! Started logfile: /scr/pima/bg219a_uvs/J0617-1715_S_dfm.log on Thu May 19 23:54:23 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0617-1715_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0617-1715_S_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0617-1715
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0617-1715_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005723Jy  sigma=21.528724
! Fit after  self-cal, rms=0.905644Jy  sigma=19.353717
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.37 mas, bmaj=5.796 mas, bpa=-2.788 degrees
! Estimated noise=0.993636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0705151 Jy
! Component: 100  -  total flux cleaned = 0.0906863 Jy
! Total flux subtracted in 100 components = 0.0906863 Jy
! Clean residual min=-0.006176 max=0.009243 Jy/beam
! Clean residual mean=0.000039 rms=0.001778 Jy/beam
! Combined flux in latest and established models = 0.0906863 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0906863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063725Jy  sigma=1.283679
! Fit after  self-cal, rms=0.063556Jy  sigma=1.280040
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=6.722 mas, bpa=-3.168 degrees
! Estimated noise=0.580008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134502 Jy
! Component: 100  -  total flux cleaned = 0.0196825 Jy
! Component: 150  -  total flux cleaned = 0.0228298 Jy
! Component: 200  -  total flux cleaned = 0.024481 Jy
! Total flux subtracted in 200 components = 0.024481 Jy
! Clean residual min=-0.003781 max=0.003450 Jy/beam
! Clean residual mean=0.000010 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.115167 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 22 components and 0.115167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061079Jy  sigma=1.218645
! Fit after  self-cal, rms=0.061070Jy  sigma=1.217340
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.812 x 6.722 at -3.168 degrees (North through East)
! Clean map  min=-0.003651  max=0.096391 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.99     NL        0.99     OV        1.03     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        0.97     OV        1.01     
!   PT        1.04     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        0.98     OV        1.01     
!   PT        0.97     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.061070Jy  sigma=1.217340
! Fit after  self-cal, rms=0.060726Jy  sigma=1.214840
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.822 mas, bmaj=6.73 mas, bpa=-3 degrees
! Estimated noise=0.577167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350323 Jy
! Component: 100  -  total flux cleaned = 0.000291716 Jy
! Component: 150  -  total flux cleaned = 0.000291773 Jy
! Component: 200  -  total flux cleaned = 0.000292067 Jy
! Total flux subtracted in 200 components = 0.000292067 Jy
! Clean residual min=-0.003499 max=0.003330 Jy/beam
! Clean residual mean=0.000007 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.115459 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 30 components and 0.115459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060700Jy  sigma=1.214331
! Fit after  self-cal, rms=0.060700Jy  sigma=1.214204
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060700Jy  sigma=1.214204
! Fit after  self-cal, rms=0.060842Jy  sigma=1.212041
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.817 mas, bmaj=6.75 mas, bpa=-3.205 degrees
! Estimated noise=0.577087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.2363e-06 Jy
! Component: 100  -  total flux cleaned = 6.06859e-05 Jy
! Component: 150  -  total flux cleaned = 7.96012e-05 Jy
! Component: 200  -  total flux cleaned = 7.93692e-05 Jy
! Total flux subtracted in 200 components = 7.93692e-05 Jy
! Clean residual min=-0.003256 max=0.003170 Jy/beam
! Clean residual mean=0.000008 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.115539 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.115539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060827Jy  sigma=1.211757
! Fit after  self-cal, rms=0.060837Jy  sigma=1.211661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.14611e-05 Jy
! Component: 100  -  total flux cleaned = 1.27511e-05 Jy
! Component: 150  -  total flux cleaned = -1.30415e-06 Jy
! Component: 200  -  total flux cleaned = 1.16324e-05 Jy
! Total flux subtracted in 200 components = 1.16324e-05 Jy
! Clean residual min=-0.003249 max=0.003134 Jy/beam
! Clean residual mean=0.000008 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.11555 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.11555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060828Jy  sigma=1.211492
! Fit after  self-cal, rms=0.060825Jy  sigma=1.211455
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060825Jy  sigma=1.211455
! Fit after  self-cal, rms=0.060892Jy  sigma=1.211422
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.815 mas, bmaj=6.756 mas, bpa=-3.149 degrees
! Estimated noise=0.577483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110689 Jy
! Component: 100  -  total flux cleaned = 0.000125804 Jy
! Component: 150  -  total flux cleaned = 0.000153478 Jy
! Component: 200  -  total flux cleaned = 0.000153306 Jy
! Total flux subtracted in 200 components = 0.000153306 Jy
! Clean residual min=-0.003259 max=0.003138 Jy/beam
! Clean residual mean=0.000008 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.115704 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 43 components and 0.115704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060884Jy  sigma=1.211273
! Fit after  self-cal, rms=0.060883Jy  sigma=1.211246
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.6819e-06 Jy
! Component: 100  -  total flux cleaned = -2.17639e-05 Jy
! Component: 150  -  total flux cleaned = -2.18114e-05 Jy
! Component: 200  -  total flux cleaned = -2.18735e-05 Jy
! Total flux subtracted in 200 components = -2.18735e-05 Jy
! Clean residual min=-0.003251 max=0.003122 Jy/beam
! Clean residual mean=0.000008 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.115682 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.115682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060877Jy  sigma=1.211140
! Fit after  self-cal, rms=0.060875Jy  sigma=1.211117
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060875Jy  sigma=1.211117
! Fit after  self-cal, rms=0.060909Jy  sigma=1.211098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.18 mas, bmaj=16.27 mas, bpa=-3.968 degrees
! Estimated noise=0.777699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.49277e-06 Jy
! Component: 100  -  total flux cleaned = -2.6419e-06 Jy
! Component: 150  -  total flux cleaned = -2.24441e-06 Jy
! Component: 200  -  total flux cleaned = -2.22191e-06 Jy
! Total flux subtracted in 200 components = -2.22191e-06 Jy
! Clean residual min=-0.003820 max=0.004100 Jy/beam
! Clean residual mean=0.000020 rms=0.001176 Jy/beam
! Combined flux in latest and established models = 0.11568 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 47 components and 0.11568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060910Jy  sigma=1.211128
! Fit after  self-cal, rms=0.060898Jy  sigma=1.210889
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.40146e-05 Jy
! Component: 100  -  total flux cleaned = -6.0424e-05 Jy
! Component: 150  -  total flux cleaned = -6.37152e-05 Jy
! Component: 200  -  total flux cleaned = -6.55708e-05 Jy
! Total flux subtracted in 200 components = -6.55708e-05 Jy
! Clean residual min=-0.003802 max=0.004068 Jy/beam
! Clean residual mean=0.000020 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.115614 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 47 components and 0.115614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060899Jy  sigma=1.210926
! Fit after  self-cal, rms=0.060889Jy  sigma=1.210752
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.813 mas, bmaj=6.76 mas, bpa=-3.093 degrees
! Estimated noise=0.577737 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.813 x 6.76 at -3.093 degrees (North through East)
! Clean map  min=-0.0031346  max=0.096302 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.371 mas, bmaj=5.827 mas, bpa=-2.688 degrees
! Estimated noise=0.98957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0698673 Jy
! Component: 100  -  total flux cleaned = 0.0906119 Jy
! Component: 150  -  total flux cleaned = 0.101435 Jy
! Component: 200  -  total flux cleaned = 0.107832 Jy
! Total flux subtracted in 200 components = 0.107832 Jy
! Clean residual min=-0.004720 max=0.004884 Jy/beam
! Clean residual mean=0.000015 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.107832 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.107832 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.813 mas, bmaj=6.76 mas, bpa=-3.093 degrees
! Estimated noise=0.577737 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00520379 Jy
! Component: 100  -  total flux cleaned = 0.00812914 Jy
! Component: 150  -  total flux cleaned = 0.00899575 Jy
! Component: 200  -  total flux cleaned = 0.00958254 Jy
! Total flux subtracted in 200 components = 0.00958254 Jy
! Clean residual min=-0.003315 max=0.003021 Jy/beam
! Clean residual mean=0.000007 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.117414 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 34 components and 0.117414 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.18 mas, bmaj=16.27 mas, bpa=-3.968 degrees
! Estimated noise=0.777699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935602 Jy
! Component: 100  -  total flux cleaned = 0.00111775 Jy
! Component: 150  -  total flux cleaned = 0.00119057 Jy
! Component: 200  -  total flux cleaned = 0.00128382 Jy
! Total flux subtracted in 200 components = 0.00128382 Jy
! Clean residual min=-0.003375 max=0.003385 Jy/beam
! Clean residual mean=0.000014 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.118698 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.2769e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100895 Jy
! Component: 150  -  total flux cleaned = 0.000100736 Jy
! Component: 200  -  total flux cleaned = 0.000121517 Jy
! Total flux subtracted in 200 components = 0.000121517 Jy
! Clean residual min=-0.003355 max=0.003269 Jy/beam
! Clean residual mean=0.000013 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.11882 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 61 components and 0.11882 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.813 mas, bmaj=6.76 mas, bpa=-3.093 degrees
! Estimated noise=0.577737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.79153e-05 Jy
! Component: 100  -  total flux cleaned = 8.34723e-05 Jy
! Component: 150  -  total flux cleaned = 0.000143371 Jy
! Component: 200  -  total flux cleaned = 0.000170964 Jy
! Total flux subtracted in 200 components = 0.000170964 Jy
! Clean residual min=-0.003117 max=0.003213 Jy/beam
! Clean residual mean=0.000005 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.118991 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.118991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060842Jy  sigma=1.209373
! Fit after  self-cal, rms=0.060830Jy  sigma=1.209127
wmodel /J0617-1715_S_map.mod
! wmodel: Unable to open new model file: /J0617-1715_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0617-1715_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.813 x 6.76 at -3.093 degrees (North through East)
! Clean map  min=-0.0029642  max=0.095877 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0617-1715_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0958768 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000703322 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.20071 2.20071 4.40141 8.80283 17.6057 35.2113 70.4226
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.095 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  136.319 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0617-1715_S_dfm.log closed on Thu May 19 23:54:25 2016