! Started logfile: /scr/pima/bg219a_uvs/J0450+2249_X_dfm.log on Thu May 19 23:52:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0450+2249_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0450+2249_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0450+2249
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 4200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0450+2249_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004056Jy  sigma=28.782943
! Fit after  self-cal, rms=0.850449Jy  sigma=24.093796
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7286 mas, bmaj=1.228 mas, bpa=4.892 degrees
! Estimated noise=0.740776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113174 Jy
! Component: 100  -  total flux cleaned = 0.148079 Jy
! Total flux subtracted in 100 components = 0.148079 Jy
! Clean residual min=-0.008497 max=0.014013 Jy/beam
! Clean residual mean=0.000004 rms=0.002367 Jy/beam
! Combined flux in latest and established models = 0.148079 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.148079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059502Jy  sigma=1.645038
! Fit after  self-cal, rms=0.059379Jy  sigma=1.640897
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146408 Jy
! Component: 100  -  total flux cleaned = 0.0215873 Jy
! Total flux subtracted in 100 components = 0.0215873 Jy
! Clean residual min=-0.005823 max=0.006212 Jy/beam
! Clean residual mean=0.000007 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.169667 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.169667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055357Jy  sigma=1.504982
! Fit after  self-cal, rms=0.055379Jy  sigma=1.504600
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9367 mas, bmaj=1.532 mas, bpa=0.9008 degrees
! Estimated noise=0.420925 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00596509 Jy
! Component: 100  -  total flux cleaned = 0.00908881 Jy
! Component: 150  -  total flux cleaned = 0.0105114 Jy
! Component: 200  -  total flux cleaned = 0.0109392 Jy
! Total flux subtracted in 200 components = 0.0109392 Jy
! Clean residual min=-0.003234 max=0.004653 Jy/beam
! Clean residual mean=0.000026 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.180606 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 30 components and 0.180606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054720Jy  sigma=1.486632
! Fit after  self-cal, rms=0.054732Jy  sigma=1.486460
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9367 x 1.532 at 0.9008 degrees (North through East)
! Clean map  min=-0.0030423  max=0.15077 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        0.99     OV        1.03     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.99     NL        0.99     OV        1.02     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.99     NL        0.99     OV        1.09     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.00     OV        1.06     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.00     NL        0.98     OV        1.04     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.03     NL        0.99     OV        1.04     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        0.98     OV        1.08     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        1.00     OV        1.03     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        0.98     OV        1.04     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.01     NL        0.97     OV        1.02     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.01     OV        1.08     
!   PT        0.98     SC        1.13     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.07     NL        1.01     OV        1.07     
!   PT        0.97     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.054732Jy  sigma=1.486460
! Fit after  self-cal, rms=0.054842Jy  sigma=1.470779
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9408 mas, bmaj=1.538 mas, bpa=1.029 degrees
! Estimated noise=0.420461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000836257 Jy
! Component: 100  -  total flux cleaned = -0.000838964 Jy
! Component: 150  -  total flux cleaned = -0.000838801 Jy
! Component: 200  -  total flux cleaned = -0.000810878 Jy
! Total flux subtracted in 200 components = -0.000810878 Jy
! Clean residual min=-0.002233 max=0.002721 Jy/beam
! Clean residual mean=0.000008 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.179795 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 33 components and 0.179795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054770Jy  sigma=1.469569
! Fit after  self-cal, rms=0.054778Jy  sigma=1.469420
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054778Jy  sigma=1.469420
! Fit after  self-cal, rms=0.055605Jy  sigma=1.463884
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9477 mas, bmaj=1.534 mas, bpa=0.8357 degrees
! Estimated noise=0.421909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.53015e-05 Jy
! Component: 100  -  total flux cleaned = -9.44181e-05 Jy
! Component: 150  -  total flux cleaned = -0.000131031 Jy
! Component: 200  -  total flux cleaned = -0.000164465 Jy
! Total flux subtracted in 200 components = -0.000164465 Jy
! Clean residual min=-0.002025 max=0.002169 Jy/beam
! Clean residual mean=0.000012 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.17963 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 36 components and 0.17963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055596Jy  sigma=1.463688
! Fit after  self-cal, rms=0.055612Jy  sigma=1.463630
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135734 Jy
! Component: 100  -  total flux cleaned = 0.00173387 Jy
! Component: 150  -  total flux cleaned = 0.00189749 Jy
! Component: 200  -  total flux cleaned = 0.00201492 Jy
! Total flux subtracted in 200 components = 0.00201492 Jy
! Clean residual min=-0.001672 max=0.001737 Jy/beam
! Clean residual mean=0.000006 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.181645 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.181645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055522Jy  sigma=1.461774
! Fit after  self-cal, rms=0.055514Jy  sigma=1.461582
! Inverting map 
! Added new window around map position (-50.2, 29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147843 Jy
! Component: 100  -  total flux cleaned = 0.00184233 Jy
! Component: 150  -  total flux cleaned = 0.00195486 Jy
! Component: 200  -  total flux cleaned = 0.00205905 Jy
! Total flux subtracted in 200 components = 0.00205905 Jy
! Clean residual min=-0.001515 max=0.001496 Jy/beam
! Clean residual mean=0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.183704 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.183704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055455Jy  sigma=1.460325
! Fit after  self-cal, rms=0.055450Jy  sigma=1.460205
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055450Jy  sigma=1.460205
! Fit after  self-cal, rms=0.055362Jy  sigma=1.459955
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9468 mas, bmaj=1.532 mas, bpa=1.002 degrees
! Estimated noise=0.421096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000907335 Jy
! Component: 100  -  total flux cleaned = 0.00120208 Jy
! Component: 150  -  total flux cleaned = 0.00122583 Jy
! Component: 200  -  total flux cleaned = 0.0012475 Jy
! Total flux subtracted in 200 components = 0.0012475 Jy
! Clean residual min=-0.001577 max=0.001418 Jy/beam
! Clean residual mean=0.000002 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.184952 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.184952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055333Jy  sigma=1.459397
! Fit after  self-cal, rms=0.055331Jy  sigma=1.459355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355704 Jy
! Component: 100  -  total flux cleaned = 0.000355769 Jy
! Component: 150  -  total flux cleaned = 0.000410833 Jy
! Component: 200  -  total flux cleaned = 0.000428123 Jy
! Total flux subtracted in 200 components = 0.000428123 Jy
! Clean residual min=-0.001572 max=0.001405 Jy/beam
! Clean residual mean=0.000001 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.18538 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.18538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055315Jy  sigma=1.459086
! Fit after  self-cal, rms=0.055314Jy  sigma=1.459077
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055314Jy  sigma=1.459077
! Fit after  self-cal, rms=0.055215Jy  sigma=1.459009
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.292 mas, bmaj=3.647 mas, bpa=-14.75 degrees
! Estimated noise=0.527734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110003 Jy
! Component: 100  -  total flux cleaned = 0.000200607 Jy
! Component: 150  -  total flux cleaned = 0.000201407 Jy
! Component: 200  -  total flux cleaned = 0.000174479 Jy
! Total flux subtracted in 200 components = 0.000174479 Jy
! Clean residual min=-0.001053 max=0.001084 Jy/beam
! Clean residual mean=0.000004 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.185554 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 77 components and 0.185554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055214Jy  sigma=1.458943
! Fit after  self-cal, rms=0.055213Jy  sigma=1.458914
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.60237e-05 Jy
! Component: 100  -  total flux cleaned = 5.48702e-05 Jy
! Component: 150  -  total flux cleaned = 3.84058e-05 Jy
! Component: 200  -  total flux cleaned = 1.49931e-05 Jy
! Total flux subtracted in 200 components = 1.49931e-05 Jy
! Clean residual min=-0.001010 max=0.001034 Jy/beam
! Clean residual mean=0.000004 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.185569 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 80 components and 0.185569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055215Jy  sigma=1.458932
! Fit after  self-cal, rms=0.055214Jy  sigma=1.458915
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.946 mas, bmaj=1.532 mas, bpa=1.086 degrees
! Estimated noise=0.420529 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.946 x 1.532 at 1.086 degrees (North through East)
! Clean map  min=-0.0013212  max=0.15096 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7353 mas, bmaj=1.227 mas, bpa=4.966 degrees
! Estimated noise=0.744437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11348 Jy
! Component: 100  -  total flux cleaned = 0.148809 Jy
! Component: 150  -  total flux cleaned = 0.162963 Jy
! Component: 200  -  total flux cleaned = 0.169341 Jy
! Total flux subtracted in 200 components = 0.169341 Jy
! Clean residual min=-0.004019 max=0.004354 Jy/beam
! Clean residual mean=0.000003 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.169341 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.169341 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.946 mas, bmaj=1.532 mas, bpa=1.086 degrees
! Estimated noise=0.420529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00504645 Jy
! Component: 100  -  total flux cleaned = 0.00802231 Jy
! Component: 150  -  total flux cleaned = 0.0101571 Jy
! Component: 200  -  total flux cleaned = 0.011709 Jy
! Total flux subtracted in 200 components = 0.011709 Jy
! Clean residual min=-0.001709 max=0.001782 Jy/beam
! Clean residual mean=0.000009 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.18105 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 33 components and 0.18105 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.292 mas, bmaj=3.647 mas, bpa=-14.75 degrees
! Estimated noise=0.527734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139498 Jy
! Component: 100  -  total flux cleaned = 0.00218914 Jy
! Component: 150  -  total flux cleaned = 0.00277553 Jy
! Component: 200  -  total flux cleaned = 0.00321945 Jy
! Total flux subtracted in 200 components = 0.00321945 Jy
! Clean residual min=-0.001053 max=0.001024 Jy/beam
! Clean residual mean=0.000009 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.18427 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187829 Jy
! Component: 100  -  total flux cleaned = 0.000276463 Jy
! Component: 150  -  total flux cleaned = 0.000323354 Jy
! Component: 200  -  total flux cleaned = 0.000389146 Jy
! Total flux subtracted in 200 components = 0.000389146 Jy
! Clean residual min=-0.001011 max=0.000997 Jy/beam
! Clean residual mean=0.000007 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.184659 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 51 components and 0.184659 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.946 mas, bmaj=1.532 mas, bpa=1.086 degrees
! Estimated noise=0.420529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126361 Jy
! Component: 100  -  total flux cleaned = 8.74766e-05 Jy
! Component: 150  -  total flux cleaned = 0.000158741 Jy
! Component: 200  -  total flux cleaned = 0.000189333 Jy
! Total flux subtracted in 200 components = 0.000189333 Jy
! Clean residual min=-0.001648 max=0.001488 Jy/beam
! Clean residual mean=0.000002 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.184848 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.184848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055298Jy  sigma=1.460464
! Fit after  self-cal, rms=0.055294Jy  sigma=1.460341
wmodel /J0450+2249_X_map.mod
! wmodel: Unable to open new model file: /J0450+2249_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0450+2249_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.946 x 1.532 at 1.086 degrees (North through East)
! Clean map  min=-0.0013717  max=0.15144 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0450+2249_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.151442 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000340862 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.675233 0.675233 1.35047 2.70093 5.40187 10.8037 21.6075 43.2149 86.4299
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.151 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  444.29 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0450+2249_X_dfm.log closed on Thu May 19 23:52:36 2016