! Started logfile: /scr/pima/bg219a_uvs/J0406-2355_X_dfm.log on Thu May 19 23:51:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0406-2355_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0406-2355_X_uva.fits
! AN table 1: 42 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0406-2355
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7560 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0406-2355_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005342Jy  sigma=26.003947
! Fit after  self-cal, rms=0.905466Jy  sigma=23.317818
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5466 mas, bmaj=1.523 mas, bpa=-0.7474 degrees
! Estimated noise=0.611544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.071043 Jy
! Component: 100  -  total flux cleaned = 0.0886042 Jy
! Total flux subtracted in 100 components = 0.0886042 Jy
! Clean residual min=-0.007620 max=0.007514 Jy/beam
! Clean residual mean=-0.000007 rms=0.001398 Jy/beam
! Combined flux in latest and established models = 0.0886042 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0886042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057916Jy  sigma=1.421552
! Fit after  self-cal, rms=0.057745Jy  sigma=1.416422
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00877017 Jy
! Component: 100  -  total flux cleaned = 0.0136261 Jy
! Total flux subtracted in 100 components = 0.0136261 Jy
! Clean residual min=-0.005305 max=0.004973 Jy/beam
! Clean residual mean=-0.000006 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.10223 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.10223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055886Jy  sigma=1.355752
! Fit after  self-cal, rms=0.055913Jy  sigma=1.355143
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6884 mas, bmaj=1.817 mas, bpa=-0.8643 degrees
! Estimated noise=0.328097 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573835 Jy
! Component: 100  -  total flux cleaned = 0.00860952 Jy
! Component: 150  -  total flux cleaned = 0.0101046 Jy
! Component: 200  -  total flux cleaned = 0.0106065 Jy
! Total flux subtracted in 200 components = 0.0106065 Jy
! Clean residual min=-0.003375 max=0.005607 Jy/beam
! Clean residual mean=-0.000022 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.112837 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 24 components and 0.112837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055394Jy  sigma=1.339607
! Fit after  self-cal, rms=0.055417Jy  sigma=1.338885
! Inverting map 
! Added new window around map position (-1.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.005236 Jy
! Component: 100  -  total flux cleaned = 0.00753546 Jy
! Component: 150  -  total flux cleaned = 0.0088751 Jy
! Component: 200  -  total flux cleaned = 0.0094529 Jy
! Total flux subtracted in 200 components = 0.0094529 Jy
! Clean residual min=-0.002390 max=0.002926 Jy/beam
! Clean residual mean=-0.000010 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.12229 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 45 components and 0.12229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054990Jy  sigma=1.325540
! Fit after  self-cal, rms=0.054938Jy  sigma=1.323815
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6884 x 1.817 at -0.8643 degrees (North through East)
! Clean map  min=-0.0020672  max=0.097099 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.03     OV        1.02     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.02     NL        0.99     OV        1.04     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.97     NL        1.03     OV        1.09     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        0.95     NL        1.02     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.94     NL        1.05     OV        1.07     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.00     NL        0.98     OV        1.08     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.06     NL        0.97     OV        1.03     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.97     NL        0.98     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.03     NL        1.00     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.00     NL        1.04     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        0.95     OV        1.09     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.94     NL        0.99     OV        1.01     
!   PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.054938Jy  sigma=1.323815
! Fit after  self-cal, rms=0.054305Jy  sigma=1.318264
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6874 mas, bmaj=1.816 mas, bpa=-1.016 degrees
! Estimated noise=0.326816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067324 Jy
! Component: 100  -  total flux cleaned = 0.00070686 Jy
! Component: 150  -  total flux cleaned = 0.000706448 Jy
! Component: 200  -  total flux cleaned = 0.000728725 Jy
! Total flux subtracted in 200 components = 0.000728725 Jy
! Clean residual min=-0.001844 max=0.001581 Jy/beam
! Clean residual mean=-0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.123018 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 53 components and 0.123018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054272Jy  sigma=1.317512
! Fit after  self-cal, rms=0.054269Jy  sigma=1.317366
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054269Jy  sigma=1.317366
! Fit after  self-cal, rms=0.054187Jy  sigma=1.315581
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6866 mas, bmaj=1.815 mas, bpa=-1.061 degrees
! Estimated noise=0.326876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329129 Jy
! Component: 100  -  total flux cleaned = 0.000328204 Jy
! Component: 150  -  total flux cleaned = 0.000328295 Jy
! Component: 200  -  total flux cleaned = 0.00034271 Jy
! Total flux subtracted in 200 components = 0.00034271 Jy
! Clean residual min=-0.001717 max=0.001498 Jy/beam
! Clean residual mean=-0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.123361 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 58 components and 0.123361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054176Jy  sigma=1.315355
! Fit after  self-cal, rms=0.054177Jy  sigma=1.315337
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011867 Jy
! Component: 100  -  total flux cleaned = 0.000142414 Jy
! Component: 150  -  total flux cleaned = 0.00016418 Jy
! Component: 200  -  total flux cleaned = 0.00018425 Jy
! Total flux subtracted in 200 components = 0.00018425 Jy
! Clean residual min=-0.001684 max=0.001516 Jy/beam
! Clean residual mean=-0.000001 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.123545 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 62 components and 0.123545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054172Jy  sigma=1.315246
! Fit after  self-cal, rms=0.054173Jy  sigma=1.315242
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054173Jy  sigma=1.315242
! Fit after  self-cal, rms=0.054173Jy  sigma=1.312208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6861 mas, bmaj=1.816 mas, bpa=-1.061 degrees
! Estimated noise=0.32642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.55487e-05 Jy
! Component: 100  -  total flux cleaned = 7.96894e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109267 Jy
! Component: 200  -  total flux cleaned = 0.000109286 Jy
! Total flux subtracted in 200 components = 0.000109286 Jy
! Clean residual min=-0.001570 max=0.001400 Jy/beam
! Clean residual mean=-0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.123655 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 0.123655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054168Jy  sigma=1.312127
! Fit after  self-cal, rms=0.054180Jy  sigma=1.312056
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.7977e-05 Jy
! Component: 100  -  total flux cleaned = -1.77238e-05 Jy
! Component: 150  -  total flux cleaned = -2.58114e-05 Jy
! Component: 200  -  total flux cleaned = -3.34686e-05 Jy
! Total flux subtracted in 200 components = -3.34686e-05 Jy
! Clean residual min=-0.001574 max=0.001386 Jy/beam
! Clean residual mean=-0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.123621 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 68 components and 0.123621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054178Jy  sigma=1.312011
! Fit after  self-cal, rms=0.054178Jy  sigma=1.312008
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054178Jy  sigma=1.312008
! Fit after  self-cal, rms=0.054149Jy  sigma=1.311988
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.946 mas, bmaj=6.207 mas, bpa=-2.782 degrees
! Estimated noise=0.447564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144072 Jy
! Component: 100  -  total flux cleaned = 0.000156348 Jy
! Component: 150  -  total flux cleaned = 0.000172304 Jy
! Component: 200  -  total flux cleaned = 0.000185895 Jy
! Total flux subtracted in 200 components = 0.000185895 Jy
! Clean residual min=-0.001230 max=0.001182 Jy/beam
! Clean residual mean=-0.000004 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.123807 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 75 components and 0.123807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054149Jy  sigma=1.311984
! Fit after  self-cal, rms=0.054149Jy  sigma=1.311979
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.41849e-06 Jy
! Component: 100  -  total flux cleaned = 1.61595e-05 Jy
! Component: 150  -  total flux cleaned = 1.6194e-05 Jy
! Component: 200  -  total flux cleaned = 1.61957e-05 Jy
! Total flux subtracted in 200 components = 1.61957e-05 Jy
! Clean residual min=-0.001220 max=0.001180 Jy/beam
! Clean residual mean=-0.000004 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.123823 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 82 components and 0.123823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054149Jy  sigma=1.311978
! Fit after  self-cal, rms=0.054149Jy  sigma=1.311977
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6857 mas, bmaj=1.815 mas, bpa=-1.061 degrees
! Estimated noise=0.326206 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6857 x 1.815 at -1.061 degrees (North through East)
! Clean map  min=-0.0013805  max=0.09687 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5447 mas, bmaj=1.523 mas, bpa=-0.9587 degrees
! Estimated noise=0.605813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.070095 Jy
! Component: 100  -  total flux cleaned = 0.0881893 Jy
! Component: 150  -  total flux cleaned = 0.0973713 Jy
! Component: 200  -  total flux cleaned = 0.103275 Jy
! Total flux subtracted in 200 components = 0.103275 Jy
! Clean residual min=-0.004401 max=0.004461 Jy/beam
! Clean residual mean=-0.000004 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.103275 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.103275 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6857 mas, bmaj=1.815 mas, bpa=-1.061 degrees
! Estimated noise=0.326206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00704452 Jy
! Component: 100  -  total flux cleaned = 0.0110388 Jy
! Component: 150  -  total flux cleaned = 0.0136492 Jy
! Component: 200  -  total flux cleaned = 0.0155595 Jy
! Total flux subtracted in 200 components = 0.0155595 Jy
! Clean residual min=-0.002076 max=0.001886 Jy/beam
! Clean residual mean=-0.000007 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.118835 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 41 components and 0.118835 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.946 mas, bmaj=6.207 mas, bpa=-2.782 degrees
! Estimated noise=0.447564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228282 Jy
! Component: 100  -  total flux cleaned = 0.00352568 Jy
! Component: 150  -  total flux cleaned = 0.0042623 Jy
! Component: 200  -  total flux cleaned = 0.00450128 Jy
! Total flux subtracted in 200 components = 0.00450128 Jy
! Clean residual min=-0.001354 max=0.001291 Jy/beam
! Clean residual mean=-0.000006 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.123336 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111843 Jy
! Component: 100  -  total flux cleaned = 0.000208443 Jy
! Component: 150  -  total flux cleaned = 0.000269533 Jy
! Component: 200  -  total flux cleaned = 0.000324413 Jy
! Total flux subtracted in 200 components = 0.000324413 Jy
! Clean residual min=-0.001288 max=0.001146 Jy/beam
! Clean residual mean=-0.000005 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.12366 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 58 components and 0.12366 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6857 mas, bmaj=1.815 mas, bpa=-1.061 degrees
! Estimated noise=0.326206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214849 Jy
! Component: 100  -  total flux cleaned = 0.0002786 Jy
! Component: 150  -  total flux cleaned = 0.00027939 Jy
! Component: 200  -  total flux cleaned = 0.000300164 Jy
! Total flux subtracted in 200 components = 0.000300164 Jy
! Clean residual min=-0.001548 max=0.001497 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.12396 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 64 components and 0.12396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054168Jy  sigma=1.312329
! Fit after  self-cal, rms=0.054164Jy  sigma=1.312260
wmodel /J0406-2355_X_map.mod
! wmodel: Unable to open new model file: /J0406-2355_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0406-2355_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6857 x 1.815 at -1.061 degrees (North through East)
! Clean map  min=-0.0013879  max=0.096274 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0406-2355_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0962737 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00034222 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0664 1.0664 2.13279 4.26558 8.53117 17.0623 34.1247 68.2494
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  281.321 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0406-2355_X_dfm.log closed on Thu May 19 23:51:09 2016