! Started logfile: /scr/pima/bg219a_uvs/J0511+2631_S_dfm.log on Thu May 19 23:53:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0511+2631_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0511+2631_S_uva.fits
! AN table 1: 48 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J0511+2631
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0511+2631_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019365Jy  sigma=26.313284
! Fit after  self-cal, rms=0.871363Jy  sigma=22.464071
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.8 mas, bmaj=5.019 mas, bpa=8.663 degrees
! Estimated noise=0.920386 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100312 Jy
! Component: 100  -  total flux cleaned = 0.139569 Jy
! Total flux subtracted in 100 components = 0.139569 Jy
! Clean residual min=-0.010085 max=0.018005 Jy/beam
! Clean residual mean=-0.000009 rms=0.003890 Jy/beam
! Combined flux in latest and established models = 0.139569 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.139569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061461Jy  sigma=1.563492
! Fit after  self-cal, rms=0.060680Jy  sigma=1.539659
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.298 mas, bmaj=5.462 mas, bpa=3.646 degrees
! Estimated noise=0.617794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244107 Jy
! Component: 100  -  total flux cleaned = 0.0360694 Jy
! Component: 150  -  total flux cleaned = 0.043033 Jy
! Component: 200  -  total flux cleaned = 0.0474057 Jy
! Total flux subtracted in 200 components = 0.0474057 Jy
! Clean residual min=-0.005688 max=0.007261 Jy/beam
! Clean residual mean=-0.000008 rms=0.001623 Jy/beam
! Combined flux in latest and established models = 0.186974 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 36 components and 0.186974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051502Jy  sigma=1.254779
! Fit after  self-cal, rms=0.051412Jy  sigma=1.251411
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.298 x 5.462 at 3.646 degrees (North through East)
! Clean map  min=-0.0055343  max=0.12477 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        0.96     OV        0.98     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.06     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.04     NL        0.96     OV        1.00     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        0.99     OV        0.87     
!   PT        1.02     SC        0.88     
! 
! 
! Fit before self-cal, rms=0.051412Jy  sigma=1.251411
! Fit after  self-cal, rms=0.050763Jy  sigma=1.236652
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.326 mas, bmaj=5.514 mas, bpa=4.411 degrees
! Estimated noise=0.612372 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000325523 Jy
! Component: 100  -  total flux cleaned = -0.000378531 Jy
! Component: 150  -  total flux cleaned = -0.000287503 Jy
! Component: 200  -  total flux cleaned = -0.000246914 Jy
! Total flux subtracted in 200 components = -0.000246914 Jy
! Clean residual min=-0.004795 max=0.005850 Jy/beam
! Clean residual mean=-0.000005 rms=0.001411 Jy/beam
! Combined flux in latest and established models = 0.186728 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 40 components and 0.186727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050664Jy  sigma=1.234155
! Fit after  self-cal, rms=0.050665Jy  sigma=1.233626
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050665Jy  sigma=1.233626
! Fit after  self-cal, rms=0.050733Jy  sigma=1.218851
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.319 mas, bmaj=5.624 mas, bpa=5.825 degrees
! Estimated noise=0.615107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.0802e-05 Jy
! Component: 100  -  total flux cleaned = 4.89431e-05 Jy
! Component: 150  -  total flux cleaned = 8.81925e-05 Jy
! Component: 200  -  total flux cleaned = 0.000157444 Jy
! Total flux subtracted in 200 components = 0.000157444 Jy
! Clean residual min=-0.003489 max=0.004259 Jy/beam
! Clean residual mean=-0.000002 rms=0.000949 Jy/beam
! Combined flux in latest and established models = 0.186885 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.186885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050631Jy  sigma=1.216763
! Fit after  self-cal, rms=0.050651Jy  sigma=1.216306
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-29.5, 40).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372435 Jy
! Component: 100  -  total flux cleaned = 0.00405215 Jy
! Component: 150  -  total flux cleaned = 0.00416544 Jy
! Component: 200  -  total flux cleaned = 0.00431052 Jy
! Total flux subtracted in 200 components = 0.00431052 Jy
! Clean residual min=-0.002904 max=0.002998 Jy/beam
! Clean residual mean=-0.000001 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.191195 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 60 components and 0.191195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050343Jy  sigma=1.209032
! Fit after  self-cal, rms=0.050291Jy  sigma=1.207973
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050291Jy  sigma=1.207973
! Fit after  self-cal, rms=0.049552Jy  sigma=1.203948
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.301 mas, bmaj=5.581 mas, bpa=5.554 degrees
! Estimated noise=0.609711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171405 Jy
! Component: 100  -  total flux cleaned = 0.00193848 Jy
! Component: 150  -  total flux cleaned = 0.00198151 Jy
! Component: 200  -  total flux cleaned = 0.00195204 Jy
! Total flux subtracted in 200 components = 0.00195204 Jy
! Clean residual min=-0.002598 max=0.002563 Jy/beam
! Clean residual mean=-0.000000 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.193147 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.193147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049466Jy  sigma=1.201930
! Fit after  self-cal, rms=0.049449Jy  sigma=1.201619
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000338706 Jy
! Component: 100  -  total flux cleaned = 0.000366082 Jy
! Component: 150  -  total flux cleaned = 0.000365317 Jy
! Component: 200  -  total flux cleaned = 0.000301405 Jy
! Total flux subtracted in 200 components = 0.000301405 Jy
! Clean residual min=-0.002550 max=0.002375 Jy/beam
! Clean residual mean=-0.000000 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.193449 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.193449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049420Jy  sigma=1.200972
! Fit after  self-cal, rms=0.049416Jy  sigma=1.200904
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049416Jy  sigma=1.200904
! Fit after  self-cal, rms=0.049221Jy  sigma=1.200668
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.234 mas, bmaj=12.98 mas, bpa=-1.061 degrees
! Estimated noise=0.79012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000637497 Jy
! Component: 100  -  total flux cleaned = 0.000877555 Jy
! Component: 150  -  total flux cleaned = 0.000964558 Jy
! Component: 200  -  total flux cleaned = 0.00103353 Jy
! Total flux subtracted in 200 components = 0.00103353 Jy
! Clean residual min=-0.001489 max=0.001810 Jy/beam
! Clean residual mean=-0.000000 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.194482 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.194482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049220Jy  sigma=1.200579
! Fit after  self-cal, rms=0.049217Jy  sigma=1.200520
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170894 Jy
! Component: 100  -  total flux cleaned = 0.000211669 Jy
! Component: 150  -  total flux cleaned = 0.000251586 Jy
! Component: 200  -  total flux cleaned = 0.000251996 Jy
! Total flux subtracted in 200 components = 0.000251996 Jy
! Clean residual min=-0.001500 max=0.001827 Jy/beam
! Clean residual mean=0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.194734 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 100 components and 0.194734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049219Jy  sigma=1.200546
! Fit after  self-cal, rms=0.049219Jy  sigma=1.200525
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=5.579 mas, bpa=5.589 degrees
! Estimated noise=0.608855 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.294 x 5.579 at 5.589 degrees (North through East)
! Clean map  min=-0.002303  max=0.12255 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.795 mas, bmaj=5.211 mas, bpa=10.58 degrees
! Estimated noise=0.900125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0979407 Jy
! Component: 100  -  total flux cleaned = 0.136232 Jy
! Component: 150  -  total flux cleaned = 0.153859 Jy
! Component: 200  -  total flux cleaned = 0.163266 Jy
! Total flux subtracted in 200 components = 0.163266 Jy
! Clean residual min=-0.005793 max=0.005839 Jy/beam
! Clean residual mean=-0.000001 rms=0.001551 Jy/beam
! Combined flux in latest and established models = 0.163266 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.163266 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=5.579 mas, bpa=5.589 degrees
! Estimated noise=0.608855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102784 Jy
! Component: 100  -  total flux cleaned = 0.0167185 Jy
! Component: 150  -  total flux cleaned = 0.0212642 Jy
! Component: 200  -  total flux cleaned = 0.024512 Jy
! Total flux subtracted in 200 components = 0.024512 Jy
! Clean residual min=-0.003842 max=0.002673 Jy/beam
! Clean residual mean=-0.000007 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.187778 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 45 components and 0.187778 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.234 mas, bmaj=12.98 mas, bpa=-1.061 degrees
! Estimated noise=0.79012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322642 Jy
! Component: 100  -  total flux cleaned = 0.00454661 Jy
! Component: 150  -  total flux cleaned = 0.00488367 Jy
! Component: 200  -  total flux cleaned = 0.0051424 Jy
! Total flux subtracted in 200 components = 0.0051424 Jy
! Clean residual min=-0.002040 max=0.002089 Jy/beam
! Clean residual mean=-0.000006 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.192921 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000210908 Jy
! Component: 100  -  total flux cleaned = 0.000405438 Jy
! Component: 150  -  total flux cleaned = 0.000548107 Jy
! Component: 200  -  total flux cleaned = 0.000639673 Jy
! Total flux subtracted in 200 components = 0.000639673 Jy
! Clean residual min=-0.001741 max=0.002031 Jy/beam
! Clean residual mean=-0.000004 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.19356 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 65 components and 0.19356 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=5.579 mas, bpa=5.589 degrees
! Estimated noise=0.608855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202583 Jy
! Component: 100  -  total flux cleaned = -0.00025582 Jy
! Component: 150  -  total flux cleaned = -0.000257199 Jy
! Component: 200  -  total flux cleaned = -0.000226064 Jy
! Total flux subtracted in 200 components = -0.000226064 Jy
! Clean residual min=-0.002453 max=0.002211 Jy/beam
! Clean residual mean=-0.000001 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.193334 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.193334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049235Jy  sigma=1.200625
! Fit after  self-cal, rms=0.049228Jy  sigma=1.200494
wmodel /J0511+2631_S_map.mod
! wmodel: Unable to open new model file: /J0511+2631_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0511+2631_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.294 x 5.579 at 5.589 degrees (North through East)
! Clean map  min=-0.0023187  max=0.12371 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0511+2631_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123714 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000556948 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.35056 1.35056 2.70113 5.40226 10.8045 21.609 43.2181 86.4362
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  222.129 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0511+2631_S_dfm.log closed on Thu May 19 23:53:07 2016