! Started logfile: /scr/pima/bg219a_uvs/J0406-2355_S_dfm.log on Thu May 19 23:51:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0406-2355_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0406-2355_S_uva.fits
! AN table 1: 42 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J0406-2355
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2352 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0406-2355_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009867Jy  sigma=21.931453
! Fit after  self-cal, rms=0.918113Jy  sigma=19.800210
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.426 mas, bmaj=5.684 mas, bpa=-7.18 degrees
! Estimated noise=0.903159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0635584 Jy
! Component: 100  -  total flux cleaned = 0.0805663 Jy
! Total flux subtracted in 100 components = 0.0805663 Jy
! Clean residual min=-0.006070 max=0.006684 Jy/beam
! Clean residual mean=-0.000023 rms=0.001477 Jy/beam
! Combined flux in latest and established models = 0.0805663 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0805663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059790Jy  sigma=1.245948
! Fit after  self-cal, rms=0.059551Jy  sigma=1.240125
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.868 mas, bmaj=6.744 mas, bpa=-5.924 degrees
! Estimated noise=0.699545 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0092342 Jy
! Component: 100  -  total flux cleaned = 0.0136657 Jy
! Component: 150  -  total flux cleaned = 0.0159714 Jy
! Component: 200  -  total flux cleaned = 0.0171775 Jy
! Total flux subtracted in 200 components = 0.0171775 Jy
! Clean residual min=-0.003588 max=0.004431 Jy/beam
! Clean residual mean=-0.000003 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.0977438 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.0977438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058321Jy  sigma=1.208186
! Fit after  self-cal, rms=0.058342Jy  sigma=1.207520
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.868 x 6.744 at -5.924 degrees (North through East)
! Clean map  min=-0.0035173  max=0.084333 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.05     OV        1.02     
!   PT        0.97     SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.08     MK        1.02     NL        0.97     OV        1.04     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.05     MK        0.99     NL        0.94     OV        1.02     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.02     NL        0.98     OV        0.98     
!   PT        0.98     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.058342Jy  sigma=1.207520
! Fit after  self-cal, rms=0.058887Jy  sigma=1.203959
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=6.781 mas, bpa=-6.183 degrees
! Estimated noise=0.700779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116995 Jy
! Component: 100  -  total flux cleaned = 1.90146e-05 Jy
! Component: 150  -  total flux cleaned = 4.26876e-05 Jy
! Component: 200  -  total flux cleaned = 9.08168e-05 Jy
! Total flux subtracted in 200 components = 9.08168e-05 Jy
! Clean residual min=-0.003515 max=0.004276 Jy/beam
! Clean residual mean=-0.000004 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.0978346 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 24 components and 0.0978346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058854Jy  sigma=1.203359
! Fit after  self-cal, rms=0.058891Jy  sigma=1.203120
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058891Jy  sigma=1.203120
! Fit after  self-cal, rms=0.059271Jy  sigma=1.201802
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.877 mas, bmaj=6.793 mas, bpa=-6.323 degrees
! Estimated noise=0.704181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174518 Jy
! Component: 100  -  total flux cleaned = 0.000172096 Jy
! Component: 150  -  total flux cleaned = 0.000243245 Jy
! Component: 200  -  total flux cleaned = 0.000284812 Jy
! Total flux subtracted in 200 components = 0.000284812 Jy
! Clean residual min=-0.003450 max=0.004178 Jy/beam
! Clean residual mean=-0.000005 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.0981194 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 25 components and 0.0981194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059248Jy  sigma=1.201399
! Fit after  self-cal, rms=0.059249Jy  sigma=1.201331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-103, 125.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367641 Jy
! Component: 100  -  total flux cleaned = 0.00395955 Jy
! Component: 150  -  total flux cleaned = 0.00441296 Jy
! Component: 200  -  total flux cleaned = 0.00485376 Jy
! Total flux subtracted in 200 components = 0.00485376 Jy
! Clean residual min=-0.003148 max=0.003014 Jy/beam
! Clean residual mean=-0.000012 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.102973 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.102973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058988Jy  sigma=1.196486
! Fit after  self-cal, rms=0.058930Jy  sigma=1.195636
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058930Jy  sigma=1.195636
! Fit after  self-cal, rms=0.058731Jy  sigma=1.193778
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.881 mas, bmaj=6.768 mas, bpa=-6.096 degrees
! Estimated noise=0.700757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147166 Jy
! Component: 100  -  total flux cleaned = 0.00195136 Jy
! Component: 150  -  total flux cleaned = 0.00230611 Jy
! Component: 200  -  total flux cleaned = 0.00259787 Jy
! Total flux subtracted in 200 components = 0.00259787 Jy
! Clean residual min=-0.002975 max=0.002680 Jy/beam
! Clean residual mean=-0.000010 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.105571 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 0.105571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058663Jy  sigma=1.192712
! Fit after  self-cal, rms=0.058659Jy  sigma=1.192475
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000610634 Jy
! Component: 100  -  total flux cleaned = 0.000907674 Jy
! Component: 150  -  total flux cleaned = 0.00109609 Jy
! Component: 200  -  total flux cleaned = 0.0012058 Jy
! Total flux subtracted in 200 components = 0.0012058 Jy
! Clean residual min=-0.003031 max=0.002653 Jy/beam
! Clean residual mean=-0.000007 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.106777 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.106777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058635Jy  sigma=1.192172
! Fit after  self-cal, rms=0.058630Jy  sigma=1.192128
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058630Jy  sigma=1.192128
! Fit after  self-cal, rms=0.058583Jy  sigma=1.191921
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.9 mas, bmaj=20.17 mas, bpa=-3.845 degrees
! Estimated noise=0.946213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105459 Jy
! Component: 100  -  total flux cleaned = 0.00163257 Jy
! Component: 150  -  total flux cleaned = 0.00179088 Jy
! Component: 200  -  total flux cleaned = 0.00184166 Jy
! Total flux subtracted in 200 components = 0.00184166 Jy
! Clean residual min=-0.002106 max=0.002059 Jy/beam
! Clean residual mean=-0.000016 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.108619 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 59 components and 0.108619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058575Jy  sigma=1.191823
! Fit after  self-cal, rms=0.058573Jy  sigma=1.191640
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173941 Jy
! Component: 100  -  total flux cleaned = 0.000311328 Jy
! Component: 150  -  total flux cleaned = 0.000378132 Jy
! Component: 200  -  total flux cleaned = 0.000407046 Jy
! Total flux subtracted in 200 components = 0.000407046 Jy
! Clean residual min=-0.002069 max=0.002039 Jy/beam
! Clean residual mean=-0.000013 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.109026 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.109026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058569Jy  sigma=1.191653
! Fit after  self-cal, rms=0.058567Jy  sigma=1.191539
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.88 mas, bmaj=6.76 mas, bpa=-6.023 degrees
! Estimated noise=0.700388 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.88 x 6.76 at -6.023 degrees (North through East)
! Clean map  min=-0.0029738  max=0.085236 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.431 mas, bmaj=5.677 mas, bpa=-7.18 degrees
! Estimated noise=0.908216 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0638175 Jy
! Component: 100  -  total flux cleaned = 0.0812724 Jy
! Component: 150  -  total flux cleaned = 0.0890764 Jy
! Component: 200  -  total flux cleaned = 0.0923806 Jy
! Total flux subtracted in 200 components = 0.0923806 Jy
! Clean residual min=-0.004261 max=0.003619 Jy/beam
! Clean residual mean=-0.000016 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.0923805 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0923805 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.88 mas, bmaj=6.76 mas, bpa=-6.023 degrees
! Estimated noise=0.700388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479034 Jy
! Component: 100  -  total flux cleaned = 0.00788353 Jy
! Component: 150  -  total flux cleaned = 0.00988563 Jy
! Component: 200  -  total flux cleaned = 0.0112075 Jy
! Total flux subtracted in 200 components = 0.0112075 Jy
! Clean residual min=-0.003063 max=0.003002 Jy/beam
! Clean residual mean=-0.000020 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.103588 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.103588 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.9 mas, bmaj=20.17 mas, bpa=-3.845 degrees
! Estimated noise=0.946213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275695 Jy
! Component: 100  -  total flux cleaned = 0.00403864 Jy
! Component: 150  -  total flux cleaned = 0.00483762 Jy
! Component: 200  -  total flux cleaned = 0.0050249 Jy
! Total flux subtracted in 200 components = 0.0050249 Jy
! Clean residual min=-0.002070 max=0.002209 Jy/beam
! Clean residual mean=-0.000022 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.108613 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.90287e-05 Jy
! Component: 100  -  total flux cleaned = 0.000148024 Jy
! Component: 150  -  total flux cleaned = 0.000196065 Jy
! Component: 200  -  total flux cleaned = 0.000224983 Jy
! Total flux subtracted in 200 components = 0.000224983 Jy
! Clean residual min=-0.002064 max=0.002071 Jy/beam
! Clean residual mean=-0.000022 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.108838 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.108838 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.88 mas, bmaj=6.76 mas, bpa=-6.023 degrees
! Estimated noise=0.700388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002853 Jy
! Component: 100  -  total flux cleaned = 0.000164012 Jy
! Component: 150  -  total flux cleaned = 2.71905e-05 Jy
! Component: 200  -  total flux cleaned = 2.34717e-05 Jy
! Total flux subtracted in 200 components = 2.34717e-05 Jy
! Clean residual min=-0.002852 max=0.002824 Jy/beam
! Clean residual mean=-0.000006 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.108861 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 57 components and 0.108861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058601Jy  sigma=1.192254
! Fit after  self-cal, rms=0.058599Jy  sigma=1.192042
wmodel /J0406-2355_S_map.mod
! wmodel: Unable to open new model file: /J0406-2355_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0406-2355_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.88 x 6.76 at -6.023 degrees (North through East)
! Clean map  min=-0.0030068  max=0.084754 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0406-2355_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.084754 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000618116 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.18792 2.18792 4.37584 8.75167 17.5033 35.0067 70.0134
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.084 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  137.116 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0406-2355_S_dfm.log closed on Thu May 19 23:51:05 2016