! Started logfile: /scr/pima/bg219a_uvs/J0413-0615_S_dfm.log on Thu May 19 23:51:10 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0413-0615_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0413-0615_S_uva.fits ! AN table 1: 62 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0413-0615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2976 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0413-0615_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997784Jy sigma=23.434844 ! Fit after self-cal, rms=0.945571Jy sigma=22.219408 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=7.4 mas, bpa=-10.17 degrees ! Estimated noise=0.843186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429675 Jy ! Component: 100 - total flux cleaned = 0.0528051 Jy ! Total flux subtracted in 100 components = 0.0528051 Jy ! Clean residual min=-0.003705 max=0.003405 Jy/beam ! Clean residual mean=-0.000006 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0528051 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0528051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054826Jy sigma=1.212785 ! Fit after self-cal, rms=0.054259Jy sigma=1.202254 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=8.66 mas, bpa=-11.34 degrees ! Estimated noise=0.588273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394466 Jy ! Component: 100 - total flux cleaned = 0.00531364 Jy ! Component: 150 - total flux cleaned = 0.00597354 Jy ! Component: 200 - total flux cleaned = 0.00613905 Jy ! Total flux subtracted in 200 components = 0.00613905 Jy ! Clean residual min=-0.002586 max=0.002677 Jy/beam ! Clean residual mean=-0.000007 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0589442 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.0589442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054013Jy sigma=1.196121 ! Fit after self-cal, rms=0.054027Jy sigma=1.196041 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.568 x 8.66 at -11.34 degrees (North through East) ! Clean map min=-0.0025802 max=0.056245 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.97 MK 1.05 NL 0.93 OV 1.00 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.93 MK 1.05 NL 1.06 OV 1.06 ! PT 0.95 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.07 MK 1.02 NL 0.89 OV 1.06 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.06 MK 0.90 NL 1.09 OV 0.94 ! PT 1.04 SC 0.87 ! ! ! Fit before self-cal, rms=0.054027Jy sigma=1.196041 ! Fit after self-cal, rms=0.054581Jy sigma=1.191437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=8.64 mas, bpa=-11.27 degrees ! Estimated noise=0.587433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205926 Jy ! Component: 100 - total flux cleaned = 0.000231124 Jy ! Component: 150 - total flux cleaned = 0.000218857 Jy ! Component: 200 - total flux cleaned = 0.000218462 Jy ! Total flux subtracted in 200 components = 0.000218462 Jy ! Clean residual min=-0.002520 max=0.002505 Jy/beam ! Clean residual mean=-0.000010 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0591627 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0591627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054574Jy sigma=1.191316 ! Fit after self-cal, rms=0.054652Jy sigma=1.190798 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054652Jy sigma=1.190798 ! Fit after self-cal, rms=0.054445Jy sigma=1.187509 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=8.592 mas, bpa=-11.25 degrees ! Estimated noise=0.586645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293098 Jy ! Component: 100 - total flux cleaned = -0.000320505 Jy ! Component: 150 - total flux cleaned = -0.0003325 Jy ! Component: 200 - total flux cleaned = -0.000342935 Jy ! Total flux subtracted in 200 components = -0.000342935 Jy ! Clean residual min=-0.002263 max=0.002168 Jy/beam ! Clean residual mean=-0.000007 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0588197 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0588197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054437Jy sigma=1.187399 ! Fit after self-cal, rms=0.054475Jy sigma=1.187042 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.54574e-05 Jy ! Component: 100 - total flux cleaned = -3.45857e-05 Jy ! Component: 150 - total flux cleaned = -3.45201e-05 Jy ! Component: 200 - total flux cleaned = -4.30885e-05 Jy ! Total flux subtracted in 200 components = -4.30885e-05 Jy ! Clean residual min=-0.002300 max=0.002190 Jy/beam ! Clean residual mean=-0.000008 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0587766 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.0587766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054470Jy sigma=1.186982 ! Fit after self-cal, rms=0.054472Jy sigma=1.186973 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054472Jy sigma=1.186973 ! Fit after self-cal, rms=0.054331Jy sigma=1.186877 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=8.572 mas, bpa=-11.18 degrees ! Estimated noise=0.585104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240254 Jy ! Component: 100 - total flux cleaned = -0.000273259 Jy ! Component: 150 - total flux cleaned = -0.000282629 Jy ! Component: 200 - total flux cleaned = -0.000291477 Jy ! Total flux subtracted in 200 components = -0.000291477 Jy ! Clean residual min=-0.002232 max=0.002136 Jy/beam ! Clean residual mean=-0.000007 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0584852 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.0584852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054325Jy sigma=1.186809 ! Fit after self-cal, rms=0.054335Jy sigma=1.186787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.10998e-05 Jy ! Component: 100 - total flux cleaned = -7.23321e-05 Jy ! Component: 150 - total flux cleaned = -6.4658e-05 Jy ! Component: 200 - total flux cleaned = -5.77358e-05 Jy ! Total flux subtracted in 200 components = -5.77358e-05 Jy ! Clean residual min=-0.002245 max=0.002133 Jy/beam ! Clean residual mean=-0.000007 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0584274 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.0584274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054332Jy sigma=1.186752 ! Fit after self-cal, rms=0.054334Jy sigma=1.186744 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054334Jy sigma=1.186744 ! Fit after self-cal, rms=0.054176Jy sigma=1.186710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.489 mas, bmaj=18.33 mas, bpa=-13.52 degrees ! Estimated noise=0.733966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001694 Jy ! Component: 100 - total flux cleaned = -0.000170134 Jy ! Component: 150 - total flux cleaned = -0.00016441 Jy ! Component: 200 - total flux cleaned = -0.000164299 Jy ! Total flux subtracted in 200 components = -0.000164299 Jy ! Clean residual min=-0.002540 max=0.002094 Jy/beam ! Clean residual mean=-0.000014 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.0582631 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 60 components and 0.0582631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054174Jy sigma=1.186691 ! Fit after self-cal, rms=0.054174Jy sigma=1.186663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70186e-06 Jy ! Component: 100 - total flux cleaned = 2.46097e-06 Jy ! Component: 150 - total flux cleaned = 8.11938e-06 Jy ! Component: 200 - total flux cleaned = 1.24085e-05 Jy ! Total flux subtracted in 200 components = 1.24085e-05 Jy ! Clean residual min=-0.002540 max=0.002092 Jy/beam ! Clean residual mean=-0.000014 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.0582755 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.0582755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054173Jy sigma=1.186659 ! Fit after self-cal, rms=0.054173Jy sigma=1.186635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=8.558 mas, bpa=-11.13 degrees ! Estimated noise=0.583815 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.57 x 8.558 at -11.13 degrees (North through East) ! Clean map min=-0.0021678 max=0.056274 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=7.285 mas, bpa=-9.971 degrees ! Estimated noise=0.827829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425399 Jy ! Component: 100 - total flux cleaned = 0.0524648 Jy ! Component: 150 - total flux cleaned = 0.0558043 Jy ! Component: 200 - total flux cleaned = 0.0567656 Jy ! Total flux subtracted in 200 components = 0.0567656 Jy ! Clean residual min=-0.003731 max=0.003001 Jy/beam ! Clean residual mean=-0.000005 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0567656 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0567656 Jy ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=8.558 mas, bpa=-11.13 degrees ! Estimated noise=0.583815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011963 Jy ! Component: 100 - total flux cleaned = 0.00125749 Jy ! Component: 150 - total flux cleaned = 0.00139965 Jy ! Component: 200 - total flux cleaned = 0.00143904 Jy ! Total flux subtracted in 200 components = 0.00143904 Jy ! Clean residual min=-0.002272 max=0.002078 Jy/beam ! Clean residual mean=-0.000007 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0582046 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.0582046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.489 mas, bmaj=18.33 mas, bpa=-13.52 degrees ! Estimated noise=0.733966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205362 Jy ! Component: 100 - total flux cleaned = 0.000219695 Jy ! Component: 150 - total flux cleaned = 0.000219954 Jy ! Component: 200 - total flux cleaned = 0.000227596 Jy ! Total flux subtracted in 200 components = 0.000227596 Jy ! Clean residual min=-0.002555 max=0.002089 Jy/beam ! Clean residual mean=-0.000013 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0584322 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.55397e-07 Jy ! Component: 100 - total flux cleaned = -5.40707e-06 Jy ! Component: 150 - total flux cleaned = -1.01526e-05 Jy ! Component: 200 - total flux cleaned = -1.49775e-05 Jy ! Total flux subtracted in 200 components = -1.49775e-05 Jy ! Clean residual min=-0.002543 max=0.002088 Jy/beam ! Clean residual mean=-0.000013 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0584172 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0584172 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=8.558 mas, bpa=-11.13 degrees ! Estimated noise=0.583815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47237e-05 Jy ! Component: 100 - total flux cleaned = 1.57678e-05 Jy ! Component: 150 - total flux cleaned = -1.11862e-05 Jy ! Component: 200 - total flux cleaned = -2.33835e-05 Jy ! Total flux subtracted in 200 components = -2.33835e-05 Jy ! Clean residual min=-0.002213 max=0.002126 Jy/beam ! Clean residual mean=-0.000007 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0583938 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.0583938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054181Jy sigma=1.186824 ! Fit after self-cal, rms=0.054187Jy sigma=1.186794 wmodel /J0413-0615_S_map.mod ! wmodel: Unable to open new model file: /J0413-0615_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0413-0615_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.57 x 8.558 at -11.13 degrees (North through East) ! Clean map min=-0.0021564 max=0.055631 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0413-0615_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0556312 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000548166 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.95607 2.95607 5.91214 11.8243 23.6486 47.2971 94.5942 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 101.486 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0413-0615_S_dfm.log closed on Thu May 19 23:51:12 2016