean residual mean=0.000005 rms=0.001045 Jy/beam
! Combined flux in latest and established models = 0.133958 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.133958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060666Jy  sigma=1.194646
! Fit after  self-cal, rms=0.060666Jy  sigma=1.194636
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.028 mas, bmaj=8.392 mas, bpa=7.035 degrees
! Estimated noise=0.631046 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.028 x 8.392 at 7.035 degrees (North through East)
! Clean map  min=-0.0023592  max=0.13122 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.562 mas, bmaj=7.173 mas, bpa=9.498 degrees
! Estimated noise=0.811771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102838 Jy
! Component: 100  -  total flux cleaned = 0.125283 Jy
! Component: 150  -  total flux cleaned = 0.130609 Jy
! Component: 200  -  total flux cleaned = 0.131253 Jy
! Total flux subtracted in 200 components = 0.131253 Jy
! Clean residual min=-0.003147 max=0.003578 Jy/beam
! Clean residual mean=0.000003 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.131253 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.131253 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.028 mas, bmaj=8.392 mas, bpa=7.035 degrees
! Estimated noise=0.631046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159702 Jy
! Component: 100  -  total flux cleaned = 0.00181598 Jy
! Component: 150  -  total flux cleaned = 0.00198227 Jy
! Component: 200  -  total flux cleaned = 0.00210874 Jy
! Total flux subtracted in 200 components = 0.00210874 Jy
! Clean residual min=-0.002446 max=0.002783 Jy/beam
! Clean residual mean=0.000003 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.133362 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 0.133362 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.445 mas, bmaj=18.89 mas, bpa=1.069 degrees
! Estimated noise=0.807282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505678 Jy
! Component: 100  -  total flux cleaned = 0.000524601 Jy
! Component: 150  -  total flux cleaned = 0.000541912 Jy
! Component: 200  -  total flux cleaned = 0.000557961 Jy
! Total flux subtracted in 200 components = 0.000557961 Jy
! Clean residual min=-0.002883 max=0.003167 Jy/beam
! Clean residual mean=0.000005 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.13392 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.48799e-05 Jy
! Component: 100  -  total flux cleaned = 2.15257e-05 Jy
! Component: 150  -  total flux cleaned = 3.4268e-05 Jy
! Component: 200  -  total flux cleaned = 4.00483e-05 Jy
! Total flux subtracted in 200 components = 4.00483e-05 Jy
! Clean residual min=-0.002905 max=0.003182 Jy/beam
! Clean residual mean=0.000004 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.13396 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.13396 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.028 mas, bmaj=8.392 mas, bpa=7.035 degrees
! Estimated noise=0.631046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129078 Jy
! Component: 100  -  total flux cleaned = -0.00014519 Jy
! Component: 150  -  total flux cleaned = -0.000116941 Jy
! Component: 200  -  total flux cleaned = -9.3541e-05 Jy
! Total flux subtracted in 200 components = -9.3541e-05 Jy
! Clean residual min=-0.002547 max=0.002762 Jy/beam
! Clean residual mean=0.000002 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.133866 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 33 components and 0.133866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060665Jy  sigma=1.194666
! Fit after  self-cal, rms=0.060666Jy  sigma=1.194643
wmodel /J0622-1927_S_map.mod
! wmodel: Unable to open new model file: /J0622-1927_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0622-1927_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.028 x 8.392 at 7.035 degrees (North through East)
! Clean map  min=-0.0023795  max=0.13066 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0622-1927_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.130662 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000676854 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.55405 1.55405 3.1081 6.21621 12.4324 24.8648 49.7297 99.4593
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.13 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  193.043 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0622-1927_S_dfm.log closed on Thu May 19 23:54:46 2016