! Started logfile: /scr/pima/bg219a_uvs/J0523+4113_S_dfm.log on Thu May 19 23:53:18 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0523+4113_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0523+4113_S_uva.fits ! AN table 1: 36 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.833333 visibilities/baseline/integration-bin. ! Found source: J0523+4113 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1800 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0523+4113_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.015317Jy sigma=26.401819 ! Fit after self-cal, rms=0.820392Jy sigma=21.206178 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=3.816 mas, bpa=36.38 degrees ! Estimated noise=1.1192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137271 Jy ! Component: 100 - total flux cleaned = 0.169709 Jy ! Total flux subtracted in 100 components = 0.169709 Jy ! Clean residual min=-0.008994 max=0.012238 Jy/beam ! Clean residual mean=0.000012 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 0.169709 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.169709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054942Jy sigma=1.355369 ! Fit after self-cal, rms=0.054968Jy sigma=1.355207 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.93 mas, bmaj=4.549 mas, bpa=33.53 degrees ! Estimated noise=0.692041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173451 Jy ! Component: 100 - total flux cleaned = 0.0254929 Jy ! Component: 150 - total flux cleaned = 0.0298297 Jy ! Component: 200 - total flux cleaned = 0.0312867 Jy ! Total flux subtracted in 200 components = 0.0312867 Jy ! Clean residual min=-0.005399 max=0.008696 Jy/beam ! Clean residual mean=0.000010 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.200996 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.200996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049913Jy sigma=1.209839 ! Fit after self-cal, rms=0.049940Jy sigma=1.208422 ! Inverting map ! Added new window around map position (9, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724416 Jy ! Component: 100 - total flux cleaned = 0.0105594 Jy ! Component: 150 - total flux cleaned = 0.0114534 Jy ! Component: 200 - total flux cleaned = 0.011868 Jy ! Total flux subtracted in 200 components = 0.011868 Jy ! Clean residual min=-0.003829 max=0.003442 Jy/beam ! Clean residual mean=0.000006 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.212864 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.212864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048823Jy sigma=1.181126 ! Fit after self-cal, rms=0.048785Jy sigma=1.179572 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.93 x 4.549 at 33.53 degrees (North through East) ! Clean map min=-0.0034205 max=0.18072 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 1.00 NL 1.00 OV 1.01 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.97 MK 1.00 NL 1.01 OV 1.01 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 1.00 NL 0.99 OV 0.99 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 1.00 NL 0.99 OV 0.99 ! PT 0.98 SC 0.98 ! ! ! Fit before self-cal, rms=0.048785Jy sigma=1.179572 ! Fit after self-cal, rms=0.048283Jy sigma=1.175690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=4.559 mas, bpa=33.94 degrees ! Estimated noise=0.687996 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662555 Jy ! Component: 100 - total flux cleaned = 0.00119624 Jy ! Component: 150 - total flux cleaned = 0.0014545 Jy ! Component: 200 - total flux cleaned = 0.00163934 Jy ! Total flux subtracted in 200 components = 0.00163934 Jy ! Clean residual min=-0.002938 max=0.002984 Jy/beam ! Clean residual mean=0.000005 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.214503 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.214503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048152Jy sigma=1.172926 ! Fit after self-cal, rms=0.048152Jy sigma=1.172551 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048152Jy sigma=1.172551 ! Fit after self-cal, rms=0.047940Jy sigma=1.167228 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.542 mas, bpa=34.17 degrees ! Estimated noise=0.687139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548998 Jy ! Component: 100 - total flux cleaned = 0.000651104 Jy ! Component: 150 - total flux cleaned = 0.000766564 Jy ! Component: 200 - total flux cleaned = 0.000840148 Jy ! Total flux subtracted in 200 components = 0.000840148 Jy ! Clean residual min=-0.002485 max=0.002393 Jy/beam ! Clean residual mean=0.000002 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.215343 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.215343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047889Jy sigma=1.166289 ! Fit after self-cal, rms=0.047896Jy sigma=1.166201 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262526 Jy ! Component: 100 - total flux cleaned = 0.000323627 Jy ! Component: 150 - total flux cleaned = 0.00034169 Jy ! Component: 200 - total flux cleaned = 0.000358616 Jy ! Total flux subtracted in 200 components = 0.000358616 Jy ! Clean residual min=-0.002428 max=0.002386 Jy/beam ! Clean residual mean=0.000001 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.215702 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.215702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047877Jy sigma=1.165898 ! Fit after self-cal, rms=0.047880Jy sigma=1.165868 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047880Jy sigma=1.165868 ! Fit after self-cal, rms=0.047812Jy sigma=1.165716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.535 mas, bpa=34.21 degrees ! Estimated noise=0.68621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335346 Jy ! Component: 100 - total flux cleaned = 0.000375261 Jy ! Component: 150 - total flux cleaned = 0.000392365 Jy ! Component: 200 - total flux cleaned = 0.000377384 Jy ! Total flux subtracted in 200 components = 0.000377384 Jy ! Clean residual min=-0.002390 max=0.002412 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.216079 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.216079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047796Jy sigma=1.165418 ! Fit after self-cal, rms=0.047798Jy sigma=1.165391 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.00286e-05 Jy ! Component: 100 - total flux cleaned = 4.98601e-05 Jy ! Component: 150 - total flux cleaned = 3.78286e-05 Jy ! Component: 200 - total flux cleaned = 4.93346e-05 Jy ! Total flux subtracted in 200 components = 4.93346e-05 Jy ! Clean residual min=-0.002404 max=0.002401 Jy/beam ! Clean residual mean=0.000000 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.216128 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.216128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047789Jy sigma=1.165261 ! Fit after self-cal, rms=0.047792Jy sigma=1.165239 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047792Jy sigma=1.165239 ! Fit after self-cal, rms=0.047767Jy sigma=1.165170 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=10.57 mas, bpa=25.86 degrees ! Estimated noise=0.865129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132649 Jy ! Component: 100 - total flux cleaned = 0.000130474 Jy ! Component: 150 - total flux cleaned = 9.62567e-05 Jy ! Component: 200 - total flux cleaned = 4.54544e-05 Jy ! Total flux subtracted in 200 components = 4.54544e-05 Jy ! Clean residual min=-0.002184 max=0.002578 Jy/beam ! Clean residual mean=-0.000000 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.216174 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.216174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047760Jy sigma=1.165144 ! Fit after self-cal, rms=0.047763Jy sigma=1.165109 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07878e-05 Jy ! Component: 100 - total flux cleaned = -4.22869e-05 Jy ! Component: 150 - total flux cleaned = -7.848e-05 Jy ! Component: 200 - total flux cleaned = -0.000109393 Jy ! Total flux subtracted in 200 components = -0.000109393 Jy ! Clean residual min=-0.002162 max=0.002566 Jy/beam ! Clean residual mean=-0.000000 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.216065 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 0.216065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047758Jy sigma=1.165092 ! Fit after self-cal, rms=0.047761Jy sigma=1.165065 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.531 mas, bpa=34.26 degrees ! Estimated noise=0.685752 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 4.531 at 34.26 degrees (North through East) ! Clean map min=-0.0023167 max=0.17998 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=3.821 mas, bpa=36.77 degrees ! Estimated noise=1.10289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135193 Jy ! Component: 100 - total flux cleaned = 0.167647 Jy ! Component: 150 - total flux cleaned = 0.181601 Jy ! Component: 200 - total flux cleaned = 0.19054 Jy ! Total flux subtracted in 200 components = 0.19054 Jy ! Clean residual min=-0.005575 max=0.005617 Jy/beam ! Clean residual mean=0.000007 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.19054 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.19054 Jy ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.531 mas, bpa=34.26 degrees ! Estimated noise=0.685752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870405 Jy ! Component: 100 - total flux cleaned = 0.0141141 Jy ! Component: 150 - total flux cleaned = 0.0176845 Jy ! Component: 200 - total flux cleaned = 0.0200741 Jy ! Total flux subtracted in 200 components = 0.0200741 Jy ! Clean residual min=-0.003070 max=0.002661 Jy/beam ! Clean residual mean=0.000003 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.210614 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.210614 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=10.57 mas, bpa=25.86 degrees ! Estimated noise=0.865129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236787 Jy ! Component: 100 - total flux cleaned = 0.0035457 Jy ! Component: 150 - total flux cleaned = 0.00420468 Jy ! Component: 200 - total flux cleaned = 0.00443554 Jy ! Total flux subtracted in 200 components = 0.00443554 Jy ! Clean residual min=-0.002336 max=0.002534 Jy/beam ! Clean residual mean=0.000001 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.215049 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102234 Jy ! Component: 100 - total flux cleaned = 0.000192591 Jy ! Component: 150 - total flux cleaned = 0.000271861 Jy ! Component: 200 - total flux cleaned = 0.000332752 Jy ! Total flux subtracted in 200 components = 0.000332752 Jy ! Clean residual min=-0.002241 max=0.002579 Jy/beam ! Clean residual mean=0.000001 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.215382 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 84 components and 0.215382 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.531 mas, bpa=34.26 degrees ! Estimated noise=0.685752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.11632e-05 Jy ! Component: 100 - total flux cleaned = 1.14214e-05 Jy ! Component: 150 - total flux cleaned = 6.17446e-05 Jy ! Component: 200 - total flux cleaned = 8.51838e-05 Jy ! Total flux subtracted in 200 components = 8.51838e-05 Jy ! Clean residual min=-0.002648 max=0.002479 Jy/beam ! Clean residual mean=0.000001 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.215467 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.215467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047810Jy sigma=1.166194 ! Fit after self-cal, rms=0.047810Jy sigma=1.166044 wmodel /J0523+4113_S_map.mod ! wmodel: Unable to open new model file: /J0523+4113_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0523+4113_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 4.531 at 34.26 degrees (North through East) ! Clean map min=-0.0024719 max=0.17932 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0523+4113_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.179323 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000604899 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01197 1.01197 2.02395 4.0479 8.09579 16.1916 32.3832 64.7663 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.179 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 296.45 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0523+4113_S_dfm.log closed on Thu May 19 23:53:20 2016