! Started logfile: /scr/pima/bg219a_uvs/J0502+2516_X_dfm.log on Thu May 19 23:52:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0502+2516_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0502+2516_X_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0502+2516
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0502+2516_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029523Jy  sigma=28.771833
! Fit after  self-cal, rms=0.798001Jy  sigma=21.940119
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7575 mas, bmaj=1.182 mas, bpa=2.837 degrees
! Estimated noise=0.60826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.14602 Jy
! Component: 100  -  total flux cleaned = 0.200523 Jy
! Total flux subtracted in 100 components = 0.200523 Jy
! Clean residual min=-0.017529 max=0.027302 Jy/beam
! Clean residual mean=0.000001 rms=0.005344 Jy/beam
! Combined flux in latest and established models = 0.200523 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.200523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084791Jy  sigma=2.399629
! Fit after  self-cal, rms=0.084595Jy  sigma=2.395364
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.938 mas, bmaj=1.474 mas, bpa=1.758 degrees
! Estimated noise=0.371571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.04524 Jy
! Component: 100  -  total flux cleaned = 0.0665249 Jy
! Component: 150  -  total flux cleaned = 0.0771537 Jy
! Component: 200  -  total flux cleaned = 0.0831706 Jy
! Total flux subtracted in 200 components = 0.0831706 Jy
! Clean residual min=-0.006139 max=0.009508 Jy/beam
! Clean residual mean=0.000007 rms=0.001672 Jy/beam
! Combined flux in latest and established models = 0.283694 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 21 components and 0.283694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061122Jy  sigma=1.658349
! Fit after  self-cal, rms=0.060969Jy  sigma=1.655031
! Inverting map 
! Added new window around map position (1.2, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0084692 Jy
! Component: 100  -  total flux cleaned = 0.00896942 Jy
! Component: 150  -  total flux cleaned = 0.0097371 Jy
! Component: 200  -  total flux cleaned = 0.0101331 Jy
! Total flux subtracted in 200 components = 0.0101331 Jy
! Clean residual min=-0.004352 max=0.005140 Jy/beam
! Clean residual mean=0.000003 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.293827 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.293827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059506Jy  sigma=1.624722
! Fit after  self-cal, rms=0.059396Jy  sigma=1.621322
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.938 x 1.474 at 1.758 degrees (North through East)
! Clean map  min=-0.0037654  max=0.20695 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        1.00     OV        1.03     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.02     NL        1.00     OV        1.03     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        0.99     OV        1.05     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.97     NL        0.99     OV        1.04     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.02     OV        1.04     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        1.03     OV        1.04     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.00     OV        1.04     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        0.99     OV        1.02     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.96     NL        1.02     OV        1.02     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.05     NL        1.01     OV        1.01     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        0.94     OV        1.03     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        0.98     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.059396Jy  sigma=1.621322
! Fit after  self-cal, rms=0.059060Jy  sigma=1.607250
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9402 mas, bmaj=1.478 mas, bpa=1.844 degrees
! Estimated noise=0.371444 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.1857e-05 Jy
! Component: 100  -  total flux cleaned = -5.19609e-06 Jy
! Component: 150  -  total flux cleaned = 0.000261074 Jy
! Component: 200  -  total flux cleaned = 0.000471736 Jy
! Total flux subtracted in 200 components = 0.000471736 Jy
! Clean residual min=-0.003301 max=0.002837 Jy/beam
! Clean residual mean=-0.000001 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.294299 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 46 components and 0.294299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058883Jy  sigma=1.604562
! Fit after  self-cal, rms=0.058863Jy  sigma=1.604170
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058863Jy  sigma=1.604170
! Fit after  self-cal, rms=0.059342Jy  sigma=1.600063
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9455 mas, bmaj=1.471 mas, bpa=1.134 degrees
! Estimated noise=0.371923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124429 Jy
! Component: 100  -  total flux cleaned = 0.00137685 Jy
! Component: 150  -  total flux cleaned = 0.00131207 Jy
! Component: 200  -  total flux cleaned = 0.00134116 Jy
! Total flux subtracted in 200 components = 0.00134116 Jy
! Clean residual min=-0.002855 max=0.002303 Jy/beam
! Clean residual mean=-0.000001 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.29564 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.29564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059273Jy  sigma=1.598500
! Fit after  self-cal, rms=0.059272Jy  sigma=1.598380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000256047 Jy
! Component: 100  -  total flux cleaned = 0.0003098 Jy
! Component: 150  -  total flux cleaned = 0.000335317 Jy
! Component: 200  -  total flux cleaned = 0.000358806 Jy
! Total flux subtracted in 200 components = 0.000358806 Jy
! Clean residual min=-0.002669 max=0.002221 Jy/beam
! Clean residual mean=-0.000001 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.295999 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 61 components and 0.295999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059245Jy  sigma=1.597923
! Fit after  self-cal, rms=0.059241Jy  sigma=1.597897
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059241Jy  sigma=1.597897
! Fit after  self-cal, rms=0.059305Jy  sigma=1.597477
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9461 mas, bmaj=1.47 mas, bpa=0.9446 degrees
! Estimated noise=0.37165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000664237 Jy
! Component: 100  -  total flux cleaned = 0.000672013 Jy
! Component: 150  -  total flux cleaned = 0.000672389 Jy
! Component: 200  -  total flux cleaned = 0.000711791 Jy
! Total flux subtracted in 200 components = 0.000711791 Jy
! Clean residual min=-0.002490 max=0.002136 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.29671 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.29671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059275Jy  sigma=1.596925
! Fit after  self-cal, rms=0.059274Jy  sigma=1.596883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152477 Jy
! Component: 100  -  total flux cleaned = 0.000170502 Jy
! Component: 150  -  total flux cleaned = 0.000187811 Jy
! Component: 200  -  total flux cleaned = 0.000204316 Jy
! Total flux subtracted in 200 components = 0.000204316 Jy
! Clean residual min=-0.002386 max=0.002114 Jy/beam
! Clean residual mean=-0.000001 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.296915 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.296915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059260Jy  sigma=1.596672
! Fit after  self-cal, rms=0.059258Jy  sigma=1.596661
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059258Jy  sigma=1.596661
! Fit after  self-cal, rms=0.059312Jy  sigma=1.596509
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.256 mas, bmaj=3.559 mas, bpa=-12.74 degrees
! Estimated noise=0.473343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000600452 Jy
! Component: 100  -  total flux cleaned = 0.000620146 Jy
! Component: 150  -  total flux cleaned = 0.000608007 Jy
! Component: 200  -  total flux cleaned = 0.000616084 Jy
! Total flux subtracted in 200 components = 0.000616084 Jy
! Clean residual min=-0.002084 max=0.002048 Jy/beam
! Clean residual mean=-0.000004 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.297531 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.297531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059311Jy  sigma=1.596406
! Fit after  self-cal, rms=0.059310Jy  sigma=1.596348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121789 Jy
! Component: 100  -  total flux cleaned = 0.000170928 Jy
! Component: 150  -  total flux cleaned = 0.000185855 Jy
! Component: 200  -  total flux cleaned = 0.000198603 Jy
! Total flux subtracted in 200 components = 0.000198603 Jy
! Clean residual min=-0.002135 max=0.001983 Jy/beam
! Clean residual mean=-0.000004 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.297729 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 71 components and 0.297729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059312Jy  sigma=1.596354
! Fit after  self-cal, rms=0.059310Jy  sigma=1.596336
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9466 mas, bmaj=1.469 mas, bpa=0.8027 degrees
! Estimated noise=0.37152 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9466 x 1.469 at 0.8027 degrees (North through East)
! Clean map  min=-0.0025793  max=0.20739 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7648 mas, bmaj=1.174 mas, bpa=1.705 degrees
! Estimated noise=0.610208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146132 Jy
! Component: 100  -  total flux cleaned = 0.201405 Jy
! Component: 150  -  total flux cleaned = 0.233783 Jy
! Component: 200  -  total flux cleaned = 0.253425 Jy
! Total flux subtracted in 200 components = 0.253425 Jy
! Clean residual min=-0.007395 max=0.010236 Jy/beam
! Clean residual mean=0.000000 rms=0.002293 Jy/beam
! Combined flux in latest and established models = 0.253425 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.253425 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9466 mas, bmaj=1.469 mas, bpa=0.8027 degrees
! Estimated noise=0.37152 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182074 Jy
! Component: 100  -  total flux cleaned = 0.0277991 Jy
! Component: 150  -  total flux cleaned = 0.0335264 Jy
! Component: 200  -  total flux cleaned = 0.0371941 Jy
! Total flux subtracted in 200 components = 0.0371941 Jy
! Clean residual min=-0.002799 max=0.002992 Jy/beam
! Clean residual mean=0.000001 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.290619 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 34 components and 0.290619 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.256 mas, bmaj=3.559 mas, bpa=-12.74 degrees
! Estimated noise=0.473343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369717 Jy
! Component: 100  -  total flux cleaned = 0.00543208 Jy
! Component: 150  -  total flux cleaned = 0.00621679 Jy
! Component: 200  -  total flux cleaned = 0.00642608 Jy
! Total flux subtracted in 200 components = 0.00642608 Jy
! Clean residual min=-0.002351 max=0.002135 Jy/beam
! Clean residual mean=-0.000004 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.297045 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017464 Jy
! Component: 100  -  total flux cleaned = 0.000219914 Jy
! Component: 150  -  total flux cleaned = 0.000260911 Jy
! Component: 200  -  total flux cleaned = 0.000279319 Jy
! Total flux subtracted in 200 components = 0.000279319 Jy
! Clean residual min=-0.002294 max=0.002075 Jy/beam
! Clean residual mean=-0.000004 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.297324 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 59 components and 0.297324 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9466 mas, bmaj=1.469 mas, bpa=0.8027 degrees
! Estimated noise=0.37152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115758 Jy
! Component: 100  -  total flux cleaned = -0.000472939 Jy
! Component: 150  -  total flux cleaned = -0.000592872 Jy
! Component: 200  -  total flux cleaned = -0.000530524 Jy
! Total flux subtracted in 200 components = -0.000530524 Jy
! Clean residual min=-0.002298 max=0.002076 Jy/beam
! Clean residual mean=-0.000001 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.296793 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 68 components and 0.296793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059324Jy  sigma=1.596924
! Fit after  self-cal, rms=0.059302Jy  sigma=1.596326
wmodel /J0502+2516_X_map.mod
! wmodel: Unable to open new model file: /J0502+2516_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0502+2516_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9466 x 1.469 at 0.8027 degrees (North through East)
! Clean map  min=-0.0020444  max=0.20892 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0502+2516_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.208917 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000492672 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.707466 0.707466 1.41493 2.82986 5.65973 11.3195 22.6389 45.2778 90.5556
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.208 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  424.048 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0502+2516_X_dfm.log closed on Thu May 19 23:52:43 2016