! Started logfile: /scr/pima/bg219a_uvs/J0523+4113_X_dfm.log on Thu May 19 23:53:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0523+4113_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0523+4113_X_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0523+4113
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0523+4113_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000950Jy  sigma=29.490594
! Fit after  self-cal, rms=0.922717Jy  sigma=26.961017
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7665 mas, bmaj=1.015 mas, bpa=37.7 degrees
! Estimated noise=0.695182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0539106 Jy
! Component: 100  -  total flux cleaned = 0.0718323 Jy
! Total flux subtracted in 100 components = 0.0718323 Jy
! Clean residual min=-0.009119 max=0.013196 Jy/beam
! Clean residual mean=-0.000027 rms=0.002518 Jy/beam
! Combined flux in latest and established models = 0.0718323 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0718323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058523Jy  sigma=1.635041
! Fit after  self-cal, rms=0.058023Jy  sigma=1.624501
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=1.235 mas, bpa=37.75 degrees
! Estimated noise=0.354379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020417 Jy
! Component: 100  -  total flux cleaned = 0.0304259 Jy
! Component: 150  -  total flux cleaned = 0.035858 Jy
! Component: 200  -  total flux cleaned = 0.0389285 Jy
! Total flux subtracted in 200 components = 0.0389285 Jy
! Clean residual min=-0.005071 max=0.009315 Jy/beam
! Clean residual mean=-0.000031 rms=0.001365 Jy/beam
! Combined flux in latest and established models = 0.110761 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 29 components and 0.110761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051824Jy  sigma=1.387439
! Fit after  self-cal, rms=0.051700Jy  sigma=1.381531
! Inverting map 
! Added new window around map position (1.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00762079 Jy
! Component: 100  -  total flux cleaned = 0.00831986 Jy
! Component: 150  -  total flux cleaned = 0.00887283 Jy
! Component: 200  -  total flux cleaned = 0.00923895 Jy
! Total flux subtracted in 200 components = 0.00923895 Jy
! Clean residual min=-0.003249 max=0.003967 Jy/beam
! Clean residual mean=-0.000009 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.12 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.12 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050497Jy  sigma=1.344911
! Fit after  self-cal, rms=0.050381Jy  sigma=1.339812
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.035 x 1.235 at 37.75 degrees (North through East)
! Clean map  min=-0.0027807  max=0.075436 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.96     NL        1.04     OV        1.01     
!   PT        0.99     SC        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.98     NL        1.04     OV        1.03     
!   PT        0.99     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.04     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.83     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        0.95     NL        1.00     OV        0.98     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.95     NL        1.06     OV        0.98     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.00     NL        0.97     OV        1.07     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.13     NL        0.96     OV        1.00     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.06     MK        0.92     NL        0.97     OV        1.06     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.97     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.96     NL        1.00     OV        1.06     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.03     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.050381Jy  sigma=1.339812
! Fit after  self-cal, rms=0.049479Jy  sigma=1.334182
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=1.236 mas, bpa=37.82 degrees
! Estimated noise=0.349388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000689584 Jy
! Component: 100  -  total flux cleaned = 0.000628434 Jy
! Component: 150  -  total flux cleaned = 0.000533702 Jy
! Component: 200  -  total flux cleaned = 0.000457563 Jy
! Total flux subtracted in 200 components = 0.000457563 Jy
! Clean residual min=-0.001951 max=0.001716 Jy/beam
! Clean residual mean=-0.000001 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.120457 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.120457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049341Jy  sigma=1.330054
! Fit after  self-cal, rms=0.049331Jy  sigma=1.329433
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049331Jy  sigma=1.329433
! Fit after  self-cal, rms=0.049526Jy  sigma=1.325488
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.225 mas, bpa=38.32 degrees
! Estimated noise=0.348426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184923 Jy
! Component: 100  -  total flux cleaned = 0.000128962 Jy
! Component: 150  -  total flux cleaned = 3.47064e-05 Jy
! Component: 200  -  total flux cleaned = -6.81075e-05 Jy
! Total flux subtracted in 200 components = -6.81075e-05 Jy
! Clean residual min=-0.001783 max=0.001730 Jy/beam
! Clean residual mean=-0.000002 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.120389 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.120389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049491Jy  sigma=1.324583
! Fit after  self-cal, rms=0.049505Jy  sigma=1.324304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111476 Jy
! Component: 100  -  total flux cleaned = -0.000109525 Jy
! Component: 150  -  total flux cleaned = -0.000142618 Jy
! Component: 200  -  total flux cleaned = -0.000142472 Jy
! Total flux subtracted in 200 components = -0.000142472 Jy
! Clean residual min=-0.001717 max=0.001697 Jy/beam
! Clean residual mean=-0.000002 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.120247 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 65 components and 0.120247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049489Jy  sigma=1.323889
! Fit after  self-cal, rms=0.049489Jy  sigma=1.323811
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049489Jy  sigma=1.323811
! Fit after  self-cal, rms=0.049441Jy  sigma=1.323688
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.219 mas, bpa=38.38 degrees
! Estimated noise=0.347236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000221235 Jy
! Component: 100  -  total flux cleaned = -0.000336608 Jy
! Component: 150  -  total flux cleaned = -0.000399185 Jy
! Component: 200  -  total flux cleaned = -0.000456009 Jy
! Total flux subtracted in 200 components = -0.000456009 Jy
! Clean residual min=-0.001632 max=0.001675 Jy/beam
! Clean residual mean=-0.000002 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.119791 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.119791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049426Jy  sigma=1.323316
! Fit after  self-cal, rms=0.049429Jy  sigma=1.323251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-41.6, -44).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138933 Jy
! Component: 100  -  total flux cleaned = 0.00191264 Jy
! Component: 150  -  total flux cleaned = 0.00209783 Jy
! Component: 200  -  total flux cleaned = 0.00217819 Jy
! Total flux subtracted in 200 components = 0.00217819 Jy
! Clean residual min=-0.001663 max=0.001455 Jy/beam
! Clean residual mean=-0.000004 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.121969 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.121969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049383Jy  sigma=1.321927
! Fit after  self-cal, rms=0.049386Jy  sigma=1.321777
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049386Jy  sigma=1.321777
! Fit after  self-cal, rms=0.049131Jy  sigma=1.321555
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.42 mas, bmaj=2.945 mas, bpa=28.1 degrees
! Estimated noise=0.438912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000514189 Jy
! Component: 100  -  total flux cleaned = 0.000515595 Jy
! Component: 150  -  total flux cleaned = 0.000490522 Jy
! Component: 200  -  total flux cleaned = 0.000434468 Jy
! Total flux subtracted in 200 components = 0.000434468 Jy
! Clean residual min=-0.001102 max=0.001136 Jy/beam
! Clean residual mean=-0.000005 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.122403 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 0.122403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049124Jy  sigma=1.321310
! Fit after  self-cal, rms=0.049120Jy  sigma=1.321240
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016951 Jy
! Component: 100  -  total flux cleaned = 0.000172211 Jy
! Component: 150  -  total flux cleaned = 0.000101162 Jy
! Component: 200  -  total flux cleaned = 2.66303e-05 Jy
! Total flux subtracted in 200 components = 2.66303e-05 Jy
! Clean residual min=-0.001097 max=0.001101 Jy/beam
! Clean residual mean=-0.000005 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.12243 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.12243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049118Jy  sigma=1.321157
! Fit after  self-cal, rms=0.049118Jy  sigma=1.321133
! Inverting map 
! Added new window around map position (51, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000646573 Jy
! Component: 100  -  total flux cleaned = 0.000801287 Jy
! Component: 150  -  total flux cleaned = 0.000886753 Jy
! Component: 200  -  total flux cleaned = 0.000957322 Jy
! Total flux subtracted in 200 components = 0.000957322 Jy
! Clean residual min=-0.000871 max=0.000869 Jy/beam
! Clean residual mean=-0.000000 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.123387 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 118 components and 0.123387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049083Jy  sigma=1.320295
! Fit after  self-cal, rms=0.049080Jy  sigma=1.320208
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.018 mas, bmaj=1.216 mas, bpa=38.44 degrees
! Estimated noise=0.345369 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.018 x 1.216 at 38.44 degrees (North through East)
! Clean map  min=-0.0032686  max=0.074453 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7559 mas, bmaj=1.002 mas, bpa=37.89 degrees
! Estimated noise=0.664193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0515936 Jy
! Component: 100  -  total flux cleaned = 0.07181 Jy
! Component: 150  -  total flux cleaned = 0.0853294 Jy
! Component: 200  -  total flux cleaned = 0.0947162 Jy
! Total flux subtracted in 200 components = 0.0947162 Jy
! Clean residual min=-0.005848 max=0.006225 Jy/beam
! Clean residual mean=-0.000013 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.0947162 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0947162 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.018 mas, bmaj=1.216 mas, bpa=38.44 degrees
! Estimated noise=0.345369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107426 Jy
! Component: 100  -  total flux cleaned = 0.016215 Jy
! Component: 150  -  total flux cleaned = 0.0193003 Jy
! Component: 200  -  total flux cleaned = 0.0210465 Jy
! Total flux subtracted in 200 components = 0.0210465 Jy
! Clean residual min=-0.001994 max=0.002082 Jy/beam
! Clean residual mean=-0.000012 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.115763 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 47 components and 0.115763 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.42 mas, bmaj=2.945 mas, bpa=28.1 degrees
! Estimated noise=0.438912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253987 Jy
! Component: 100  -  total flux cleaned = 0.00408899 Jy
! Component: 150  -  total flux cleaned = 0.00502072 Jy
! Component: 200  -  total flux cleaned = 0.00572782 Jy
! Total flux subtracted in 200 components = 0.00572782 Jy
! Clean residual min=-0.001202 max=0.001239 Jy/beam
! Clean residual mean=-0.000007 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.121491 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612198 Jy
! Component: 100  -  total flux cleaned = 0.000927512 Jy
! Component: 150  -  total flux cleaned = 0.00109423 Jy
! Component: 200  -  total flux cleaned = 0.0012263 Jy
! Total flux subtracted in 200 components = 0.0012263 Jy
! Clean residual min=-0.000974 max=0.001055 Jy/beam
! Clean residual mean=-0.000002 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.122717 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 84 components and 0.122717 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.018 mas, bmaj=1.216 mas, bpa=38.44 degrees
! Estimated noise=0.345369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019323 Jy
! Component: 100  -  total flux cleaned = -0.000230388 Jy
! Component: 150  -  total flux cleaned = -0.000162306 Jy
! Component: 200  -  total flux cleaned = -1.04954e-05 Jy
! Total flux subtracted in 200 components = -1.04954e-05 Jy
! Clean residual min=-0.001360 max=0.001311 Jy/beam
! Clean residual mean=-0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.122706 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 108 components and 0.122706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049066Jy  sigma=1.319850
! Fit after  self-cal, rms=0.049058Jy  sigma=1.319195
wmodel /J0523+4113_X_map.mod
! wmodel: Unable to open new model file: /J0523+4113_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0523+4113_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.018 x 1.216 at 38.44 degrees (North through East)
! Clean map  min=-0.0015462  max=0.075526 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0523+4113_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.075526 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000292945 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.16362 1.16362 2.32724 4.65448 9.30896 18.6179 37.2358 74.4716
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  257.816 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0523+4113_X_dfm.log closed on Thu May 19 23:53:23 2016