! Started logfile: /scr/pima/bg219a_uvs/J0419-2132_S_dfm.log on Thu May 19 23:51:25 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0419-2132_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0419-2132_S_uva.fits
! AN table 1: 62 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0419-2132
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3720 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0419-2132_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014964Jy  sigma=21.895071
! Fit after  self-cal, rms=0.877805Jy  sigma=18.925908
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.116 mas, bmaj=5.832 mas, bpa=-5.035 degrees
! Estimated noise=0.895323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0941469 Jy
! Component: 100  -  total flux cleaned = 0.11496 Jy
! Total flux subtracted in 100 components = 0.11496 Jy
! Clean residual min=-0.006837 max=0.007901 Jy/beam
! Clean residual mean=-0.000029 rms=0.001754 Jy/beam
! Combined flux in latest and established models = 0.11496 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.11496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062474Jy  sigma=1.289693
! Fit after  self-cal, rms=0.062468Jy  sigma=1.289568
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.532 mas, bmaj=6.865 mas, bpa=-5.106 degrees
! Estimated noise=0.572627 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120381 Jy
! Component: 100  -  total flux cleaned = 0.0182569 Jy
! Component: 150  -  total flux cleaned = 0.0215755 Jy
! Component: 200  -  total flux cleaned = 0.0233541 Jy
! Total flux subtracted in 200 components = 0.0233541 Jy
! Clean residual min=-0.003013 max=0.003062 Jy/beam
! Clean residual mean=-0.000002 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.138314 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.138314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060395Jy  sigma=1.237043
! Fit after  self-cal, rms=0.060433Jy  sigma=1.236345
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.532 x 6.865 at -5.106 degrees (North through East)
! Clean map  min=-0.0029221  max=0.12451 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.99     NL        0.96     OV        1.04     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.94     OV        1.03     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.02     NL        0.97     OV        1.03     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.03     NL        0.95     OV        1.02     
!   PT        0.98     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.060433Jy  sigma=1.236345
! Fit after  self-cal, rms=0.059843Jy  sigma=1.231471
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.541 mas, bmaj=6.874 mas, bpa=-5.113 degrees
! Estimated noise=0.569847 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165435 Jy
! Component: 100  -  total flux cleaned = -9.87915e-05 Jy
! Component: 150  -  total flux cleaned = -4.47834e-05 Jy
! Component: 200  -  total flux cleaned = -9.83537e-06 Jy
! Total flux subtracted in 200 components = -9.83537e-06 Jy
! Clean residual min=-0.002480 max=0.002353 Jy/beam
! Clean residual mean=-0.000005 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.138304 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 22 components and 0.138304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059834Jy  sigma=1.231299
! Fit after  self-cal, rms=0.059842Jy  sigma=1.231176
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059842Jy  sigma=1.231176
! Fit after  self-cal, rms=0.059846Jy  sigma=1.230384
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.541 mas, bmaj=6.872 mas, bpa=-5.087 degrees
! Estimated noise=0.570476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.60121e-05 Jy
! Component: 100  -  total flux cleaned = 4.97256e-05 Jy
! Component: 150  -  total flux cleaned = 0.000104948 Jy
! Component: 200  -  total flux cleaned = 0.000124531 Jy
! Total flux subtracted in 200 components = 0.000124531 Jy
! Clean residual min=-0.002508 max=0.002371 Jy/beam
! Clean residual mean=-0.000005 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.138429 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 24 components and 0.138429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059841Jy  sigma=1.230287
! Fit after  self-cal, rms=0.059840Jy  sigma=1.230272
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.964e-05 Jy
! Component: 100  -  total flux cleaned = -3.0146e-05 Jy
! Component: 150  -  total flux cleaned = -1.23961e-05 Jy
! Component: 200  -  total flux cleaned = 1.21458e-05 Jy
! Total flux subtracted in 200 components = 1.21458e-05 Jy
! Clean residual min=-0.002479 max=0.002348 Jy/beam
! Clean residual mean=-0.000005 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.138441 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 0.138441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059837Jy  sigma=1.230211
! Fit after  self-cal, rms=0.059836Jy  sigma=1.230203
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059836Jy  sigma=1.230203
! Fit after  self-cal, rms=0.059620Jy  sigma=1.228910
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.54 mas, bmaj=6.863 mas, bpa=-5.148 degrees
! Estimated noise=0.569679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173672 Jy
! Component: 100  -  total flux cleaned = 0.000182511 Jy
! Component: 150  -  total flux cleaned = 0.000182076 Jy
! Component: 200  -  total flux cleaned = 0.000181549 Jy
! Total flux subtracted in 200 components = 0.000181549 Jy
! Clean residual min=-0.002788 max=0.002546 Jy/beam
! Clean residual mean=-0.000003 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.138622 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 31 components and 0.138622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059617Jy  sigma=1.228856
! Fit after  self-cal, rms=0.059617Jy  sigma=1.228830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.5848e-05 Jy
! Component: 100  -  total flux cleaned = -3.25166e-05 Jy
! Component: 150  -  total flux cleaned = -3.2371e-05 Jy
! Component: 200  -  total flux cleaned = -3.79156e-05 Jy
! Total flux subtracted in 200 components = -3.79156e-05 Jy
! Clean residual min=-0.002770 max=0.002538 Jy/beam
! Clean residual mean=-0.000003 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.138584 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 35 components and 0.138584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059616Jy  sigma=1.228803
! Fit after  self-cal, rms=0.059615Jy  sigma=1.228800
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059615Jy  sigma=1.228800
! Fit after  self-cal, rms=0.059566Jy  sigma=1.228816
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.815 mas, bmaj=19.35 mas, bpa=-5.033 degrees
! Estimated noise=0.79231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000482362 Jy
! Component: 100  -  total flux cleaned = 0.000484823 Jy
! Component: 150  -  total flux cleaned = 0.000485973 Jy
! Component: 200  -  total flux cleaned = 0.000486681 Jy
! Total flux subtracted in 200 components = 0.000486681 Jy
! Clean residual min=-0.002863 max=0.002747 Jy/beam
! Clean residual mean=-0.000006 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.139071 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 37 components and 0.139071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059578Jy  sigma=1.228941
! Fit after  self-cal, rms=0.059572Jy  sigma=1.228883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.71009e-05 Jy
! Component: 100  -  total flux cleaned = 4.76531e-05 Jy
! Component: 150  -  total flux cleaned = 4.74341e-05 Jy
! Component: 200  -  total flux cleaned = 4.70658e-05 Jy
! Total flux subtracted in 200 components = 4.70658e-05 Jy
! Clean residual min=-0.002826 max=0.002745 Jy/beam
! Clean residual mean=-0.000006 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.139118 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.139118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059588Jy  sigma=1.229137
! Fit after  self-cal, rms=0.059583Jy  sigma=1.229105
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=6.861 mas, bpa=-5.172 degrees
! Estimated noise=0.569435 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.538 x 6.861 at -5.172 degrees (North through East)
! Clean map  min=-0.002451  max=0.12434 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.121 mas, bmaj=5.822 mas, bpa=-5.064 degrees
! Estimated noise=0.889735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0934478 Jy
! Component: 100  -  total flux cleaned = 0.114092 Jy
! Component: 150  -  total flux cleaned = 0.122237 Jy
! Component: 200  -  total flux cleaned = 0.127455 Jy
! Total flux subtracted in 200 components = 0.127455 Jy
! Clean residual min=-0.004556 max=0.004906 Jy/beam
! Clean residual mean=-0.000015 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.127455 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.127455 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=6.861 mas, bpa=-5.172 degrees
! Estimated noise=0.569435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00582433 Jy
! Component: 100  -  total flux cleaned = 0.00889075 Jy
! Component: 150  -  total flux cleaned = 0.010709 Jy
! Component: 200  -  total flux cleaned = 0.0118831 Jy
! Total flux subtracted in 200 components = 0.0118831 Jy
! Clean residual min=-0.002823 max=0.002367 Jy/beam
! Clean residual mean=-0.000003 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.139338 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 38 components and 0.139338 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.815 mas, bmaj=19.35 mas, bpa=-5.033 degrees
! Estimated noise=0.79231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100456 Jy
! Component: 100  -  total flux cleaned = 0.00107004 Jy
! Component: 150  -  total flux cleaned = 0.00107208 Jy
! Component: 200  -  total flux cleaned = 0.00105925 Jy
! Total flux subtracted in 200 components = 0.00105925 Jy
! Clean residual min=-0.002582 max=0.002524 Jy/beam
! Clean residual mean=0.000000 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 0.140397 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.43409e-05 Jy
! Component: 100  -  total flux cleaned = -3.62547e-05 Jy
! Component: 150  -  total flux cleaned = -5.87399e-05 Jy
! Component: 200  -  total flux cleaned = -8.03135e-05 Jy
! Total flux subtracted in 200 components = -8.03135e-05 Jy
! Clean residual min=-0.002565 max=0.002492 Jy/beam
! Clean residual mean=0.000000 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.140317 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.140317 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=6.861 mas, bpa=-5.172 degrees
! Estimated noise=0.569435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000210134 Jy
! Component: 100  -  total flux cleaned = 0.000184944 Jy
! Component: 150  -  total flux cleaned = 0.000183908 Jy
! Component: 200  -  total flux cleaned = 0.000168377 Jy
! Total flux subtracted in 200 components = 0.000168377 Jy
! Clean residual min=-0.002643 max=0.002340 Jy/beam
! Clean residual mean=0.000001 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.140485 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.140485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059535Jy  sigma=1.228238
! Fit after  self-cal, rms=0.059534Jy  sigma=1.228147
wmodel /J0419-2132_S_map.mod
! wmodel: Unable to open new model file: /J0419-2132_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0419-2132_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.538 x 6.861 at -5.172 degrees (North through East)
! Clean map  min=-0.0024012  max=0.12287 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0419-2132_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.122873 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000591067 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.44311 1.44311 2.88622 5.77245 11.5449 23.0898 46.1796 92.3591
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.122 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  207.884 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0419-2132_S_dfm.log closed on Thu May 19 23:51:27 2016