! Started logfile: /scr/pima/bg219a_uvs/J0429+3319_X_dfm.log on Thu May 19 23:51:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0429+3319_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0429+3319_X_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0429+3319
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0429+3319_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012066Jy  sigma=27.901319
! Fit after  self-cal, rms=0.839125Jy  sigma=22.751635
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7362 mas, bmaj=1.078 mas, bpa=-2.065 degrees
! Estimated noise=0.651718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.115921 Jy
! Component: 100  -  total flux cleaned = 0.158693 Jy
! Total flux subtracted in 100 components = 0.158693 Jy
! Clean residual min=-0.021025 max=0.039798 Jy/beam
! Clean residual mean=-0.000056 rms=0.005956 Jy/beam
! Combined flux in latest and established models = 0.158693 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.158693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099450Jy  sigma=2.760208
! Fit after  self-cal, rms=0.099276Jy  sigma=2.754246
! Inverting map 
! Added new window around map position (-5.6, 4.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0376018 Jy
! Component: 100  -  total flux cleaned = 0.0613924 Jy
! Total flux subtracted in 100 components = 0.0613924 Jy
! Clean residual min=-0.013344 max=0.019368 Jy/beam
! Clean residual mean=-0.000039 rms=0.003691 Jy/beam
! Combined flux in latest and established models = 0.220085 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 28 components and 0.220085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077276Jy  sigma=2.105444
! Fit after  self-cal, rms=0.076385Jy  sigma=2.079522
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9427 mas, bmaj=1.373 mas, bpa=-4.311 degrees
! Estimated noise=0.345008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0298418 Jy
! Component: 100  -  total flux cleaned = 0.0492579 Jy
! Component: 150  -  total flux cleaned = 0.0626894 Jy
! Component: 200  -  total flux cleaned = 0.0722949 Jy
! Total flux subtracted in 200 components = 0.0722949 Jy
! Clean residual min=-0.007961 max=0.014666 Jy/beam
! Clean residual mean=-0.000055 rms=0.002467 Jy/beam
! Combined flux in latest and established models = 0.29238 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 41 components and 0.29238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062637Jy  sigma=1.635089
! Fit after  self-cal, rms=0.062372Jy  sigma=1.627560
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9427 x 1.373 at -4.311 degrees (North through East)
! Clean map  min=-0.0075312  max=0.1647 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.12     NL        0.97     OV        1.00     
!   PT        0.93     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.18     NL        0.97     OV        1.00     
!   PT        0.93     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.10     NL        0.99     OV        0.99     
!   PT        0.93     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.12     NL        0.99     OV        1.00     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.91     MK        1.14     NL        0.99     OV        0.99     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.16     NL        1.00     OV        1.01     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.15     NL        0.97     OV        1.00     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.14     NL        0.98     OV        0.98     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.13     NL        0.98     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.11     NL        1.00     OV        0.99     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.062372Jy  sigma=1.627560
! Fit after  self-cal, rms=0.061610Jy  sigma=1.575453
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9726 mas, bmaj=1.408 mas, bpa=-2.751 degrees
! Estimated noise=0.34183 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307537 Jy
! Component: 100  -  total flux cleaned = 0.00559341 Jy
! Component: 150  -  total flux cleaned = 0.00788762 Jy
! Component: 200  -  total flux cleaned = 0.00959583 Jy
! Total flux subtracted in 200 components = 0.00959583 Jy
! Clean residual min=-0.004267 max=0.004305 Jy/beam
! Clean residual mean=-0.000008 rms=0.000999 Jy/beam
! Combined flux in latest and established models = 0.301976 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 60 components and 0.301976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059709Jy  sigma=1.539817
! Fit after  self-cal, rms=0.059637Jy  sigma=1.537554
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059637Jy  sigma=1.537554
! Fit after  self-cal, rms=0.059255Jy  sigma=1.528975
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9732 mas, bmaj=1.409 mas, bpa=-2.899 degrees
! Estimated noise=0.340889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149174 Jy
! Component: 100  -  total flux cleaned = 0.00207918 Jy
! Component: 150  -  total flux cleaned = 0.00258544 Jy
! Component: 200  -  total flux cleaned = 0.00309079 Jy
! Total flux subtracted in 200 components = 0.00309079 Jy
! Clean residual min=-0.003731 max=0.003373 Jy/beam
! Clean residual mean=-0.000002 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.305067 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.305067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058867Jy  sigma=1.523420
! Fit after  self-cal, rms=0.058854Jy  sigma=1.523039
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000686514 Jy
! Component: 100  -  total flux cleaned = 0.000980738 Jy
! Component: 150  -  total flux cleaned = 0.00129556 Jy
! Component: 200  -  total flux cleaned = 0.00144036 Jy
! Total flux subtracted in 200 components = 0.00144036 Jy
! Clean residual min=-0.003487 max=0.003074 Jy/beam
! Clean residual mean=-0.000001 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.306507 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.306507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058710Jy  sigma=1.521188
! Fit after  self-cal, rms=0.058701Jy  sigma=1.521057
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058701Jy  sigma=1.521057
! Fit after  self-cal, rms=0.058851Jy  sigma=1.519283
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9723 mas, bmaj=1.404 mas, bpa=-2.763 degrees
! Estimated noise=0.340368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101145 Jy
! Component: 100  -  total flux cleaned = 0.0012316 Jy
! Component: 150  -  total flux cleaned = 0.00138826 Jy
! Component: 200  -  total flux cleaned = 0.00149469 Jy
! Total flux subtracted in 200 components = 0.00149469 Jy
! Clean residual min=-0.003154 max=0.002649 Jy/beam
! Clean residual mean=0.000000 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.308002 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 0.308002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058775Jy  sigma=1.518167
! Fit after  self-cal, rms=0.058768Jy  sigma=1.518092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264955 Jy
! Component: 100  -  total flux cleaned = 0.000328182 Jy
! Component: 150  -  total flux cleaned = 0.000416711 Jy
! Component: 200  -  total flux cleaned = 0.000500105 Jy
! Total flux subtracted in 200 components = 0.000500105 Jy
! Clean residual min=-0.003030 max=0.002577 Jy/beam
! Clean residual mean=0.000001 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.308502 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.308502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058726Jy  sigma=1.517540
! Fit after  self-cal, rms=0.058724Jy  sigma=1.517509
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058724Jy  sigma=1.517509
! Fit after  self-cal, rms=0.058874Jy  sigma=1.516812
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.084 mas, bmaj=3.35 mas, bpa=-5.17 degrees
! Estimated noise=0.407861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000662461 Jy
! Component: 100  -  total flux cleaned = 0.000743116 Jy
! Component: 150  -  total flux cleaned = 0.000791683 Jy
! Component: 200  -  total flux cleaned = 0.00082044 Jy
! Total flux subtracted in 200 components = 0.00082044 Jy
! Clean residual min=-0.002497 max=0.002375 Jy/beam
! Clean residual mean=0.000002 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.309323 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.309323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058858Jy  sigma=1.516592
! Fit after  self-cal, rms=0.058858Jy  sigma=1.516573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.60444e-05 Jy
! Component: 100  -  total flux cleaned = 4.24154e-05 Jy
! Component: 150  -  total flux cleaned = 6.7121e-05 Jy
! Component: 200  -  total flux cleaned = 9.03367e-05 Jy
! Total flux subtracted in 200 components = 9.03367e-05 Jy
! Clean residual min=-0.002505 max=0.002397 Jy/beam
! Clean residual mean=0.000003 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.309413 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 112 components and 0.309413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058851Jy  sigma=1.516540
! Fit after  self-cal, rms=0.058850Jy  sigma=1.516532
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9728 mas, bmaj=1.404 mas, bpa=-2.912 degrees
! Estimated noise=0.340399 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9728 x 1.404 at -2.912 degrees (North through East)
! Clean map  min=-0.0026805  max=0.16001 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7548 mas, bmaj=1.097 mas, bpa=-1.351 degrees
! Estimated noise=0.66259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116925 Jy
! Component: 100  -  total flux cleaned = 0.166712 Jy
! Component: 150  -  total flux cleaned = 0.198222 Jy
! Component: 200  -  total flux cleaned = 0.220227 Jy
! Total flux subtracted in 200 components = 0.220227 Jy
! Clean residual min=-0.012341 max=0.015811 Jy/beam
! Clean residual mean=-0.000032 rms=0.003146 Jy/beam
! Combined flux in latest and established models = 0.220227 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.220227 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9728 mas, bmaj=1.404 mas, bpa=-2.912 degrees
! Estimated noise=0.340399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257978 Jy
! Component: 100  -  total flux cleaned = 0.0425228 Jy
! Component: 150  -  total flux cleaned = 0.0541518 Jy
! Component: 200  -  total flux cleaned = 0.0624453 Jy
! Total flux subtracted in 200 components = 0.0624453 Jy
! Clean residual min=-0.004666 max=0.006332 Jy/beam
! Clean residual mean=-0.000031 rms=0.001460 Jy/beam
! Combined flux in latest and established models = 0.282672 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 44 components and 0.282672 Jy
! Inverting map 
! Added new window around map position (16.8, 32.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00658695 Jy
! Component: 100  -  total flux cleaned = 0.0112321 Jy
! Component: 150  -  total flux cleaned = 0.0148237 Jy
! Component: 200  -  total flux cleaned = 0.0176632 Jy
! Total flux subtracted in 200 components = 0.0176632 Jy
! Clean residual min=-0.003202 max=0.003470 Jy/beam
! Clean residual mean=-0.000012 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.300335 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 75 components and 0.300335 Jy
! Inverting map 
! Added new window around map position (-16.8, -32.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319129 Jy
! Component: 100  -  total flux cleaned = 0.00507412 Jy
! Component: 150  -  total flux cleaned = 0.00615786 Jy
! Component: 200  -  total flux cleaned = 0.00703894 Jy
! Total flux subtracted in 200 components = 0.00703894 Jy
! Clean residual min=-0.002822 max=0.002117 Jy/beam
! Clean residual mean=-0.000004 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.307374 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 99 components and 0.307374 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.084 mas, bmaj=3.35 mas, bpa=-5.17 degrees
! Estimated noise=0.407861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015272 Jy
! Component: 100  -  total flux cleaned = 0.00199647 Jy
! Component: 150  -  total flux cleaned = 0.00231416 Jy
! Component: 200  -  total flux cleaned = 0.00231439 Jy
! Total flux subtracted in 200 components = 0.00231439 Jy
! Clean residual min=-0.002717 max=0.002125 Jy/beam
! Clean residual mean=-0.000002 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.309689 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.79226e-05 Jy
! Component: 100  -  total flux cleaned = 3.71764e-05 Jy
! Component: 150  -  total flux cleaned = 3.75077e-05 Jy
! Component: 200  -  total flux cleaned = 8.01302e-06 Jy
! Total flux subtracted in 200 components = 8.01302e-06 Jy
! Clean residual min=-0.002546 max=0.001906 Jy/beam
! Clean residual mean=-0.000001 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.309697 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 119 components and 0.309697 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9728 mas, bmaj=1.404 mas, bpa=-2.912 degrees
! Estimated noise=0.340399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105478 Jy
! Component: 100  -  total flux cleaned = 0.000180935 Jy
! Component: 150  -  total flux cleaned = 0.000182697 Jy
! Component: 200  -  total flux cleaned = 0.000123 Jy
! Total flux subtracted in 200 components = 0.000123 Jy
! Clean residual min=-0.002425 max=0.002016 Jy/beam
! Clean residual mean=-0.000000 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.30982 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 139 components and 0.30982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058482Jy  sigma=1.511119
! Fit after  self-cal, rms=0.058452Jy  sigma=1.510575
wmodel /J0429+3319_X_map.mod
! wmodel: Unable to open new model file: /J0429+3319_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0429+3319_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9728 x 1.404 at -2.912 degrees (North through East)
! Clean map  min=-0.0022951  max=0.15907 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0429+3319_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.159073 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000487028 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.918499 0.918499 1.837 3.674 7.34799 14.696 29.392 58.784
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.159 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  326.619 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0429+3319_X_dfm.log closed on Thu May 19 23:51:54 2016