! Started logfile: /scr/pima/bg219a_uvs/J0611-1155_S_dfm.log on Thu May 19 23:54:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0611-1155_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0611-1155_S_uva.fits
! AN table 1: 57 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.836257 visibilities/baseline/integration-bin.
! Found source: J0611-1155
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2860 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0611-1155_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027221Jy  sigma=22.428376
! Fit after  self-cal, rms=0.823315Jy  sigma=17.680532
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.208 mas, bmaj=6.005 mas, bpa=-2.528 degrees
! Estimated noise=0.926509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13114 Jy
! Component: 100  -  total flux cleaned = 0.175246 Jy
! Total flux subtracted in 100 components = 0.175246 Jy
! Clean residual min=-0.014758 max=0.020858 Jy/beam
! Clean residual mean=0.000049 rms=0.004040 Jy/beam
! Combined flux in latest and established models = 0.175246 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.175246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075231Jy  sigma=1.617856
! Fit after  self-cal, rms=0.075236Jy  sigma=1.616679
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.683 mas, bmaj=6.695 mas, bpa=-3.366 degrees
! Estimated noise=0.623948 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327638 Jy
! Component: 100  -  total flux cleaned = 0.049726 Jy
! Component: 150  -  total flux cleaned = 0.0592799 Jy
! Component: 200  -  total flux cleaned = 0.0647648 Jy
! Total flux subtracted in 200 components = 0.0647648 Jy
! Clean residual min=-0.007752 max=0.011412 Jy/beam
! Clean residual mean=0.000028 rms=0.002541 Jy/beam
! Combined flux in latest and established models = 0.240011 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 35 components and 0.240011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061599Jy  sigma=1.258198
! Fit after  self-cal, rms=0.061564Jy  sigma=1.256142
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.683 x 6.695 at -3.366 degrees (North through East)
! Clean map  min=-0.0073747  max=0.18066 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        1.00     OV        1.06     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        0.99     OV        1.03     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        0.98     OV        1.02     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.03     NL        0.96     OV        1.05     
!   PT        0.98     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.061564Jy  sigma=1.256142
! Fit after  self-cal, rms=0.061696Jy  sigma=1.242412
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.722 mas, bmaj=6.756 mas, bpa=-3.471 degrees
! Estimated noise=0.623423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104853 Jy
! Component: 100  -  total flux cleaned = 0.0160619 Jy
! Component: 150  -  total flux cleaned = 0.0195181 Jy
! Component: 200  -  total flux cleaned = 0.02188 Jy
! Total flux subtracted in 200 components = 0.02188 Jy
! Clean residual min=-0.004561 max=0.003897 Jy/beam
! Clean residual mean=0.000002 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.261891 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 68 components and 0.261891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059983Jy  sigma=1.197724
! Fit after  self-cal, rms=0.059851Jy  sigma=1.194129
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059851Jy  sigma=1.194129
! Fit after  self-cal, rms=0.058954Jy  sigma=1.189689
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.717 mas, bmaj=6.728 mas, bpa=-3.372 degrees
! Estimated noise=0.617486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270925 Jy
! Component: 100  -  total flux cleaned = 0.004406 Jy
! Component: 150  -  total flux cleaned = 0.00526731 Jy
! Component: 200  -  total flux cleaned = 0.0057265 Jy
! Total flux subtracted in 200 components = 0.0057265 Jy
! Clean residual min=-0.002961 max=0.002942 Jy/beam
! Clean residual mean=-0.000000 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.267618 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.267618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058805Jy  sigma=1.186406
! Fit after  self-cal, rms=0.058796Jy  sigma=1.186229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000890994 Jy
! Component: 100  -  total flux cleaned = 0.00112545 Jy
! Component: 150  -  total flux cleaned = 0.00128545 Jy
! Component: 200  -  total flux cleaned = 0.00143214 Jy
! Total flux subtracted in 200 components = 0.00143214 Jy
! Clean residual min=-0.002902 max=0.002910 Jy/beam
! Clean residual mean=-0.000001 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.26905 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 90 components and 0.26905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058767Jy  sigma=1.185716
! Fit after  self-cal, rms=0.058768Jy  sigma=1.185699
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058768Jy  sigma=1.185699
! Fit after  self-cal, rms=0.058731Jy  sigma=1.185179
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.716 mas, bmaj=6.73 mas, bpa=-3.413 degrees
! Estimated noise=0.616559 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000816315 Jy
! Component: 100  -  total flux cleaned = 0.00109308 Jy
! Component: 150  -  total flux cleaned = 0.0012123 Jy
! Component: 200  -  total flux cleaned = 0.00129869 Jy
! Total flux subtracted in 200 components = 0.00129869 Jy
! Clean residual min=-0.002714 max=0.002592 Jy/beam
! Clean residual mean=-0.000000 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.270348 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 97 components and 0.270348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058704Jy  sigma=1.184690
! Fit after  self-cal, rms=0.058706Jy  sigma=1.184666
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000186631 Jy
! Component: 100  -  total flux cleaned = 0.000205194 Jy
! Component: 150  -  total flux cleaned = 0.000277086 Jy
! Component: 200  -  total flux cleaned = 0.000310776 Jy
! Total flux subtracted in 200 components = 0.000310776 Jy
! Clean residual min=-0.002695 max=0.002557 Jy/beam
! Clean residual mean=-0.000000 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.270659 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 103 components and 0.270659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058692Jy  sigma=1.184483
! Fit after  self-cal, rms=0.058693Jy  sigma=1.184473
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058693Jy  sigma=1.184473
! Fit after  self-cal, rms=0.058717Jy  sigma=1.184379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.12 mas, bmaj=15.11 mas, bpa=-1.802 degrees
! Estimated noise=0.850409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045184 Jy
! Component: 100  -  total flux cleaned = 0.000563811 Jy
! Component: 150  -  total flux cleaned = 0.000602483 Jy
! Component: 200  -  total flux cleaned = 0.000631114 Jy
! Total flux subtracted in 200 components = 0.000631114 Jy
! Clean residual min=-0.002962 max=0.003045 Jy/beam
! Clean residual mean=-0.000000 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.27129 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 103 components and 0.27129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058715Jy  sigma=1.184337
! Fit after  self-cal, rms=0.058714Jy  sigma=1.184320
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.64607e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112216 Jy
! Component: 150  -  total flux cleaned = 0.000131886 Jy
! Component: 200  -  total flux cleaned = 0.000143985 Jy
! Total flux subtracted in 200 components = 0.000143985 Jy
! Clean residual min=-0.002918 max=0.003049 Jy/beam
! Clean residual mean=-0.000000 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.271434 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 105 components and 0.271434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058713Jy  sigma=1.184299
! Fit after  self-cal, rms=0.058712Jy  sigma=1.184290
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.714 mas, bmaj=6.734 mas, bpa=-3.444 degrees
! Estimated noise=0.616223 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.714 x 6.734 at -3.444 degrees (North through East)
! Clean map  min=-0.0026366  max=0.18035 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=6.015 mas, bpa=-2.649 degrees
! Estimated noise=0.924258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130386 Jy
! Component: 100  -  total flux cleaned = 0.173823 Jy
! Component: 150  -  total flux cleaned = 0.196794 Jy
! Component: 200  -  total flux cleaned = 0.210278 Jy
! Total flux subtracted in 200 components = 0.210278 Jy
! Clean residual min=-0.008048 max=0.009810 Jy/beam
! Clean residual mean=0.000024 rms=0.002155 Jy/beam
! Combined flux in latest and established models = 0.210278 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.210278 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.714 mas, bmaj=6.734 mas, bpa=-3.444 degrees
! Estimated noise=0.616223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014404 Jy
! Component: 100  -  total flux cleaned = 0.0242647 Jy
! Component: 150  -  total flux cleaned = 0.0315772 Jy
! Component: 200  -  total flux cleaned = 0.0372736 Jy
! Total flux subtracted in 200 components = 0.0372736 Jy
! Clean residual min=-0.005000 max=0.005022 Jy/beam
! Clean residual mean=0.000021 rms=0.001413 Jy/beam
! Combined flux in latest and established models = 0.247552 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 60 components and 0.247552 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.12 mas, bmaj=15.11 mas, bpa=-1.802 degrees
! Estimated noise=0.850409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00867713 Jy
! Component: 100  -  total flux cleaned = 0.0136328 Jy
! Component: 150  -  total flux cleaned = 0.0168574 Jy
! Component: 200  -  total flux cleaned = 0.0190066 Jy
! Total flux subtracted in 200 components = 0.0190066 Jy
! Clean residual min=-0.003496 max=0.002779 Jy/beam
! Clean residual mean=0.000010 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.266558 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144689 Jy
! Component: 100  -  total flux cleaned = 0.00242837 Jy
! Component: 150  -  total flux cleaned = 0.00307429 Jy
! Component: 200  -  total flux cleaned = 0.00324459 Jy
! Total flux subtracted in 200 components = 0.00324459 Jy
! Clean residual min=-0.003034 max=0.003045 Jy/beam
! Clean residual mean=0.000003 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.269803 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 124 components and 0.269803 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.714 mas, bmaj=6.734 mas, bpa=-3.444 degrees
! Estimated noise=0.616223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000459619 Jy
! Component: 100  -  total flux cleaned = 0.000999583 Jy
! Component: 150  -  total flux cleaned = 0.00122547 Jy
! Component: 200  -  total flux cleaned = 0.00134101 Jy
! Total flux subtracted in 200 components = 0.00134101 Jy
! Clean residual min=-0.002614 max=0.002602 Jy/beam
! Clean residual mean=0.000000 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.271144 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 132 components and 0.271144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058776Jy  sigma=1.185523
! Fit after  self-cal, rms=0.058766Jy  sigma=1.185376
wmodel /J0611-1155_S_map.mod
! wmodel: Unable to open new model file: /J0611-1155_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0611-1155_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.714 x 6.734 at -3.444 degrees (North through East)
! Clean map  min=-0.0025477  max=0.17999 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0611-1155_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.179993 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000678937 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.1316 1.1316 2.26321 4.52642 9.05283 18.1057 36.2113 72.4227
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.179 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  265.11 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0611-1155_S_dfm.log closed on Thu May 19 23:54:10 2016