! Started logfile: /scr/pima/bg219a_uvs/J0431-0406_X_dfm.log on Thu May 19 23:51:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0431-0406_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0431-0406_X_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0431-0406
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0431-0406_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025521Jy  sigma=28.216697
! Fit after  self-cal, rms=0.846055Jy  sigma=22.769575
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.723 mas, bmaj=1.843 mas, bpa=-8.454 degrees
! Estimated noise=0.544281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114808 Jy
! Component: 100  -  total flux cleaned = 0.150636 Jy
! Total flux subtracted in 100 components = 0.150636 Jy
! Clean residual min=-0.014902 max=0.030304 Jy/beam
! Clean residual mean=-0.000015 rms=0.004140 Jy/beam
! Combined flux in latest and established models = 0.150636 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.150636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069687Jy  sigma=1.806094
! Fit after  self-cal, rms=0.069466Jy  sigma=1.801533
! Inverting map 
! Added new window around map position (0.8, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026446 Jy
! Component: 100  -  total flux cleaned = 0.0396967 Jy
! Total flux subtracted in 100 components = 0.0396967 Jy
! Clean residual min=-0.011686 max=0.016325 Jy/beam
! Clean residual mean=-0.000002 rms=0.002301 Jy/beam
! Combined flux in latest and established models = 0.190333 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.190333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059064Jy  sigma=1.492729
! Fit after  self-cal, rms=0.058370Jy  sigma=1.468218
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9083 mas, bmaj=2.206 mas, bpa=-7.812 degrees
! Estimated noise=0.310297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793662 Jy
! Component: 100  -  total flux cleaned = 0.0079304 Jy
! Component: 150  -  total flux cleaned = 0.00829653 Jy
! Component: 200  -  total flux cleaned = 0.00859404 Jy
! Total flux subtracted in 200 components = 0.00859404 Jy
! Clean residual min=-0.005052 max=0.005289 Jy/beam
! Clean residual mean=0.000003 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.198927 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.198927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056095Jy  sigma=1.416429
! Fit after  self-cal, rms=0.056023Jy  sigma=1.414141
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9083 x 2.206 at -7.812 degrees (North through East)
! Clean map  min=-0.0045373  max=0.14127 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.99     OV        0.99     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.04     MK        0.96     NL        1.01     OV        0.98     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.96     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.06     NL        0.99     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.04     NL        0.98     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.96     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.98     NL        1.00     OV        0.96     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.96     NL        0.99     OV        0.97     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.95     NL        0.99     OV        1.00     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        0.95     NL        0.99     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.056023Jy  sigma=1.414141
! Fit after  self-cal, rms=0.055004Jy  sigma=1.407899
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9079 mas, bmaj=2.21 mas, bpa=-7.968 degrees
! Estimated noise=0.305864 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000849823 Jy
! Component: 100  -  total flux cleaned = -0.00118003 Jy
! Component: 150  -  total flux cleaned = -0.00136725 Jy
! Component: 200  -  total flux cleaned = -0.00137596 Jy
! Total flux subtracted in 200 components = -0.00137596 Jy
! Clean residual min=-0.003616 max=0.003233 Jy/beam
! Clean residual mean=0.000004 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.197551 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.197551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054555Jy  sigma=1.399688
! Fit after  self-cal, rms=0.054555Jy  sigma=1.399467
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054555Jy  sigma=1.399467
! Fit after  self-cal, rms=0.055592Jy  sigma=1.395177
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9102 mas, bmaj=2.216 mas, bpa=-7.906 degrees
! Estimated noise=0.307309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113386 Jy
! Component: 100  -  total flux cleaned = 0.00113433 Jy
! Component: 150  -  total flux cleaned = 0.00109042 Jy
! Component: 200  -  total flux cleaned = 0.00100833 Jy
! Total flux subtracted in 200 components = 0.00100833 Jy
! Clean residual min=-0.003259 max=0.002911 Jy/beam
! Clean residual mean=0.000000 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.198559 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.198559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055494Jy  sigma=1.392929
! Fit after  self-cal, rms=0.055502Jy  sigma=1.392830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.0645e-05 Jy
! Component: 100  -  total flux cleaned = -3.4939e-05 Jy
! Component: 150  -  total flux cleaned = -6.98664e-05 Jy
! Component: 200  -  total flux cleaned = -6.84389e-05 Jy
! Total flux subtracted in 200 components = -6.84389e-05 Jy
! Clean residual min=-0.003059 max=0.002675 Jy/beam
! Clean residual mean=0.000000 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.198491 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.198491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055453Jy  sigma=1.391635
! Fit after  self-cal, rms=0.055455Jy  sigma=1.391598
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055455Jy  sigma=1.391598
! Fit after  self-cal, rms=0.055659Jy  sigma=1.390315
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9097 mas, bmaj=2.217 mas, bpa=-7.953 degrees
! Estimated noise=0.307895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000585837 Jy
! Component: 100  -  total flux cleaned = 0.000586109 Jy
! Component: 150  -  total flux cleaned = 0.000585799 Jy
! Component: 200  -  total flux cleaned = 0.000525849 Jy
! Total flux subtracted in 200 components = 0.000525849 Jy
! Clean residual min=-0.002746 max=0.002426 Jy/beam
! Clean residual mean=0.000000 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.199016 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.199016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055619Jy  sigma=1.389232
! Fit after  self-cal, rms=0.055625Jy  sigma=1.389190
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.44169e-05 Jy
! Component: 100  -  total flux cleaned = 3.56381e-05 Jy
! Component: 150  -  total flux cleaned = -1.67659e-05 Jy
! Component: 200  -  total flux cleaned = -1.63392e-05 Jy
! Total flux subtracted in 200 components = -1.63392e-05 Jy
! Clean residual min=-0.002551 max=0.002251 Jy/beam
! Clean residual mean=0.000000 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.199 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 0.199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055600Jy  sigma=1.388555
! Fit after  self-cal, rms=0.055602Jy  sigma=1.388533
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055602Jy  sigma=1.388533
! Fit after  self-cal, rms=0.055807Jy  sigma=1.387934
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.146 mas, bmaj=5.112 mas, bpa=-12.55 degrees
! Estimated noise=0.388338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000349586 Jy
! Component: 100  -  total flux cleaned = 0.000301965 Jy
! Component: 150  -  total flux cleaned = 0.000238977 Jy
! Component: 200  -  total flux cleaned = 0.000219952 Jy
! Total flux subtracted in 200 components = 0.000219952 Jy
! Clean residual min=-0.001763 max=0.001669 Jy/beam
! Clean residual mean=0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.19922 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 66 components and 0.19922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055807Jy  sigma=1.387940
! Fit after  self-cal, rms=0.055811Jy  sigma=1.387890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.0952e-05 Jy
! Component: 100  -  total flux cleaned = -1.41831e-05 Jy
! Component: 150  -  total flux cleaned = -7.64926e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105294 Jy
! Total flux subtracted in 200 components = -0.000105294 Jy
! Clean residual min=-0.001656 max=0.001614 Jy/beam
! Clean residual mean=0.000001 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.199115 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 69 components and 0.199115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055814Jy  sigma=1.387982
! Fit after  self-cal, rms=0.055816Jy  sigma=1.387965
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9095 mas, bmaj=2.217 mas, bpa=-7.989 degrees
! Estimated noise=0.3082 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9095 x 2.217 at -7.989 degrees (North through East)
! Clean map  min=-0.005504  max=0.14084 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7248 mas, bmaj=1.851 mas, bpa=-8.655 degrees
! Estimated noise=0.541719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116402 Jy
! Component: 100  -  total flux cleaned = 0.155238 Jy
! Component: 150  -  total flux cleaned = 0.173978 Jy
! Component: 200  -  total flux cleaned = 0.184854 Jy
! Total flux subtracted in 200 components = 0.184854 Jy
! Clean residual min=-0.006863 max=0.008309 Jy/beam
! Clean residual mean=-0.000005 rms=0.001619 Jy/beam
! Combined flux in latest and established models = 0.184854 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.184854 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9095 mas, bmaj=2.217 mas, bpa=-7.989 degrees
! Estimated noise=0.3082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112058 Jy
! Component: 100  -  total flux cleaned = 0.0157509 Jy
! Component: 150  -  total flux cleaned = 0.0168215 Jy
! Component: 200  -  total flux cleaned = 0.0172455 Jy
! Total flux subtracted in 200 components = 0.0172455 Jy
! Clean residual min=-0.005402 max=0.004167 Jy/beam
! Clean residual mean=0.000003 rms=0.000995 Jy/beam
! Combined flux in latest and established models = 0.2021 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 44 components and 0.2021 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.146 mas, bmaj=5.112 mas, bpa=-12.55 degrees
! Estimated noise=0.388338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169181 Jy
! Component: 100  -  total flux cleaned = 0.00157424 Jy
! Component: 150  -  total flux cleaned = 0.00118829 Jy
! Component: 200  -  total flux cleaned = 0.00077276 Jy
! Total flux subtracted in 200 components = 0.00077276 Jy
! Clean residual min=-0.003833 max=0.002655 Jy/beam
! Clean residual mean=0.000010 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.202872 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000351043 Jy
! Component: 100  -  total flux cleaned = -0.000725423 Jy
! Component: 150  -  total flux cleaned = -0.00105463 Jy
! Component: 200  -  total flux cleaned = -0.00129849 Jy
! Total flux subtracted in 200 components = -0.00129849 Jy
! Clean residual min=-0.002708 max=0.002172 Jy/beam
! Clean residual mean=0.000007 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.201574 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 71 components and 0.201574 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9095 mas, bmaj=2.217 mas, bpa=-7.989 degrees
! Estimated noise=0.3082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000751976 Jy
! Component: 100  -  total flux cleaned = -0.000694658 Jy
! Component: 150  -  total flux cleaned = -0.000696911 Jy
! Component: 200  -  total flux cleaned = -0.000785396 Jy
! Total flux subtracted in 200 components = -0.000785396 Jy
! Clean residual min=-0.002759 max=0.002131 Jy/beam
! Clean residual mean=0.000003 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.200789 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.200789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055878Jy  sigma=1.389190
! Fit after  self-cal, rms=0.055866Jy  sigma=1.388703
wmodel /J0431-0406_X_map.mod
! wmodel: Unable to open new model file: /J0431-0406_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0431-0406_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9095 x 2.217 at -7.989 degrees (North through East)
! Clean map  min=-0.0061539  max=0.13178 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0431-0406_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.131784 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000498312 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13438 1.13438 2.26876 4.53753 9.07505 18.1501 36.3002 72.6004
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.131 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  264.461 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0431-0406_X_dfm.log closed on Thu May 19 23:52:01 2016