! Started logfile: /scr/pima/bg219a_uvs/J0429+3319_S_uvs.log on Wed Apr 6 22:44:38 2016 obs /scr/pima/bg219a_uvs/J0429+3319_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0429+3319_S_uva.fits ! AN table 1: 36 integrations on 15 of 15 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0429+3319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2160 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0429+3319_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.079606Jy sigma=23.465738 ! Fit after self-cal, rms=0.566028Jy sigma=12.023032 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=4.243 mas, bpa=-5.881 degrees ! Estimated noise=0.995939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.343381 Jy ! Component: 100 - total flux cleaned = 0.435411 Jy ! Total flux subtracted in 100 components = 0.435411 Jy ! Clean residual min=-0.044494 max=0.107124 Jy/beam ! Clean residual mean=-0.000130 rms=0.013396 Jy/beam ! Combined flux in latest and established models = 0.435412 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.435412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153574Jy sigma=3.309783 ! Fit after self-cal, rms=0.153440Jy sigma=3.307070 ! Inverting map ! Added new window around map position (-5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0890721 Jy ! Component: 100 - total flux cleaned = 0.126748 Jy ! Total flux subtracted in 100 components = 0.126748 Jy ! Clean residual min=-0.024343 max=0.046276 Jy/beam ! Clean residual mean=-0.000051 rms=0.006649 Jy/beam ! Combined flux in latest and established models = 0.562159 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.562159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091601Jy sigma=1.954717 ! Fit after self-cal, rms=0.079655Jy sigma=1.677826 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0338625 Jy ! Component: 100 - total flux cleaned = 0.0478401 Jy ! Total flux subtracted in 100 components = 0.0478401 Jy ! Clean residual min=-0.013539 max=0.020989 Jy/beam ! Clean residual mean=-0.000019 rms=0.003446 Jy/beam ! Combined flux in latest and established models = 0.61 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.61 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063453Jy sigma=1.316479 ! Fit after self-cal, rms=0.061285Jy sigma=1.262138 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=5.237 mas, bpa=-5.092 degrees ! Estimated noise=0.755076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157512 Jy ! Component: 100 - total flux cleaned = 0.0199589 Jy ! Component: 150 - total flux cleaned = 0.0215262 Jy ! Component: 200 - total flux cleaned = 0.0222802 Jy ! Total flux subtracted in 200 components = 0.0222802 Jy ! Clean residual min=-0.007893 max=0.010627 Jy/beam ! Clean residual mean=-0.000008 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 0.63228 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.63228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056877Jy sigma=1.164481 ! Fit after self-cal, rms=0.056437Jy sigma=1.151636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 5.237 at -5.092 degrees (North through East) ! Clean map min=-0.0070977 max=0.43385 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.04 NL 0.96 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 1.02 NL 0.98 OV 1.01 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 1.03 NL 0.97 OV 1.02 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 1.03 NL 0.99 OV 1.00 ! PT 0.99 SC 0.98 ! ! ! Fit before self-cal, rms=0.056437Jy sigma=1.151636 ! Fit after self-cal, rms=0.055436Jy sigma=1.123921 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=5.254 mas, bpa=-4.673 degrees ! Estimated noise=0.754943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204375 Jy ! Component: 100 - total flux cleaned = -0.00162176 Jy ! Component: 150 - total flux cleaned = -0.00106112 Jy ! Component: 200 - total flux cleaned = -0.000617123 Jy ! Total flux subtracted in 200 components = -0.000617123 Jy ! Clean residual min=-0.005113 max=0.007284 Jy/beam ! Clean residual mean=-0.000010 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.631663 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.631663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054508Jy sigma=1.104536 ! Fit after self-cal, rms=0.054457Jy sigma=1.102476 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054457Jy sigma=1.102476 ! Fit after self-cal, rms=0.054029Jy sigma=1.087121 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=5.251 mas, bpa=-5.407 degrees ! Estimated noise=0.756551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248607 Jy ! Component: 100 - total flux cleaned = -0.000480576 Jy ! Component: 150 - total flux cleaned = -0.000351985 Jy ! Component: 200 - total flux cleaned = -0.000352137 Jy ! Total flux subtracted in 200 components = -0.000352137 Jy ! Clean residual min=-0.003573 max=0.004958 Jy/beam ! Clean residual mean=0.000003 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.63131 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.631311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053810Jy sigma=1.083428 ! Fit after self-cal, rms=0.053804Jy sigma=1.083255 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90, -125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397747 Jy ! Component: 100 - total flux cleaned = 0.00441227 Jy ! Component: 150 - total flux cleaned = 0.00453164 Jy ! Component: 200 - total flux cleaned = 0.00463947 Jy ! Total flux subtracted in 200 components = 0.00463947 Jy ! Clean residual min=-0.003425 max=0.003707 Jy/beam ! Clean residual mean=0.000001 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.63595 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.63595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053477Jy sigma=1.076161 ! Fit after self-cal, rms=0.053465Jy sigma=1.075715 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053465Jy sigma=1.075715 ! Fit after self-cal, rms=0.053425Jy sigma=1.074386 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=5.25 mas, bpa=-5.686 degrees ! Estimated noise=0.755831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570494 Jy ! Component: 100 - total flux cleaned = 0.000686949 Jy ! Component: 150 - total flux cleaned = 0.000783862 Jy ! Component: 200 - total flux cleaned = 0.000825621 Jy ! Total flux subtracted in 200 components = 0.000825621 Jy ! Clean residual min=-0.003239 max=0.003319 Jy/beam ! Clean residual mean=-0.000003 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.636776 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.636776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053308Jy sigma=1.072382 ! Fit after self-cal, rms=0.053308Jy sigma=1.072330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205296 Jy ! Component: 100 - total flux cleaned = 0.000243625 Jy ! Component: 150 - total flux cleaned = 0.000317201 Jy ! Component: 200 - total flux cleaned = 0.000351302 Jy ! Total flux subtracted in 200 components = 0.000351302 Jy ! Clean residual min=-0.003158 max=0.003265 Jy/beam ! Clean residual mean=-0.000004 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.637127 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.637127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053253Jy sigma=1.071434 ! Fit after self-cal, rms=0.053252Jy sigma=1.071416 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053252Jy sigma=1.071416 ! Fit after self-cal, rms=0.053245Jy sigma=1.071051 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.117 mas, bmaj=12.19 mas, bpa=-2.043 degrees ! Estimated noise=0.944025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868954 Jy ! Component: 100 - total flux cleaned = 0.000946018 Jy ! Component: 150 - total flux cleaned = 0.000943197 Jy ! Component: 200 - total flux cleaned = 0.000970036 Jy ! Total flux subtracted in 200 components = 0.000970036 Jy ! Clean residual min=-0.002760 max=0.003271 Jy/beam ! Clean residual mean=-0.000008 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.638097 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.638097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053228Jy sigma=1.070857 ! Fit after self-cal, rms=0.053227Jy sigma=1.070763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.1653e-05 Jy ! Component: 100 - total flux cleaned = -7.77704e-06 Jy ! Component: 150 - total flux cleaned = 6.05773e-05 Jy ! Component: 200 - total flux cleaned = 0.000102586 Jy ! Total flux subtracted in 200 components = 0.000102586 Jy ! Clean residual min=-0.002725 max=0.003275 Jy/beam ! Clean residual mean=-0.000008 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.6382 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 108 components and 0.638199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053217Jy sigma=1.070707 ! Fit after self-cal, rms=0.053213Jy sigma=1.070654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=5.251 mas, bpa=-5.863 degrees ! Estimated noise=0.755368 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 5.251 at -5.863 degrees (North through East) ! Clean map min=-0.0027625 max=0.43372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=4.254 mas, bpa=-6.976 degrees ! Estimated noise=1.00109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.348979 Jy ! Component: 100 - total flux cleaned = 0.475375 Jy ! Component: 150 - total flux cleaned = 0.535771 Jy ! Component: 200 - total flux cleaned = 0.570468 Jy ! Total flux subtracted in 200 components = 0.570468 Jy ! Clean residual min=-0.013853 max=0.018207 Jy/beam ! Clean residual mean=-0.000037 rms=0.003687 Jy/beam ! Combined flux in latest and established models = 0.570468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.570468 Jy ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=5.251 mas, bpa=-5.863 degrees ! Estimated noise=0.755368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271149 Jy ! Component: 100 - total flux cleaned = 0.0423288 Jy ! Component: 150 - total flux cleaned = 0.0515041 Jy ! Component: 200 - total flux cleaned = 0.0576875 Jy ! Total flux subtracted in 200 components = 0.0576875 Jy ! Clean residual min=-0.005571 max=0.005354 Jy/beam ! Clean residual mean=-0.000002 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.628155 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.628155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.117 mas, bmaj=12.19 mas, bpa=-2.043 degrees ! Estimated noise=0.944025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570048 Jy ! Component: 100 - total flux cleaned = 0.00907926 Jy ! Component: 150 - total flux cleaned = 0.009864 Jy ! Component: 200 - total flux cleaned = 0.0105628 Jy ! Total flux subtracted in 200 components = 0.0105628 Jy ! Clean residual min=-0.003387 max=0.003878 Jy/beam ! Clean residual mean=0.000001 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.638718 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439922 Jy ! Component: 100 - total flux cleaned = 0.000328643 Jy ! Component: 150 - total flux cleaned = 0.000225684 Jy ! Component: 200 - total flux cleaned = 0.000177834 Jy ! Total flux subtracted in 200 components = 0.000177834 Jy ! Clean residual min=-0.002911 max=0.003653 Jy/beam ! Clean residual mean=-0.000000 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.638896 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 54 components and 0.638896 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=5.251 mas, bpa=-5.863 degrees ! Estimated noise=0.755368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101618 Jy ! Component: 100 - total flux cleaned = -0.00141973 Jy ! Component: 150 - total flux cleaned = -0.00132969 Jy ! Component: 200 - total flux cleaned = -0.00124955 Jy ! Total flux subtracted in 200 components = -0.00124955 Jy ! Clean residual min=-0.003537 max=0.003356 Jy/beam ! Clean residual mean=-0.000004 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.637646 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.637646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053551Jy sigma=1.077651 ! Fit after self-cal, rms=0.053494Jy sigma=1.076271 wmodel /scr/pima/bg219a_uvs/J0429+3319_S_map.mod ! Writing 66 model components to file: /scr/pima/bg219a_uvs/J0429+3319_S_map.mod wobs /scr/pima/bg219a_uvs/J0429+3319_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J0429+3319_S_uvs.fits wwins /scr/pima/bg219a_uvs/J0429+3319_S_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219a_uvs/J0429+3319_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000841516 Jy ! Component: 100 - total flux cleaned = -0.00150419 Jy ! Component: 150 - total flux cleaned = -0.00186621 Jy ! Component: 200 - total flux cleaned = -0.00216367 Jy ! Component: 250 - total flux cleaned = -0.00249344 Jy ! Component: 300 - total flux cleaned = -0.00271846 Jy ! Component: 350 - total flux cleaned = -0.00289162 Jy ! Component: 400 - total flux cleaned = -0.00289182 Jy ! Component: 450 - total flux cleaned = -0.00285297 Jy ! Component: 500 - total flux cleaned = -0.00281489 Jy ! Component: 550 - total flux cleaned = -0.00289108 Jy ! Component: 600 - total flux cleaned = -0.00296435 Jy ! Component: 650 - total flux cleaned = -0.00306947 Jy ! Component: 700 - total flux cleaned = -0.0031371 Jy ! Component: 750 - total flux cleaned = -0.00323547 Jy ! Component: 800 - total flux cleaned = -0.00333188 Jy ! Component: 850 - total flux cleaned = -0.00348675 Jy ! Component: 900 - total flux cleaned = -0.00357693 Jy ! Component: 950 - total flux cleaned = -0.00360727 Jy ! Component: 1000 - total flux cleaned = -0.00363657 Jy ! Component: 1050 - total flux cleaned = -0.00363631 Jy ! Component: 1100 - total flux cleaned = -0.00369129 Jy ! Component: 1150 - total flux cleaned = -0.00361111 Jy ! Component: 1200 - total flux cleaned = -0.00369102 Jy ! Component: 1250 - total flux cleaned = -0.00369127 Jy ! Component: 1300 - total flux cleaned = -0.00381762 Jy ! Component: 1350 - total flux cleaned = -0.00389161 Jy ! Component: 1400 - total flux cleaned = -0.00386714 Jy ! Component: 1450 - total flux cleaned = -0.00393865 Jy ! Component: 1500 - total flux cleaned = -0.00405522 Jy ! Component: 1550 - total flux cleaned = -0.00412428 Jy ! Component: 1600 - total flux cleaned = -0.00416949 Jy ! Component: 1650 - total flux cleaned = -0.00421376 Jy ! Component: 1700 - total flux cleaned = -0.00425786 Jy ! Component: 1750 - total flux cleaned = -0.0043445 Jy ! Component: 1800 - total flux cleaned = -0.00449333 Jy ! Component: 1850 - total flux cleaned = -0.00459764 Jy ! Component: 1900 - total flux cleaned = -0.00463877 Jy ! Component: 1950 - total flux cleaned = -0.00480115 Jy ! Component: 2000 - total flux cleaned = -0.00484123 Jy ! Component: 2050 - total flux cleaned = -0.00491995 Jy ! Component: 2100 - total flux cleaned = -0.00499793 Jy ! Component: 2150 - total flux cleaned = -0.0050743 Jy ! Component: 2200 - total flux cleaned = -0.00518729 Jy ! Component: 2250 - total flux cleaned = -0.00528041 Jy ! Component: 2300 - total flux cleaned = -0.0053534 Jy ! Component: 2350 - total flux cleaned = -0.00540755 Jy ! Component: 2400 - total flux cleaned = -0.0054429 Jy ! Component: 2450 - total flux cleaned = -0.0054605 Jy ! Component: 2500 - total flux cleaned = -0.00553053 Jy ! Component: 2550 - total flux cleaned = -0.00559925 Jy ! Component: 2600 - total flux cleaned = -0.00561646 Jy ! Component: 2650 - total flux cleaned = -0.00570083 Jy ! Component: 2700 - total flux cleaned = -0.00576767 Jy ! Component: 2750 - total flux cleaned = -0.00583352 Jy ! Component: 2800 - total flux cleaned = -0.00586631 Jy ! Component: 2850 - total flux cleaned = -0.00593136 Jy ! Component: 2900 - total flux cleaned = -0.00602758 Jy ! Component: 2950 - total flux cleaned = -0.00605943 Jy ! Component: 3000 - total flux cleaned = -0.0061383 Jy ! Component: 3050 - total flux cleaned = -0.00623219 Jy ! Component: 3100 - total flux cleaned = -0.00627879 Jy ! Component: 3150 - total flux cleaned = -0.00637136 Jy ! Component: 3200 - total flux cleaned = -0.00649362 Jy ! Component: 3250 - total flux cleaned = -0.00656958 Jy ! Component: 3300 - total flux cleaned = -0.00667513 Jy ! Component: 3350 - total flux cleaned = -0.00670518 Jy ! Component: 3400 - total flux cleaned = -0.00680956 Jy ! Component: 3450 - total flux cleaned = -0.00685414 Jy ! Component: 3500 - total flux cleaned = -0.00692796 Jy ! Component: 3550 - total flux cleaned = -0.00704549 Jy ! Component: 3600 - total flux cleaned = -0.00714798 Jy ! Component: 3650 - total flux cleaned = -0.00725012 Jy ! Component: 3700 - total flux cleaned = -0.0073229 Jy ! Component: 3750 - total flux cleaned = -0.0073956 Jy ! Component: 3800 - total flux cleaned = -0.00745373 Jy ! Component: 3850 - total flux cleaned = -0.00751175 Jy ! Component: 3900 - total flux cleaned = -0.00758416 Jy ! Component: 3950 - total flux cleaned = -0.00765642 Jy ! Component: 4000 - total flux cleaned = -0.00771429 Jy ! Component: 4050 - total flux cleaned = -0.00780096 Jy ! Total flux subtracted in 4096 components = -0.00787305 Jy ! Clean residual min=-0.000906 max=0.001072 Jy/beam ! Clean residual mean=-0.000004 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.629773 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 324 components and 0.629773 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J0429+3319_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 5.251 at -5.863 degrees (North through East) ! Clean map min=-0.0016919 max=0.42723 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0429+3319_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.427228 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222866 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.156497 0.156497 0.312993 0.625987 1.25197 2.50395 5.0079 10.0158 20.0316 40.0632 80.1263 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.427 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1916.97 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0429+3319_S_uvs.log closed on Wed Apr 6 22:44:43 2016