! Started logfile: /scr/pima/bg219a_uvs/J0617-1715_X_dfm.log on Thu May 19 23:54:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0617-1715_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0617-1715_X_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0617-1715
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 10440 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0617-1715_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006142Jy  sigma=26.898882
! Fit after  self-cal, rms=0.903609Jy  sigma=24.090227
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5977 mas, bmaj=1.494 mas, bpa=-0.03684 degrees
! Estimated noise=0.458434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0718481 Jy
! Component: 100  -  total flux cleaned = 0.0902748 Jy
! Total flux subtracted in 100 components = 0.0902748 Jy
! Clean residual min=-0.005647 max=0.008541 Jy/beam
! Clean residual mean=0.000004 rms=0.001508 Jy/beam
! Combined flux in latest and established models = 0.0902748 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0902748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056550Jy  sigma=1.450544
! Fit after  self-cal, rms=0.056498Jy  sigma=1.448110
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00909326 Jy
! Component: 100  -  total flux cleaned = 0.0145659 Jy
! Total flux subtracted in 100 components = 0.0145659 Jy
! Clean residual min=-0.004533 max=0.006547 Jy/beam
! Clean residual mean=0.000003 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.104841 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.104841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054261Jy  sigma=1.376286
! Fit after  self-cal, rms=0.054296Jy  sigma=1.375552
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7509 mas, bmaj=1.762 mas, bpa=-0.6709 degrees
! Estimated noise=0.267351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00651013 Jy
! Component: 100  -  total flux cleaned = 0.0099805 Jy
! Component: 150  -  total flux cleaned = 0.0118931 Jy
! Component: 200  -  total flux cleaned = 0.0127928 Jy
! Total flux subtracted in 200 components = 0.0127928 Jy
! Clean residual min=-0.004081 max=0.007433 Jy/beam
! Clean residual mean=0.000011 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.117634 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.117634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053585Jy  sigma=1.353845
! Fit after  self-cal, rms=0.053616Jy  sigma=1.353351
! Inverting map 
! Added new window around map position (1.8, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00729489 Jy
! Component: 100  -  total flux cleaned = 0.0109472 Jy
! Component: 150  -  total flux cleaned = 0.0117659 Jy
! Component: 200  -  total flux cleaned = 0.0121563 Jy
! Total flux subtracted in 200 components = 0.0121563 Jy
! Clean residual min=-0.002724 max=0.003758 Jy/beam
! Clean residual mean=0.000006 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.12979 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 43 components and 0.12979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052726Jy  sigma=1.324623
! Fit after  self-cal, rms=0.052593Jy  sigma=1.320934
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7509 x 1.762 at -0.6709 degrees (North through East)
! Clean map  min=-0.0024989  max=0.09796 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.08     OV        1.06     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.98     NL        1.02     OV        1.07     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.94     NL        1.04     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.98     NL        1.05     OV        1.05     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.04     NL        1.05     OV        1.04     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.02     OV        1.04     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.97     NL        1.08     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.95     NL        1.00     OV        1.05     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.93     NL        1.01     OV        1.05     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.98     NL        1.03     OV        1.03     
!   PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.052593Jy  sigma=1.320934
! Fit after  self-cal, rms=0.051850Jy  sigma=1.315267
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7465 mas, bmaj=1.758 mas, bpa=-0.7558 degrees
! Estimated noise=0.265935 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157103 Jy
! Component: 100  -  total flux cleaned = 0.00152869 Jy
! Component: 150  -  total flux cleaned = 0.00148802 Jy
! Component: 200  -  total flux cleaned = 0.00141713 Jy
! Total flux subtracted in 200 components = 0.00141713 Jy
! Clean residual min=-0.001824 max=0.001964 Jy/beam
! Clean residual mean=0.000001 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.131207 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.131207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051759Jy  sigma=1.312835
! Fit after  self-cal, rms=0.051743Jy  sigma=1.312527
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051743Jy  sigma=1.312527
! Fit after  self-cal, rms=0.051545Jy  sigma=1.309337
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7448 mas, bmaj=1.753 mas, bpa=-0.5292 degrees
! Estimated noise=0.265522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000523929 Jy
! Component: 100  -  total flux cleaned = 0.000579305 Jy
! Component: 150  -  total flux cleaned = 0.000628324 Jy
! Component: 200  -  total flux cleaned = 0.00069155 Jy
! Total flux subtracted in 200 components = 0.00069155 Jy
! Clean residual min=-0.001568 max=0.001500 Jy/beam
! Clean residual mean=-0.000001 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.131898 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.131898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051518Jy  sigma=1.308660
! Fit after  self-cal, rms=0.051516Jy  sigma=1.308557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310964 Jy
! Component: 100  -  total flux cleaned = 0.000348111 Jy
! Component: 150  -  total flux cleaned = 0.00034783 Jy
! Component: 200  -  total flux cleaned = 0.000362346 Jy
! Total flux subtracted in 200 components = 0.000362346 Jy
! Clean residual min=-0.001531 max=0.001453 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.132261 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 57 components and 0.132261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051505Jy  sigma=1.308282
! Fit after  self-cal, rms=0.051505Jy  sigma=1.308255
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051505Jy  sigma=1.308255
! Fit after  self-cal, rms=0.051334Jy  sigma=1.308211
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7439 mas, bmaj=1.751 mas, bpa=-0.5335 degrees
! Estimated noise=0.264909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000351767 Jy
! Component: 100  -  total flux cleaned = 0.000392888 Jy
! Component: 150  -  total flux cleaned = 0.000380743 Jy
! Component: 200  -  total flux cleaned = 0.000358235 Jy
! Total flux subtracted in 200 components = 0.000358235 Jy
! Clean residual min=-0.001485 max=0.001447 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.132619 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.132619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051327Jy  sigma=1.308046
! Fit after  self-cal, rms=0.051327Jy  sigma=1.308029
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164151 Jy
! Component: 100  -  total flux cleaned = 0.000153279 Jy
! Component: 150  -  total flux cleaned = 0.000133481 Jy
! Component: 200  -  total flux cleaned = 0.000114745 Jy
! Total flux subtracted in 200 components = 0.000114745 Jy
! Clean residual min=-0.001472 max=0.001403 Jy/beam
! Clean residual mean=-0.000001 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.132734 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.132734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051322Jy  sigma=1.307929
! Fit after  self-cal, rms=0.051322Jy  sigma=1.307922
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051322Jy  sigma=1.307922
! Fit after  self-cal, rms=0.051267Jy  sigma=1.307913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.042 mas, bmaj=4.848 mas, bpa=-2.81 degrees
! Estimated noise=0.36873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000417343 Jy
! Component: 100  -  total flux cleaned = 0.000429081 Jy
! Component: 150  -  total flux cleaned = 0.000429612 Jy
! Component: 200  -  total flux cleaned = 0.000439447 Jy
! Total flux subtracted in 200 components = 0.000439447 Jy
! Clean residual min=-0.001772 max=0.001802 Jy/beam
! Clean residual mean=-0.000001 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.133173 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 71 components and 0.133173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051269Jy  sigma=1.307922
! Fit after  self-cal, rms=0.051269Jy  sigma=1.307896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156523 Jy
! Component: 100  -  total flux cleaned = 0.000147114 Jy
! Component: 150  -  total flux cleaned = 0.000130662 Jy
! Component: 200  -  total flux cleaned = 0.000123612 Jy
! Total flux subtracted in 200 components = 0.000123612 Jy
! Clean residual min=-0.001763 max=0.001793 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.133297 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 76 components and 0.133297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051269Jy  sigma=1.307882
! Fit after  self-cal, rms=0.051269Jy  sigma=1.307877
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7435 mas, bmaj=1.751 mas, bpa=-0.5255 degrees
! Estimated noise=0.264718 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7435 x 1.751 at -0.5255 degrees (North through East)
! Clean map  min=-0.0015347  max=0.097098 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5923 mas, bmaj=1.49 mas, bpa=0.1473 degrees
! Estimated noise=0.451069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0705243 Jy
! Component: 100  -  total flux cleaned = 0.0893562 Jy
! Component: 150  -  total flux cleaned = 0.0992962 Jy
! Component: 200  -  total flux cleaned = 0.106341 Jy
! Total flux subtracted in 200 components = 0.106341 Jy
! Clean residual min=-0.004361 max=0.005134 Jy/beam
! Clean residual mean=0.000002 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.106341 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.106341 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7435 mas, bmaj=1.751 mas, bpa=-0.5255 degrees
! Estimated noise=0.264718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00887112 Jy
! Component: 100  -  total flux cleaned = 0.0142352 Jy
! Component: 150  -  total flux cleaned = 0.0178833 Jy
! Component: 200  -  total flux cleaned = 0.0204957 Jy
! Total flux subtracted in 200 components = 0.0204957 Jy
! Clean residual min=-0.002200 max=0.002027 Jy/beam
! Clean residual mean=0.000002 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.126837 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 43 components and 0.126837 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.042 mas, bmaj=4.848 mas, bpa=-2.81 degrees
! Estimated noise=0.36873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306424 Jy
! Component: 100  -  total flux cleaned = 0.00447889 Jy
! Component: 150  -  total flux cleaned = 0.00531584 Jy
! Component: 200  -  total flux cleaned = 0.00582018 Jy
! Total flux subtracted in 200 components = 0.00582018 Jy
! Clean residual min=-0.001920 max=0.001597 Jy/beam
! Clean residual mean=-0.000001 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.132657 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012709 Jy
! Component: 100  -  total flux cleaned = 0.000222367 Jy
! Component: 150  -  total flux cleaned = 0.000274764 Jy
! Component: 200  -  total flux cleaned = 0.000323291 Jy
! Total flux subtracted in 200 components = 0.000323291 Jy
! Clean residual min=-0.001827 max=0.001681 Jy/beam
! Clean residual mean=-0.000001 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.13298 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 64 components and 0.13298 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7435 mas, bmaj=1.751 mas, bpa=-0.5255 degrees
! Estimated noise=0.264718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000442738 Jy
! Component: 100  -  total flux cleaned = -0.000382973 Jy
! Component: 150  -  total flux cleaned = -0.000305353 Jy
! Component: 200  -  total flux cleaned = -0.000236286 Jy
! Total flux subtracted in 200 components = -0.000236286 Jy
! Clean residual min=-0.001564 max=0.001316 Jy/beam
! Clean residual mean=-0.000000 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.132744 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 76 components and 0.132744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051290Jy  sigma=1.308382
! Fit after  self-cal, rms=0.051271Jy  sigma=1.308107
wmodel /J0617-1715_X_map.mod
! wmodel: Unable to open new model file: /J0617-1715_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0617-1715_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7435 x 1.751 at -0.5255 degrees (North through East)
! Clean map  min=-0.0014318  max=0.097602 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0617-1715_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0976022 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000335739 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.03196 1.03196 2.06392 4.12785 8.2557 16.5114 33.0228 66.0456
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.097 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  290.708 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0617-1715_X_dfm.log closed on Thu May 19 23:54:29 2016