! Started logfile: /scr/pima/bg219a_uvs/J0439+3045_S_dfm.log on Thu May 19 23:52:09 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0439+3045_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0439+3045_S_uva.fits ! AN table 1: 47 integrations on 15 of 15 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0439+3045 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2820 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0439+3045_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.042821Jy sigma=26.236443 ! Fit after self-cal, rms=0.739983Jy sigma=18.659515 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=4.59 mas, bpa=-13.91 degrees ! Estimated noise=0.777095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193327 Jy ! Component: 100 - total flux cleaned = 0.244231 Jy ! Total flux subtracted in 100 components = 0.244231 Jy ! Clean residual min=-0.012019 max=0.020370 Jy/beam ! Clean residual mean=-0.000073 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 0.244231 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.244231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067492Jy sigma=1.599293 ! Fit after self-cal, rms=0.067484Jy sigma=1.598498 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210277 Jy ! Component: 100 - total flux cleaned = 0.0318182 Jy ! Total flux subtracted in 100 components = 0.0318182 Jy ! Clean residual min=-0.007410 max=0.009506 Jy/beam ! Clean residual mean=-0.000032 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.276049 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.276049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058459Jy sigma=1.334041 ! Fit after self-cal, rms=0.058441Jy sigma=1.333176 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=5.468 mas, bpa=-7.361 degrees ! Estimated noise=0.542821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104453 Jy ! Component: 100 - total flux cleaned = 0.0158615 Jy ! Component: 150 - total flux cleaned = 0.0173281 Jy ! Component: 200 - total flux cleaned = 0.0181679 Jy ! Total flux subtracted in 200 components = 0.0181679 Jy ! Clean residual min=-0.005459 max=0.008300 Jy/beam ! Clean residual mean=-0.000017 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.294217 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.294217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056606Jy sigma=1.278642 ! Fit after self-cal, rms=0.056577Jy sigma=1.277828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 5.468 at -7.361 degrees (North through East) ! Clean map min=-0.0052549 max=0.25839 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.07 NL 1.01 OV 1.02 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 1.05 NL 0.99 OV 1.00 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 1.04 NL 0.98 OV 1.01 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 1.02 NL 1.02 OV 0.93 ! PT 0.98 SC 0.98 ! ! ! Fit before self-cal, rms=0.056577Jy sigma=1.277828 ! Fit after self-cal, rms=0.055472Jy sigma=1.255480 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=5.482 mas, bpa=-6.312 degrees ! Estimated noise=0.542894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599106 Jy ! Component: 100 - total flux cleaned = 0.00657719 Jy ! Component: 150 - total flux cleaned = 0.00646699 Jy ! Component: 200 - total flux cleaned = 0.00646786 Jy ! Total flux subtracted in 200 components = 0.00646786 Jy ! Clean residual min=-0.003840 max=0.003605 Jy/beam ! Clean residual mean=-0.000001 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.300685 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.300685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054507Jy sigma=1.231393 ! Fit after self-cal, rms=0.054447Jy sigma=1.229736 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054447Jy sigma=1.229736 ! Fit after self-cal, rms=0.053788Jy sigma=1.213140 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.543 mas, bmaj=5.461 mas, bpa=-6.913 degrees ! Estimated noise=0.540546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192652 Jy ! Component: 100 - total flux cleaned = 0.00290282 Jy ! Component: 150 - total flux cleaned = 0.00313528 Jy ! Component: 200 - total flux cleaned = 0.00330119 Jy ! Total flux subtracted in 200 components = 0.00330119 Jy ! Clean residual min=-0.002813 max=0.002852 Jy/beam ! Clean residual mean=0.000003 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.303986 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.303986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053722Jy sigma=1.210996 ! Fit after self-cal, rms=0.053715Jy sigma=1.210710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522729 Jy ! Component: 100 - total flux cleaned = 0.000630262 Jy ! Component: 150 - total flux cleaned = 0.000699327 Jy ! Component: 200 - total flux cleaned = 0.00074717 Jy ! Total flux subtracted in 200 components = 0.00074717 Jy ! Clean residual min=-0.002683 max=0.002590 Jy/beam ! Clean residual mean=0.000004 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.304733 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.304733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053700Jy sigma=1.210235 ! Fit after self-cal, rms=0.053698Jy sigma=1.210163 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053698Jy sigma=1.210163 ! Fit after self-cal, rms=0.053635Jy sigma=1.209890 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=5.459 mas, bpa=-7.008 degrees ! Estimated noise=0.540452 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000800745 Jy ! Component: 100 - total flux cleaned = 0.00132272 Jy ! Component: 150 - total flux cleaned = 0.00144131 Jy ! Component: 200 - total flux cleaned = 0.00151667 Jy ! Total flux subtracted in 200 components = 0.00151667 Jy ! Clean residual min=-0.002605 max=0.002454 Jy/beam ! Clean residual mean=0.000003 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.30625 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.30625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053621Jy sigma=1.209423 ! Fit after self-cal, rms=0.053619Jy sigma=1.209369 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193735 Jy ! Component: 100 - total flux cleaned = 0.000298166 Jy ! Component: 150 - total flux cleaned = 0.000350938 Jy ! Component: 200 - total flux cleaned = 0.000411717 Jy ! Total flux subtracted in 200 components = 0.000411717 Jy ! Clean residual min=-0.002539 max=0.002433 Jy/beam ! Clean residual mean=0.000003 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.306662 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.306662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053612Jy sigma=1.209174 ! Fit after self-cal, rms=0.053612Jy sigma=1.209153 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053612Jy sigma=1.209153 ! Fit after self-cal, rms=0.053585Jy sigma=1.209038 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.253 mas, bmaj=12.49 mas, bpa=-2.35 degrees ! Estimated noise=0.660373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546158 Jy ! Component: 100 - total flux cleaned = 0.000721288 Jy ! Component: 150 - total flux cleaned = 0.000869836 Jy ! Component: 200 - total flux cleaned = 0.000946784 Jy ! Total flux subtracted in 200 components = 0.000946784 Jy ! Clean residual min=-0.002695 max=0.002607 Jy/beam ! Clean residual mean=0.000004 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.307609 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.307609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053585Jy sigma=1.208935 ! Fit after self-cal, rms=0.053579Jy sigma=1.208824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.02503e-05 Jy ! Component: 100 - total flux cleaned = 0.000216987 Jy ! Component: 150 - total flux cleaned = 0.00027693 Jy ! Component: 200 - total flux cleaned = 0.000303652 Jy ! Total flux subtracted in 200 components = 0.000303652 Jy ! Clean residual min=-0.002697 max=0.002592 Jy/beam ! Clean residual mean=0.000004 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.307912 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.307912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053581Jy sigma=1.208787 ! Fit after self-cal, rms=0.053578Jy sigma=1.208724 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=5.458 mas, bpa=-7.052 degrees ! Estimated noise=0.540611 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 5.458 at -7.052 degrees (North through East) ! Clean map min=-0.0023984 max=0.25826 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=4.581 mas, bpa=-13.79 degrees ! Estimated noise=0.775533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192858 Jy ! Component: 100 - total flux cleaned = 0.243204 Jy ! Component: 150 - total flux cleaned = 0.26343 Jy ! Component: 200 - total flux cleaned = 0.274434 Jy ! Total flux subtracted in 200 components = 0.274434 Jy ! Clean residual min=-0.006573 max=0.007633 Jy/beam ! Clean residual mean=-0.000032 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 0.274434 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.274434 Jy ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=5.458 mas, bpa=-7.052 degrees ! Estimated noise=0.540611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115948 Jy ! Component: 100 - total flux cleaned = 0.0185408 Jy ! Component: 150 - total flux cleaned = 0.0231752 Jy ! Component: 200 - total flux cleaned = 0.0264278 Jy ! Total flux subtracted in 200 components = 0.0264278 Jy ! Clean residual min=-0.003199 max=0.002863 Jy/beam ! Clean residual mean=-0.000008 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.300862 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 40 components and 0.300862 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.253 mas, bmaj=12.49 mas, bpa=-2.35 degrees ! Estimated noise=0.660373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317668 Jy ! Component: 100 - total flux cleaned = 0.00487452 Jy ! Component: 150 - total flux cleaned = 0.00587071 Jy ! Component: 200 - total flux cleaned = 0.00647792 Jy ! Total flux subtracted in 200 components = 0.00647792 Jy ! Clean residual min=-0.002388 max=0.002583 Jy/beam ! Clean residual mean=0.000002 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.30734 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379709 Jy ! Component: 100 - total flux cleaned = 0.000469042 Jy ! Component: 150 - total flux cleaned = 0.00053834 Jy ! Component: 200 - total flux cleaned = 0.000565588 Jy ! Total flux subtracted in 200 components = 0.000565588 Jy ! Clean residual min=-0.002373 max=0.002568 Jy/beam ! Clean residual mean=0.000003 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.307905 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 78 components and 0.307905 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=5.458 mas, bpa=-7.052 degrees ! Estimated noise=0.540611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.98215e-05 Jy ! Component: 100 - total flux cleaned = -9.07216e-05 Jy ! Component: 150 - total flux cleaned = -5.74843e-05 Jy ! Component: 200 - total flux cleaned = 3.2868e-06 Jy ! Total flux subtracted in 200 components = 3.2868e-06 Jy ! Clean residual min=-0.002314 max=0.002357 Jy/beam ! Clean residual mean=0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.307908 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.307909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053631Jy sigma=1.210196 ! Fit after self-cal, rms=0.053619Jy sigma=1.210021 wmodel /J0439+3045_S_map.mod ! wmodel: Unable to open new model file: /J0439+3045_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0439+3045_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 5.458 at -7.052 degrees (North through East) ! Clean map min=-0.0022484 max=0.25903 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0439+3045_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.259033 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000604895 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.700561 0.700561 1.40112 2.80225 5.60449 11.209 22.418 44.8359 89.6719 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.259 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 428.228 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0439+3045_S_dfm.log closed on Thu May 19 23:52:12 2016