! Started logfile: /scr/pima/bg219a_uvs/J0621+7605_S_dfm.log on Thu May 19 23:54:38 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0621+7605_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0621+7605_S_uva.fits
! AN table 1: 30 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.92 visibilities/baseline/integration-bin.
! Found source: J0621+7605
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1656 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0621+7605_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002635Jy  sigma=20.089816
! Fit after  self-cal, rms=0.885295Jy  sigma=17.504006
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.101 mas, bmaj=10.74 mas, bpa=43.65 degrees
! Estimated noise=1.75438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0894518 Jy
! Component: 100  -  total flux cleaned = 0.123452 Jy
! Total flux subtracted in 100 components = 0.123452 Jy
! Clean residual min=-0.014977 max=0.019011 Jy/beam
! Clean residual mean=-0.000065 rms=0.005114 Jy/beam
! Combined flux in latest and established models = 0.123452 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.123452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077743Jy  sigma=1.436410
! Fit after  self-cal, rms=0.076880Jy  sigma=1.427085
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.47 mas, bmaj=11.56 mas, bpa=42.47 degrees
! Estimated noise=0.944654 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027243 Jy
! Component: 100  -  total flux cleaned = 0.041526 Jy
! Component: 150  -  total flux cleaned = 0.0498158 Jy
! Component: 200  -  total flux cleaned = 0.0554127 Jy
! Total flux subtracted in 200 components = 0.0554127 Jy
! Clean residual min=-0.005923 max=0.005421 Jy/beam
! Clean residual mean=-0.000059 rms=0.001667 Jy/beam
! Combined flux in latest and established models = 0.178865 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.178865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068023Jy  sigma=1.190627
! Fit after  self-cal, rms=0.067559Jy  sigma=1.183109
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.47 x 11.56 at 42.47 degrees (North through East)
! Clean map  min=-0.0054751  max=0.12707 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.99     NL        1.02     OV        1.02     
!   PT        0.96     SC        1.12     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.08     NL        1.03     OV        0.93     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.99     NL        0.96     OV        0.92     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.067559Jy  sigma=1.183109
! Fit after  self-cal, rms=0.067186Jy  sigma=1.170251
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.501 mas, bmaj=11.61 mas, bpa=42.51 degrees
! Estimated noise=0.925478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233438 Jy
! Component: 100  -  total flux cleaned = 0.00206643 Jy
! Component: 150  -  total flux cleaned = 0.0018115 Jy
! Component: 200  -  total flux cleaned = 0.00168169 Jy
! Total flux subtracted in 200 components = 0.00168169 Jy
! Clean residual min=-0.003714 max=0.003604 Jy/beam
! Clean residual mean=0.000003 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.180547 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.180547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066994Jy  sigma=1.167637
! Fit after  self-cal, rms=0.067007Jy  sigma=1.166869
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067007Jy  sigma=1.166869
! Fit after  self-cal, rms=0.066498Jy  sigma=1.166760
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.496 mas, bmaj=11.6 mas, bpa=42.49 degrees
! Estimated noise=0.921878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120897 Jy
! Component: 100  -  total flux cleaned = 0.00126024 Jy
! Component: 150  -  total flux cleaned = 0.0012326 Jy
! Component: 200  -  total flux cleaned = 0.00118414 Jy
! Total flux subtracted in 200 components = 0.00118414 Jy
! Clean residual min=-0.003505 max=0.003632 Jy/beam
! Clean residual mean=0.000003 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.181731 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 61 components and 0.181731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066435Jy  sigma=1.166026
! Fit after  self-cal, rms=0.066412Jy  sigma=1.165765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.24971e-06 Jy
! Component: 100  -  total flux cleaned = 6.69196e-05 Jy
! Component: 150  -  total flux cleaned = 3.2479e-05 Jy
! Component: 200  -  total flux cleaned = 1.73868e-05 Jy
! Total flux subtracted in 200 components = 1.73868e-05 Jy
! Clean residual min=-0.003406 max=0.003596 Jy/beam
! Clean residual mean=0.000003 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.181748 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.181748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066387Jy  sigma=1.165526
! Fit after  self-cal, rms=0.066382Jy  sigma=1.165408
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066382Jy  sigma=1.165408
! Fit after  self-cal, rms=0.066255Jy  sigma=1.165388
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.494 mas, bmaj=11.6 mas, bpa=42.49 degrees
! Estimated noise=0.920832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397822 Jy
! Component: 100  -  total flux cleaned = 0.00055039 Jy
! Component: 150  -  total flux cleaned = 0.000647658 Jy
! Component: 200  -  total flux cleaned = 0.000708679 Jy
! Total flux subtracted in 200 components = 0.000708679 Jy
! Clean residual min=-0.003319 max=0.003585 Jy/beam
! Clean residual mean=0.000003 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.182457 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.182457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066242Jy  sigma=1.165281
! Fit after  self-cal, rms=0.066240Jy  sigma=1.165234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.02245e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118562 Jy
! Component: 150  -  total flux cleaned = 0.000140949 Jy
! Component: 200  -  total flux cleaned = 0.000151504 Jy
! Total flux subtracted in 200 components = 0.000151504 Jy
! Clean residual min=-0.003271 max=0.003530 Jy/beam
! Clean residual mean=0.000004 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.182608 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 0.182608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066232Jy  sigma=1.165176
! Fit after  self-cal, rms=0.066233Jy  sigma=1.165148
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066233Jy  sigma=1.165148
! Fit after  self-cal, rms=0.066269Jy  sigma=1.165141
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.129 mas, bmaj=25.23 mas, bpa=29.56 degrees
! Estimated noise=1.21581 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259544 Jy
! Component: 100  -  total flux cleaned = 0.000329978 Jy
! Component: 150  -  total flux cleaned = 0.000381131 Jy
! Component: 200  -  total flux cleaned = 0.000414958 Jy
! Total flux subtracted in 200 components = 0.000414958 Jy
! Clean residual min=-0.003572 max=0.003282 Jy/beam
! Clean residual mean=0.000011 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.183023 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 98 components and 0.183023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066267Jy  sigma=1.165176
! Fit after  self-cal, rms=0.066271Jy  sigma=1.165109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.17403e-06 Jy
! Component: 100  -  total flux cleaned = 3.17451e-05 Jy
! Component: 150  -  total flux cleaned = 3.21369e-05 Jy
! Component: 200  -  total flux cleaned = 3.22971e-05 Jy
! Total flux subtracted in 200 components = 3.22971e-05 Jy
! Clean residual min=-0.003521 max=0.003232 Jy/beam
! Clean residual mean=0.000011 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.183056 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 102 components and 0.183056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066270Jy  sigma=1.165151
! Fit after  self-cal, rms=0.066272Jy  sigma=1.165091
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=11.6 mas, bpa=42.5 degrees
! Estimated noise=0.920956 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.493 x 11.6 at 42.5 degrees (North through East)
! Clean map  min=-0.0029041  max=0.12353 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.117 mas, bmaj=10.74 mas, bpa=43.71 degrees
! Estimated noise=1.72269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0879131 Jy
! Component: 100  -  total flux cleaned = 0.124069 Jy
! Component: 150  -  total flux cleaned = 0.145334 Jy
! Component: 200  -  total flux cleaned = 0.153974 Jy
! Total flux subtracted in 200 components = 0.153974 Jy
! Clean residual min=-0.008934 max=0.009175 Jy/beam
! Clean residual mean=-0.000027 rms=0.002669 Jy/beam
! Combined flux in latest and established models = 0.153974 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.153974 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=11.6 mas, bpa=42.5 degrees
! Estimated noise=0.920956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100814 Jy
! Component: 100  -  total flux cleaned = 0.0155762 Jy
! Component: 150  -  total flux cleaned = 0.0190273 Jy
! Component: 200  -  total flux cleaned = 0.021465 Jy
! Total flux subtracted in 200 components = 0.021465 Jy
! Clean residual min=-0.004073 max=0.003462 Jy/beam
! Clean residual mean=-0.000028 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 0.175439 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 54 components and 0.175439 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.129 mas, bmaj=25.23 mas, bpa=29.56 degrees
! Estimated noise=1.21581 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00321539 Jy
! Component: 100  -  total flux cleaned = 0.00493359 Jy
! Component: 150  -  total flux cleaned = 0.00592113 Jy
! Component: 200  -  total flux cleaned = 0.00652997 Jy
! Total flux subtracted in 200 components = 0.00652997 Jy
! Clean residual min=-0.003864 max=0.003182 Jy/beam
! Clean residual mean=-0.000001 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 0.181969 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314739 Jy
! Component: 100  -  total flux cleaned = 0.000417973 Jy
! Component: 150  -  total flux cleaned = 0.000525588 Jy
! Component: 200  -  total flux cleaned = 0.000612407 Jy
! Total flux subtracted in 200 components = 0.000612407 Jy
! Clean residual min=-0.003687 max=0.003211 Jy/beam
! Clean residual mean=0.000006 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.182581 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 90 components and 0.182581 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=11.6 mas, bpa=42.5 degrees
! Estimated noise=0.920956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149254 Jy
! Component: 100  -  total flux cleaned = 0.000212523 Jy
! Component: 150  -  total flux cleaned = 0.000423824 Jy
! Component: 200  -  total flux cleaned = 0.000501522 Jy
! Total flux subtracted in 200 components = 0.000501522 Jy
! Clean residual min=-0.003401 max=0.003430 Jy/beam
! Clean residual mean=0.000004 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.183083 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 107 components and 0.183083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066300Jy  sigma=1.165395
! Fit after  self-cal, rms=0.066280Jy  sigma=1.165254
wmodel /J0621+7605_S_map.mod
! wmodel: Unable to open new model file: /J0621+7605_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0621+7605_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.493 x 11.6 at 42.5 degrees (North through East)
! Clean map  min=-0.0029269  max=0.12227 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0621+7605_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.122268 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000844481 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.07203 2.07203 4.14407 8.28814 16.5763 33.1526 66.3051
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.122 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  144.785 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0621+7605_S_dfm.log closed on Thu May 19 23:54:40 2016