! Started logfile: /scr/pima/bg219a_uvs/J0544+4541_S_dfm.log on Thu May 19 23:53:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0544+4541_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0544+4541_S_uva.fits
! AN table 1: 26 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0544+4541
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1560 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0544+4541_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009824Jy  sigma=24.818060
! Fit after  self-cal, rms=0.877278Jy  sigma=21.461230
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.635 mas, bmaj=17.58 mas, bpa=42.81 degrees
! Estimated noise=1.3358 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0949715 Jy
! Component: 100  -  total flux cleaned = 0.119201 Jy
! Total flux subtracted in 100 components = 0.119201 Jy
! Clean residual min=-0.012843 max=0.012716 Jy/beam
! Clean residual mean=-0.000218 rms=0.003834 Jy/beam
! Combined flux in latest and established models = 0.119201 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.119201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062143Jy  sigma=1.450271
! Fit after  self-cal, rms=0.062158Jy  sigma=1.449944
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=17.49 mas, bpa=42.23 degrees
! Estimated noise=0.772764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182833 Jy
! Component: 100  -  total flux cleaned = 0.0299155 Jy
! Component: 150  -  total flux cleaned = 0.0379736 Jy
! Component: 200  -  total flux cleaned = 0.0441034 Jy
! Total flux subtracted in 200 components = 0.0441034 Jy
! Clean residual min=-0.005456 max=0.005520 Jy/beam
! Clean residual mean=-0.000192 rms=0.001863 Jy/beam
! Combined flux in latest and established models = 0.163304 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 42 components and 0.163304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056193Jy  sigma=1.267529
! Fit after  self-cal, rms=0.056163Jy  sigma=1.264833
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.055 x 17.49 at 42.23 degrees (North through East)
! Clean map  min=-0.0050674  max=0.12701 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        1.00     OV        0.97     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.08     NL        1.00     OV        0.98     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.01     NL        0.99     OV        1.02     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        0.97     OV        1.00     
!   PT        0.93     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.056163Jy  sigma=1.264833
! Fit after  self-cal, rms=0.056197Jy  sigma=1.248913
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=17.47 mas, bpa=42.17 degrees
! Estimated noise=0.756337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00405683 Jy
! Component: 100  -  total flux cleaned = 0.00512265 Jy
! Component: 150  -  total flux cleaned = 0.00582065 Jy
! Component: 200  -  total flux cleaned = 0.00599961 Jy
! Total flux subtracted in 200 components = 0.00599961 Jy
! Clean residual min=-0.002401 max=0.002531 Jy/beam
! Clean residual mean=-0.000012 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.169304 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 71 components and 0.169304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055841Jy  sigma=1.236874
! Fit after  self-cal, rms=0.055863Jy  sigma=1.236416
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055863Jy  sigma=1.236416
! Fit after  self-cal, rms=0.056156Jy  sigma=1.236023
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.131 mas, bmaj=17.43 mas, bpa=42.14 degrees
! Estimated noise=0.755651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0007839 Jy
! Component: 100  -  total flux cleaned = 0.000885409 Jy
! Component: 150  -  total flux cleaned = 0.000939813 Jy
! Component: 200  -  total flux cleaned = 0.00101549 Jy
! Total flux subtracted in 200 components = 0.00101549 Jy
! Clean residual min=-0.002038 max=0.002824 Jy/beam
! Clean residual mean=0.000003 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.17032 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 0.17032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056115Jy  sigma=1.235032
! Fit after  self-cal, rms=0.056125Jy  sigma=1.234979
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (83, -112).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134406 Jy
! Component: 100  -  total flux cleaned = 0.00155037 Jy
! Component: 150  -  total flux cleaned = 0.00154655 Jy
! Component: 200  -  total flux cleaned = 0.00142318 Jy
! Total flux subtracted in 200 components = 0.00142318 Jy
! Clean residual min=-0.001977 max=0.001610 Jy/beam
! Clean residual mean=-0.000003 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.171743 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 130 components and 0.171743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055938Jy  sigma=1.231452
! Fit after  self-cal, rms=0.055914Jy  sigma=1.231187
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055914Jy  sigma=1.231187
! Fit after  self-cal, rms=0.056015Jy  sigma=1.230706
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.137 mas, bmaj=17.42 mas, bpa=42.13 degrees
! Estimated noise=0.754164 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000292067 Jy
! Component: 100  -  total flux cleaned = 0.000459484 Jy
! Component: 150  -  total flux cleaned = 0.000674467 Jy
! Component: 200  -  total flux cleaned = 0.000738126 Jy
! Total flux subtracted in 200 components = 0.000738126 Jy
! Clean residual min=-0.001737 max=0.001408 Jy/beam
! Clean residual mean=-0.000005 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.172481 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 152 components and 0.172481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055943Jy  sigma=1.229401
! Fit after  self-cal, rms=0.055937Jy  sigma=1.229333
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.24031e-05 Jy
! Component: 100  -  total flux cleaned = 8.22818e-05 Jy
! Component: 150  -  total flux cleaned = 8.26241e-05 Jy
! Component: 200  -  total flux cleaned = 0.000128894 Jy
! Total flux subtracted in 200 components = 0.000128894 Jy
! Clean residual min=-0.001786 max=0.001371 Jy/beam
! Clean residual mean=-0.000003 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.17261 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 167 components and 0.17261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055907Jy  sigma=1.228834
! Fit after  self-cal, rms=0.055904Jy  sigma=1.228819
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055904Jy  sigma=1.228819
! Fit after  self-cal, rms=0.055896Jy  sigma=1.228597
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.711 mas, bmaj=18.33 mas, bpa=33.43 degrees
! Estimated noise=0.856076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.10101e-07 Jy
! Component: 100  -  total flux cleaned = 0.000159916 Jy
! Component: 150  -  total flux cleaned = 0.000409749 Jy
! Component: 200  -  total flux cleaned = 0.000507516 Jy
! Total flux subtracted in 200 components = 0.000507516 Jy
! Clean residual min=-0.001552 max=0.000904 Jy/beam
! Clean residual mean=0.000002 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.173117 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 196 components and 0.173117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055885Jy  sigma=1.228346
! Fit after  self-cal, rms=0.055883Jy  sigma=1.228329
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012115 Jy
! Component: 100  -  total flux cleaned = 0.000193313 Jy
! Component: 150  -  total flux cleaned = 0.000261334 Jy
! Component: 200  -  total flux cleaned = 0.000250201 Jy
! Total flux subtracted in 200 components = 0.000250201 Jy
! Clean residual min=-0.001509 max=0.000866 Jy/beam
! Clean residual mean=0.000004 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.173367 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 214 components and 0.173367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055879Jy  sigma=1.228215
! Fit after  self-cal, rms=0.055879Jy  sigma=1.228210
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.138 mas, bmaj=17.42 mas, bpa=42.13 degrees
! Estimated noise=0.75268 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.138 x 17.42 at 42.13 degrees (North through East)
! Clean map  min=-0.0022864  max=0.12487 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.704 mas, bmaj=17.44 mas, bpa=42.76 degrees
! Estimated noise=1.32305 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0937567 Jy
! Component: 100  -  total flux cleaned = 0.116897 Jy
! Component: 150  -  total flux cleaned = 0.129412 Jy
! Component: 200  -  total flux cleaned = 0.137329 Jy
! Total flux subtracted in 200 components = 0.137329 Jy
! Clean residual min=-0.007040 max=0.007220 Jy/beam
! Clean residual mean=-0.000108 rms=0.002361 Jy/beam
! Combined flux in latest and established models = 0.137329 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.137329 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.138 mas, bmaj=17.42 mas, bpa=42.13 degrees
! Estimated noise=0.75268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00866831 Jy
! Component: 100  -  total flux cleaned = 0.0137166 Jy
! Component: 150  -  total flux cleaned = 0.0171589 Jy
! Component: 200  -  total flux cleaned = 0.0193227 Jy
! Total flux subtracted in 200 components = 0.0193227 Jy
! Clean residual min=-0.003427 max=0.003293 Jy/beam
! Clean residual mean=-0.000100 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.156651 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 56 components and 0.156651 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.711 mas, bmaj=18.33 mas, bpa=33.43 degrees
! Estimated noise=0.856076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380937 Jy
! Component: 100  -  total flux cleaned = 0.00592031 Jy
! Component: 150  -  total flux cleaned = 0.00717946 Jy
! Component: 200  -  total flux cleaned = 0.00766143 Jy
! Total flux subtracted in 200 components = 0.00766143 Jy
! Clean residual min=-0.002047 max=0.001756 Jy/beam
! Clean residual mean=-0.000042 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.164313 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000845945 Jy
! Component: 100  -  total flux cleaned = 0.00159311 Jy
! Component: 150  -  total flux cleaned = 0.00230414 Jy
! Component: 200  -  total flux cleaned = 0.00301166 Jy
! Total flux subtracted in 200 components = 0.00301166 Jy
! Clean residual min=-0.001634 max=0.001333 Jy/beam
! Clean residual mean=-0.000012 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.167324 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 134 components and 0.167324 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.138 mas, bmaj=17.42 mas, bpa=42.13 degrees
! Estimated noise=0.75268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000598477 Jy
! Component: 100  -  total flux cleaned = 0.000964185 Jy
! Component: 150  -  total flux cleaned = 0.00149613 Jy
! Component: 200  -  total flux cleaned = 0.00183001 Jy
! Total flux subtracted in 200 components = 0.00183001 Jy
! Clean residual min=-0.001726 max=0.001591 Jy/beam
! Clean residual mean=-0.000006 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.169154 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 161 components and 0.169154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056027Jy  sigma=1.230413
! Fit after  self-cal, rms=0.056024Jy  sigma=1.230190
wmodel /J0544+4541_S_map.mod
! wmodel: Unable to open new model file: /J0544+4541_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0544+4541_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.138 x 17.42 at 42.13 degrees (North through East)
! Clean map  min=-0.0023037  max=0.12538 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0544+4541_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.125375 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000473463 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13291 1.13291 2.26582 4.53163 9.06327 18.1265 36.2531 72.5062
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.125 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  264.805 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0544+4541_S_dfm.log closed on Thu May 19 23:53:55 2016