! Started logfile: /scr/pima/bg219a_uvs/J0511+2631_S_uvs.log on Wed Apr 6 22:45:31 2016 obs /scr/pima/bg219a_uvs/J0511+2631_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0511+2631_S_uva.fits ! AN table 1: 48 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.7 visibilities/baseline/integration-bin. ! Found source: J0511+2631 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2016 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0511+2631_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.019365Jy sigma=26.313284 ! Fit after self-cal, rms=0.871363Jy sigma=22.464071 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=5.019 mas, bpa=8.663 degrees ! Estimated noise=0.920386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100312 Jy ! Component: 100 - total flux cleaned = 0.139569 Jy ! Total flux subtracted in 100 components = 0.139569 Jy ! Clean residual min=-0.010085 max=0.018005 Jy/beam ! Clean residual mean=-0.000009 rms=0.003890 Jy/beam ! Combined flux in latest and established models = 0.139569 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.139569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061461Jy sigma=1.563492 ! Fit after self-cal, rms=0.060680Jy sigma=1.539659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=5.462 mas, bpa=3.646 degrees ! Estimated noise=0.617794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244107 Jy ! Component: 100 - total flux cleaned = 0.0360694 Jy ! Component: 150 - total flux cleaned = 0.043033 Jy ! Component: 200 - total flux cleaned = 0.0474057 Jy ! Total flux subtracted in 200 components = 0.0474057 Jy ! Clean residual min=-0.005688 max=0.007261 Jy/beam ! Clean residual mean=-0.000008 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.186974 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.186974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051502Jy sigma=1.254779 ! Fit after self-cal, rms=0.051412Jy sigma=1.251411 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.298 x 5.462 at 3.646 degrees (North through East) ! Clean map min=-0.0055343 max=0.12477 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.03 NL 0.96 OV 0.98 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 1.06 NL 1.00 OV 0.98 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 0.97 MK 1.04 NL 0.96 OV 1.00 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 1.04 NL 0.99 OV 0.87 ! PT 1.02 SC 0.88 ! ! ! Fit before self-cal, rms=0.051412Jy sigma=1.251411 ! Fit after self-cal, rms=0.050763Jy sigma=1.236652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=5.514 mas, bpa=4.411 degrees ! Estimated noise=0.612372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325523 Jy ! Component: 100 - total flux cleaned = -0.000378531 Jy ! Component: 150 - total flux cleaned = -0.000287503 Jy ! Component: 200 - total flux cleaned = -0.000246914 Jy ! Total flux subtracted in 200 components = -0.000246914 Jy ! Clean residual min=-0.004795 max=0.005850 Jy/beam ! Clean residual mean=-0.000005 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.186728 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.186727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050664Jy sigma=1.234155 ! Fit after self-cal, rms=0.050665Jy sigma=1.233626 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050665Jy sigma=1.233626 ! Fit after self-cal, rms=0.050733Jy sigma=1.218851 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=5.624 mas, bpa=5.825 degrees ! Estimated noise=0.615107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.0802e-05 Jy ! Component: 100 - total flux cleaned = 4.89431e-05 Jy ! Component: 150 - total flux cleaned = 8.81925e-05 Jy ! Component: 200 - total flux cleaned = 0.000157444 Jy ! Total flux subtracted in 200 components = 0.000157444 Jy ! Clean residual min=-0.003489 max=0.004259 Jy/beam ! Clean residual mean=-0.000002 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.186885 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.186885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050631Jy sigma=1.216763 ! Fit after self-cal, rms=0.050651Jy sigma=1.216306 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.5, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372435 Jy ! Component: 100 - total flux cleaned = 0.00405215 Jy ! Component: 150 - total flux cleaned = 0.00416544 Jy ! Component: 200 - total flux cleaned = 0.00431052 Jy ! Total flux subtracted in 200 components = 0.00431052 Jy ! Clean residual min=-0.002904 max=0.002998 Jy/beam ! Clean residual mean=-0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.191195 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.191195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050343Jy sigma=1.209032 ! Fit after self-cal, rms=0.050291Jy sigma=1.207973 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050291Jy sigma=1.207973 ! Fit after self-cal, rms=0.049552Jy sigma=1.203948 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=5.581 mas, bpa=5.554 degrees ! Estimated noise=0.609711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171405 Jy ! Component: 100 - total flux cleaned = 0.00193848 Jy ! Component: 150 - total flux cleaned = 0.00198151 Jy ! Component: 200 - total flux cleaned = 0.00195204 Jy ! Total flux subtracted in 200 components = 0.00195204 Jy ! Clean residual min=-0.002598 max=0.002563 Jy/beam ! Clean residual mean=-0.000000 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.193147 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.193147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049466Jy sigma=1.201930 ! Fit after self-cal, rms=0.049449Jy sigma=1.201619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338706 Jy ! Component: 100 - total flux cleaned = 0.000366082 Jy ! Component: 150 - total flux cleaned = 0.000365317 Jy ! Component: 200 - total flux cleaned = 0.000301405 Jy ! Total flux subtracted in 200 components = 0.000301405 Jy ! Clean residual min=-0.002550 max=0.002375 Jy/beam ! Clean residual mean=-0.000000 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.193449 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.193449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049420Jy sigma=1.200972 ! Fit after self-cal, rms=0.049416Jy sigma=1.200904 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049416Jy sigma=1.200904 ! Fit after self-cal, rms=0.049221Jy sigma=1.200668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.234 mas, bmaj=12.98 mas, bpa=-1.061 degrees ! Estimated noise=0.79012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637497 Jy ! Component: 100 - total flux cleaned = 0.000877555 Jy ! Component: 150 - total flux cleaned = 0.000964558 Jy ! Component: 200 - total flux cleaned = 0.00103353 Jy ! Total flux subtracted in 200 components = 0.00103353 Jy ! Clean residual min=-0.001489 max=0.001810 Jy/beam ! Clean residual mean=-0.000000 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.194482 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.194482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049220Jy sigma=1.200579 ! Fit after self-cal, rms=0.049217Jy sigma=1.200520 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170894 Jy ! Component: 100 - total flux cleaned = 0.000211669 Jy ! Component: 150 - total flux cleaned = 0.000251586 Jy ! Component: 200 - total flux cleaned = 0.000251996 Jy ! Total flux subtracted in 200 components = 0.000251996 Jy ! Clean residual min=-0.001500 max=0.001827 Jy/beam ! Clean residual mean=0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.194734 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.194734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049219Jy sigma=1.200546 ! Fit after self-cal, rms=0.049219Jy sigma=1.200525 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=5.579 mas, bpa=5.589 degrees ! Estimated noise=0.608855 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 5.579 at 5.589 degrees (North through East) ! Clean map min=-0.002303 max=0.12255 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=5.211 mas, bpa=10.58 degrees ! Estimated noise=0.900125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0979407 Jy ! Component: 100 - total flux cleaned = 0.136232 Jy ! Component: 150 - total flux cleaned = 0.153859 Jy ! Component: 200 - total flux cleaned = 0.163266 Jy ! Total flux subtracted in 200 components = 0.163266 Jy ! Clean residual min=-0.005793 max=0.005839 Jy/beam ! Clean residual mean=-0.000001 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.163266 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.163266 Jy ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=5.579 mas, bpa=5.589 degrees ! Estimated noise=0.608855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102784 Jy ! Component: 100 - total flux cleaned = 0.0167185 Jy ! Component: 150 - total flux cleaned = 0.0212642 Jy ! Component: 200 - total flux cleaned = 0.024512 Jy ! Total flux subtracted in 200 components = 0.024512 Jy ! Clean residual min=-0.003842 max=0.002673 Jy/beam ! Clean residual mean=-0.000007 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.187778 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 45 components and 0.187778 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.234 mas, bmaj=12.98 mas, bpa=-1.061 degrees ! Estimated noise=0.79012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322642 Jy ! Component: 100 - total flux cleaned = 0.00454661 Jy ! Component: 150 - total flux cleaned = 0.00488367 Jy ! Component: 200 - total flux cleaned = 0.0051424 Jy ! Total flux subtracted in 200 components = 0.0051424 Jy ! Clean residual min=-0.002040 max=0.002089 Jy/beam ! Clean residual mean=-0.000006 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.192921 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210908 Jy ! Component: 100 - total flux cleaned = 0.000405438 Jy ! Component: 150 - total flux cleaned = 0.000548107 Jy ! Component: 200 - total flux cleaned = 0.000639673 Jy ! Total flux subtracted in 200 components = 0.000639673 Jy ! Clean residual min=-0.001741 max=0.002031 Jy/beam ! Clean residual mean=-0.000004 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.19356 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 65 components and 0.19356 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=5.579 mas, bpa=5.589 degrees ! Estimated noise=0.608855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202583 Jy ! Component: 100 - total flux cleaned = -0.00025582 Jy ! Component: 150 - total flux cleaned = -0.000257199 Jy ! Component: 200 - total flux cleaned = -0.000226064 Jy ! Total flux subtracted in 200 components = -0.000226064 Jy ! Clean residual min=-0.002453 max=0.002211 Jy/beam ! Clean residual mean=-0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.193334 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.193334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049235Jy sigma=1.200625 ! Fit after self-cal, rms=0.049228Jy sigma=1.200494 wmodel /scr/pima/bg219a_uvs/J0511+2631_S_map.mod ! Writing 86 model components to file: /scr/pima/bg219a_uvs/J0511+2631_S_map.mod wobs /scr/pima/bg219a_uvs/J0511+2631_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J0511+2631_S_uvs.fits wwins /scr/pima/bg219a_uvs/J0511+2631_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219a_uvs/J0511+2631_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055837 Jy ! Component: 100 - total flux cleaned = -0.000845923 Jy ! Component: 150 - total flux cleaned = -0.00101097 Jy ! Component: 200 - total flux cleaned = -0.000979923 Jy ! Component: 250 - total flux cleaned = -0.00106489 Jy ! Component: 300 - total flux cleaned = -0.00111952 Jy ! Component: 350 - total flux cleaned = -0.0011725 Jy ! Component: 400 - total flux cleaned = -0.00119838 Jy ! Component: 450 - total flux cleaned = -0.00124608 Jy ! Component: 500 - total flux cleaned = -0.00124613 Jy ! Component: 550 - total flux cleaned = -0.00120261 Jy ! Component: 600 - total flux cleaned = -0.00122443 Jy ! Component: 650 - total flux cleaned = -0.00110062 Jy ! Component: 700 - total flux cleaned = -0.0010608 Jy ! Component: 750 - total flux cleaned = -0.00102138 Jy ! Component: 800 - total flux cleaned = -0.000963791 Jy ! Component: 850 - total flux cleaned = -0.000926515 Jy ! Component: 900 - total flux cleaned = -0.000853114 Jy ! Component: 950 - total flux cleaned = -0.000799146 Jy ! Component: 1000 - total flux cleaned = -0.000764161 Jy ! Component: 1050 - total flux cleaned = -0.0007302 Jy ! Component: 1100 - total flux cleaned = -0.000747374 Jy ! Component: 1150 - total flux cleaned = -0.000780577 Jy ! Component: 1200 - total flux cleaned = -0.000780531 Jy ! Component: 1250 - total flux cleaned = -0.000813037 Jy ! Component: 1300 - total flux cleaned = -0.000860909 Jy ! Component: 1350 - total flux cleaned = -0.000986208 Jy ! Component: 1400 - total flux cleaned = -0.00101708 Jy ! Component: 1450 - total flux cleaned = -0.00104765 Jy ! Component: 1500 - total flux cleaned = -0.00104769 Jy ! Component: 1550 - total flux cleaned = -0.00103292 Jy ! Component: 1600 - total flux cleaned = -0.00107723 Jy ! Component: 1650 - total flux cleaned = -0.00110645 Jy ! Component: 1700 - total flux cleaned = -0.00109196 Jy ! Component: 1750 - total flux cleaned = -0.00114959 Jy ! Component: 1800 - total flux cleaned = -0.00117835 Jy ! Component: 1850 - total flux cleaned = -0.00127773 Jy ! Component: 1900 - total flux cleaned = -0.0013341 Jy ! Component: 1950 - total flux cleaned = -0.00137627 Jy ! Component: 2000 - total flux cleaned = -0.00143239 Jy ! Component: 2050 - total flux cleaned = -0.00152985 Jy ! Component: 2100 - total flux cleaned = -0.00157143 Jy ! Component: 2150 - total flux cleaned = -0.00164057 Jy ! Component: 2200 - total flux cleaned = -0.00169561 Jy ! Component: 2250 - total flux cleaned = -0.00176414 Jy ! Component: 2300 - total flux cleaned = -0.00177778 Jy ! Component: 2350 - total flux cleaned = -0.00180518 Jy ! Component: 2400 - total flux cleaned = -0.00187338 Jy ! Component: 2450 - total flux cleaned = -0.00190067 Jy ! Component: 2500 - total flux cleaned = -0.00194163 Jy ! Component: 2550 - total flux cleaned = -0.00196906 Jy ! Component: 2600 - total flux cleaned = -0.00198277 Jy ! Component: 2650 - total flux cleaned = -0.00199655 Jy ! Component: 2700 - total flux cleaned = -0.00199649 Jy ! Component: 2750 - total flux cleaned = -0.00198254 Jy ! Component: 2800 - total flux cleaned = -0.00199655 Jy ! Component: 2850 - total flux cleaned = -0.00199643 Jy ! Component: 2900 - total flux cleaned = -0.00198225 Jy ! Component: 2950 - total flux cleaned = -0.00199642 Jy ! Component: 3000 - total flux cleaned = -0.00198209 Jy ! Component: 3050 - total flux cleaned = -0.0019821 Jy ! Component: 3100 - total flux cleaned = -0.00196758 Jy ! Component: 3150 - total flux cleaned = -0.00195278 Jy ! Component: 3200 - total flux cleaned = -0.00195277 Jy ! Component: 3250 - total flux cleaned = -0.00195272 Jy ! Component: 3300 - total flux cleaned = -0.00193749 Jy ! Component: 3350 - total flux cleaned = -0.00192207 Jy ! Component: 3400 - total flux cleaned = -0.00190614 Jy ! Component: 3450 - total flux cleaned = -0.00190613 Jy ! Component: 3500 - total flux cleaned = -0.00187363 Jy ! Component: 3550 - total flux cleaned = -0.00187357 Jy ! Component: 3600 - total flux cleaned = -0.00185689 Jy ! Component: 3650 - total flux cleaned = -0.0018398 Jy ! Component: 3700 - total flux cleaned = -0.00182248 Jy ! Component: 3750 - total flux cleaned = -0.00180494 Jy ! Component: 3800 - total flux cleaned = -0.00180484 Jy ! Component: 3850 - total flux cleaned = -0.00178664 Jy ! Component: 3900 - total flux cleaned = -0.00180495 Jy ! Component: 3950 - total flux cleaned = -0.00180515 Jy ! Component: 4000 - total flux cleaned = -0.00180505 Jy ! Component: 4050 - total flux cleaned = -0.00182461 Jy ! Total flux subtracted in 4096 components = -0.00182467 Jy ! Clean residual min=-0.001235 max=0.001141 Jy/beam ! Clean residual mean=0.000003 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.19151 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 309 components and 0.19151 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J0511+2631_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 5.579 at 5.589 degrees (North through East) ! Clean map min=-0.0025463 max=0.12434 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0511+2631_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124343 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303383 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.731967 0.731967 1.46393 2.92787 5.85574 11.7115 23.4229 46.8459 93.6918 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.124 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 409.854 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0511+2631_S_uvs.log closed on Wed Apr 6 22:45:35 2016