! Started logfile: /scr/pima/bg219a_uvs/J0403-3605_X_uvs.log on Wed Apr 6 21:25:29 2016 obs /scr/pima/bg219a_uvs/J0403-3605_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0403-3605_X_uva.fits ! AN table 1: 36 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.62037 visibilities/baseline/integration-bin. ! Found source: J0403-3605 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 4020 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0403-3605_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.874529Jy sigma=23.738016 ! Fit after self-cal, rms=0.652606Jy sigma=8.526735 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6417 mas, bmaj=2.031 mas, bpa=1.305 degrees ! Estimated noise=1.96266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18154 Jy ! Component: 100 - total flux cleaned = 1.4441 Jy ! Total flux subtracted in 100 components = 1.4441 Jy ! Clean residual min=-0.067639 max=0.098921 Jy/beam ! Clean residual mean=0.000131 rms=0.017151 Jy/beam ! Combined flux in latest and established models = 1.4441 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.4441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.364634Jy sigma=4.794044 ! Fit after self-cal, rms=0.364629Jy sigma=4.794024 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7846 mas, bmaj=2.432 mas, bpa=2.096 degrees ! Estimated noise=1.29293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111596 Jy ! Component: 100 - total flux cleaned = 0.165321 Jy ! Component: 150 - total flux cleaned = 0.185543 Jy ! Component: 200 - total flux cleaned = 0.189502 Jy ! Total flux subtracted in 200 components = 0.189502 Jy ! Clean residual min=-0.047306 max=0.090103 Jy/beam ! Clean residual mean=0.000211 rms=0.016003 Jy/beam ! Combined flux in latest and established models = 1.63361 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.63361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.330442Jy sigma=4.364045 ! Fit after self-cal, rms=0.330430Jy sigma=4.364013 ! Inverting map ! Added new window around map position (1.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0744704 Jy ! Component: 100 - total flux cleaned = 0.0824296 Jy ! Component: 150 - total flux cleaned = 0.0914153 Jy ! Component: 200 - total flux cleaned = 0.0973515 Jy ! Total flux subtracted in 200 components = 0.0973515 Jy ! Clean residual min=-0.037004 max=0.071856 Jy/beam ! Clean residual mean=0.000116 rms=0.011289 Jy/beam ! Combined flux in latest and established models = 1.73096 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 1.73096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.312770Jy sigma=4.155150 ! Fit after self-cal, rms=0.311001Jy sigma=4.125796 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7846 x 2.432 at 2.096 degrees (North through East) ! Clean map min=-0.037457 max=1.5132 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 0.96 NL 1.06 OV 1.01 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.97 MK 0.96 NL 1.04 OV 1.04 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 0.97 NL 1.04 OV 1.02 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 0.97 NL 1.04 OV 1.01 ! PT 0.96 SC 1.00 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.97 MK 1.01 NL 1.06 OV 1.01 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 0.98 NL 1.02 OV 1.03 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 0.99 NL 1.04 OV 1.00 ! PT 0.96 SC 0.97 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.311001Jy sigma=4.125796 ! Fit after self-cal, rms=0.309954Jy sigma=4.111133 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7575 mas, bmaj=2.379 mas, bpa=2.343 degrees ! Estimated noise=1.31851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0235331 Jy ! Component: 100 - total flux cleaned = -0.0323144 Jy ! Component: 150 - total flux cleaned = -0.0327158 Jy ! Component: 200 - total flux cleaned = -0.0327162 Jy ! Total flux subtracted in 200 components = -0.0327162 Jy ! Clean residual min=-0.018100 max=0.018528 Jy/beam ! Clean residual mean=0.000030 rms=0.004624 Jy/beam ! Combined flux in latest and established models = 1.69824 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 1.69824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.307715Jy sigma=4.089003 ! Fit after self-cal, rms=0.307578Jy sigma=4.087747 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.307578Jy sigma=4.087747 ! Fit after self-cal, rms=0.306704Jy sigma=4.074355 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7578 mas, bmaj=2.381 mas, bpa=2.391 degrees ! Estimated noise=1.3186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00818516 Jy ! Component: 100 - total flux cleaned = -0.0106587 Jy ! Component: 150 - total flux cleaned = -0.0111788 Jy ! Component: 200 - total flux cleaned = -0.0114107 Jy ! Total flux subtracted in 200 components = -0.0114107 Jy ! Clean residual min=-0.014022 max=0.015026 Jy/beam ! Clean residual mean=0.000021 rms=0.003748 Jy/beam ! Combined flux in latest and established models = 1.68683 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 1.68683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.306047Jy sigma=4.068920 ! Fit after self-cal, rms=0.306008Jy sigma=4.068734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160882 Jy ! Component: 100 - total flux cleaned = -0.00178563 Jy ! Component: 150 - total flux cleaned = -0.00212128 Jy ! Component: 200 - total flux cleaned = -0.00243462 Jy ! Total flux subtracted in 200 components = -0.00243462 Jy ! Clean residual min=-0.013762 max=0.014936 Jy/beam ! Clean residual mean=0.000023 rms=0.003659 Jy/beam ! Combined flux in latest and established models = 1.6844 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 1.6844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.305779Jy sigma=4.067026 ! Fit after self-cal, rms=0.305764Jy sigma=4.066972 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.305764Jy sigma=4.066972 ! Fit after self-cal, rms=0.304459Jy sigma=4.051094 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7574 mas, bmaj=2.382 mas, bpa=2.453 degrees ! Estimated noise=1.3177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00306754 Jy ! Component: 100 - total flux cleaned = -0.00390792 Jy ! Component: 150 - total flux cleaned = -0.0042336 Jy ! Component: 200 - total flux cleaned = -0.00438347 Jy ! Total flux subtracted in 200 components = -0.00438347 Jy ! Clean residual min=-0.010676 max=0.010328 Jy/beam ! Clean residual mean=0.000000 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 1.68001 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 1.68001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.304106Jy sigma=4.048749 ! Fit after self-cal, rms=0.304074Jy sigma=4.048573 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104237 Jy ! Component: 100 - total flux cleaned = -0.0011497 Jy ! Component: 150 - total flux cleaned = -0.00124466 Jy ! Component: 200 - total flux cleaned = -0.00124296 Jy ! Total flux subtracted in 200 components = -0.00124296 Jy ! Clean residual min=-0.010546 max=0.010052 Jy/beam ! Clean residual mean=0.000001 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 1.67877 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 1.67877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.303986Jy sigma=4.048043 ! Fit after self-cal, rms=0.303977Jy sigma=4.048014 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.303977Jy sigma=4.048014 ! Fit after self-cal, rms=0.303799Jy sigma=4.046783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.91 mas, bmaj=6.323 mas, bpa=-2.601 degrees ! Estimated noise=1.80751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310247 Jy ! Component: 100 - total flux cleaned = -0.00367362 Jy ! Component: 150 - total flux cleaned = -0.00392435 Jy ! Component: 200 - total flux cleaned = -0.00392589 Jy ! Total flux subtracted in 200 components = -0.00392589 Jy ! Clean residual min=-0.012626 max=0.011382 Jy/beam ! Clean residual mean=-0.000017 rms=0.003672 Jy/beam ! Combined flux in latest and established models = 1.67484 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 1.67484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.303694Jy sigma=4.046353 ! Fit after self-cal, rms=0.303686Jy sigma=4.046286 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547798 Jy ! Component: 100 - total flux cleaned = -0.000460396 Jy ! Component: 150 - total flux cleaned = -0.000459466 Jy ! Component: 200 - total flux cleaned = -0.000424362 Jy ! Total flux subtracted in 200 components = -0.000424362 Jy ! Clean residual min=-0.012654 max=0.011303 Jy/beam ! Clean residual mean=-0.000016 rms=0.003661 Jy/beam ! Combined flux in latest and established models = 1.67442 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 86 components and 1.67442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.303662Jy sigma=4.046492 ! Fit after self-cal, rms=0.303660Jy sigma=4.046484 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.757 mas, bmaj=2.383 mas, bpa=2.454 degrees ! Estimated noise=1.31637 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.757 x 2.383 at 2.454 degrees (North through East) ! Clean map min=-0.035504 max=1.5014 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.303660Jy sigma=4.046484 ! Fit after self-cal, rms=0.280788Jy sigma=3.749783 ! Inverting map and beam ! Estimated beam: bmin=0.7582 mas, bmaj=2.387 mas, bpa=2.674 degrees ! Estimated noise=1.25104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0602881 Jy ! Component: 100 - total flux cleaned = -0.0703683 Jy ! Component: 150 - total flux cleaned = -0.0723961 Jy ! Component: 200 - total flux cleaned = -0.0750553 Jy ! Total flux subtracted in 200 components = -0.0750553 Jy ! Clean residual min=-0.015639 max=0.022883 Jy/beam ! Clean residual mean=0.000068 rms=0.004551 Jy/beam ! Combined flux in latest and established models = 1.59936 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 1.59936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.267298Jy sigma=3.596530 ! Fit after self-cal, rms=0.267257Jy sigma=3.595633 ! Inverting map ! Added new window around map position (4.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213192 Jy ! Component: 100 - total flux cleaned = 0.0282645 Jy ! Component: 150 - total flux cleaned = 0.030196 Jy ! Component: 200 - total flux cleaned = 0.0305245 Jy ! Total flux subtracted in 200 components = 0.0305245 Jy ! Clean residual min=-0.013391 max=0.013462 Jy/beam ! Clean residual mean=0.000029 rms=0.003099 Jy/beam ! Combined flux in latest and established models = 1.62989 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 117 components and 1.62989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.265062Jy sigma=3.571966 ! Fit after self-cal, rms=0.264939Jy sigma=3.569984 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.264939Jy sigma=3.569984 ! Fit after self-cal, rms=0.254675Jy sigma=3.410639 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6318 mas, bmaj=2.014 mas, bpa=1.913 degrees ! Estimated noise=1.82323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07768 Jy ! Component: 100 - total flux cleaned = 1.31479 Jy ! Component: 150 - total flux cleaned = 1.3915 Jy ! Component: 200 - total flux cleaned = 1.4348 Jy ! Total flux subtracted in 200 components = 1.4348 Jy ! Clean residual min=-0.028157 max=0.029233 Jy/beam ! Clean residual mean=0.000076 rms=0.006379 Jy/beam ! Combined flux in latest and established models = 1.4348 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.4348 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7593 mas, bmaj=2.39 mas, bpa=2.772 degrees ! Estimated noise=1.19754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429647 Jy ! Component: 100 - total flux cleaned = 0.0710152 Jy ! Component: 150 - total flux cleaned = 0.0914218 Jy ! Component: 200 - total flux cleaned = 0.107028 Jy ! Total flux subtracted in 200 components = 0.107028 Jy ! Clean residual min=-0.014995 max=0.017517 Jy/beam ! Clean residual mean=0.000075 rms=0.003744 Jy/beam ! Combined flux in latest and established models = 1.54182 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 49 components and 1.54182 Jy ! Inverting map ! Added new window around map position (-5.2, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179746 Jy ! Component: 100 - total flux cleaned = 0.0285485 Jy ! Component: 150 - total flux cleaned = 0.0340365 Jy ! Component: 200 - total flux cleaned = 0.0377382 Jy ! Total flux subtracted in 200 components = 0.0377382 Jy ! Clean residual min=-0.009702 max=0.008897 Jy/beam ! Clean residual mean=0.000031 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 1.57956 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 1.57956 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.903 mas, bmaj=6.365 mas, bpa=-2.523 degrees ! Estimated noise=1.6424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206561 Jy ! Component: 100 - total flux cleaned = 0.00362186 Jy ! Component: 150 - total flux cleaned = 0.00398586 Jy ! Component: 200 - total flux cleaned = 0.00383329 Jy ! Total flux subtracted in 200 components = 0.00383329 Jy ! Clean residual min=-0.010539 max=0.009618 Jy/beam ! Clean residual mean=0.000052 rms=0.003067 Jy/beam ! Combined flux in latest and established models = 1.5834 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146609 Jy ! Component: 100 - total flux cleaned = -0.000410305 Jy ! Component: 150 - total flux cleaned = -0.000527151 Jy ! Component: 200 - total flux cleaned = -0.000749139 Jy ! Total flux subtracted in 200 components = -0.000749139 Jy ! Clean residual min=-0.010135 max=0.009283 Jy/beam ! Clean residual mean=0.000050 rms=0.002942 Jy/beam ! Combined flux in latest and established models = 1.58265 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 120 components and 1.58265 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7593 mas, bmaj=2.39 mas, bpa=2.772 degrees ! Estimated noise=1.19754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138201 Jy ! Component: 100 - total flux cleaned = 4.74966e-05 Jy ! Component: 150 - total flux cleaned = 3.713e-05 Jy ! Component: 200 - total flux cleaned = -0.000109578 Jy ! Total flux subtracted in 200 components = -0.000109578 Jy ! Clean residual min=-0.008352 max=0.007709 Jy/beam ! Clean residual mean=0.000023 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 1.58254 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 1.58254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.239450Jy sigma=3.265142 ! Fit after self-cal, rms=0.239383Jy sigma=3.263768 wmodel /scr/pima/bg219a_uvs/J0403-3605_X_map.mod ! Writing 142 model components to file: /scr/pima/bg219a_uvs/J0403-3605_X_map.mod wobs /scr/pima/bg219a_uvs/J0403-3605_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J0403-3605_X_uvs.fits wwins /scr/pima/bg219a_uvs/J0403-3605_X_map.win ! wwins: Wrote 5 windows to /scr/pima/bg219a_uvs/J0403-3605_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000857102 Jy ! Component: 100 - total flux cleaned = 0.000246844 Jy ! Component: 150 - total flux cleaned = 0.000582789 Jy ! Component: 200 - total flux cleaned = 0.000582135 Jy ! Component: 250 - total flux cleaned = 0.00108197 Jy ! Component: 300 - total flux cleaned = 0.000982373 Jy ! Component: 350 - total flux cleaned = 0.000888434 Jy ! Component: 400 - total flux cleaned = 0.00106685 Jy ! Component: 450 - total flux cleaned = 0.0012375 Jy ! Component: 500 - total flux cleaned = 0.00140375 Jy ! Component: 550 - total flux cleaned = 0.00172489 Jy ! Component: 600 - total flux cleaned = 0.00203497 Jy ! Component: 650 - total flux cleaned = 0.00241184 Jy ! Component: 700 - total flux cleaned = 0.00284851 Jy ! Component: 750 - total flux cleaned = 0.00320202 Jy ! Component: 800 - total flux cleaned = 0.00354557 Jy ! Component: 850 - total flux cleaned = 0.00394787 Jy ! Component: 900 - total flux cleaned = 0.00421048 Jy ! Component: 950 - total flux cleaned = 0.00472549 Jy ! Component: 1000 - total flux cleaned = 0.00497684 Jy ! Component: 1050 - total flux cleaned = 0.00534587 Jy ! Component: 1100 - total flux cleaned = 0.0057057 Jy ! Component: 1150 - total flux cleaned = 0.00617375 Jy ! Component: 1200 - total flux cleaned = 0.00646114 Jy ! Component: 1250 - total flux cleaned = 0.00679997 Jy ! Component: 1300 - total flux cleaned = 0.00691075 Jy ! Component: 1350 - total flux cleaned = 0.00712848 Jy ! Component: 1400 - total flux cleaned = 0.00739606 Jy ! Component: 1450 - total flux cleaned = 0.00760642 Jy ! Component: 1500 - total flux cleaned = 0.00760621 Jy ! Component: 1550 - total flux cleaned = 0.00760728 Jy ! Component: 1600 - total flux cleaned = 0.00765869 Jy ! Component: 1650 - total flux cleaned = 0.00785827 Jy ! Component: 1700 - total flux cleaned = 0.00790734 Jy ! Component: 1750 - total flux cleaned = 0.00790776 Jy ! Component: 1800 - total flux cleaned = 0.00800479 Jy ! Component: 1850 - total flux cleaned = 0.00805278 Jy ! Component: 1900 - total flux cleaned = 0.00805306 Jy ! Component: 1950 - total flux cleaned = 0.00800618 Jy ! Component: 2000 - total flux cleaned = 0.00809973 Jy ! Component: 2050 - total flux cleaned = 0.00796055 Jy ! Component: 2100 - total flux cleaned = 0.00819036 Jy ! Component: 2150 - total flux cleaned = 0.0082357 Jy ! Component: 2200 - total flux cleaned = 0.00823557 Jy ! Component: 2250 - total flux cleaned = 0.008552 Jy ! Component: 2300 - total flux cleaned = 0.00859718 Jy ! Component: 2350 - total flux cleaned = 0.00864191 Jy ! Component: 2400 - total flux cleaned = 0.00864196 Jy ! Component: 2450 - total flux cleaned = 0.00868666 Jy ! Component: 2500 - total flux cleaned = 0.00868685 Jy ! Component: 2550 - total flux cleaned = 0.00868685 Jy ! Component: 2600 - total flux cleaned = 0.00868699 Jy ! Component: 2650 - total flux cleaned = 0.00859907 Jy ! Component: 2700 - total flux cleaned = 0.00864281 Jy ! Component: 2750 - total flux cleaned = 0.00851198 Jy ! Component: 2800 - total flux cleaned = 0.00864291 Jy ! Component: 2850 - total flux cleaned = 0.0089042 Jy ! Component: 2900 - total flux cleaned = 0.00912173 Jy ! Component: 2950 - total flux cleaned = 0.00920854 Jy ! Component: 3000 - total flux cleaned = 0.00929547 Jy ! Component: 3050 - total flux cleaned = 0.00946889 Jy ! Component: 3100 - total flux cleaned = 0.0095555 Jy ! Component: 3150 - total flux cleaned = 0.00964224 Jy ! Component: 3200 - total flux cleaned = 0.00959875 Jy ! Component: 3250 - total flux cleaned = 0.00951197 Jy ! Component: 3300 - total flux cleaned = 0.00946838 Jy ! Component: 3350 - total flux cleaned = 0.00959843 Jy ! Component: 3400 - total flux cleaned = 0.00946826 Jy ! Component: 3450 - total flux cleaned = 0.00946833 Jy ! Component: 3500 - total flux cleaned = 0.00938142 Jy ! Component: 3550 - total flux cleaned = 0.00942493 Jy ! Component: 3600 - total flux cleaned = 0.00942499 Jy ! Component: 3650 - total flux cleaned = 0.00933793 Jy ! Component: 3700 - total flux cleaned = 0.00938174 Jy ! Component: 3750 - total flux cleaned = 0.00955739 Jy ! Component: 3800 - total flux cleaned = 0.00964536 Jy ! Component: 3850 - total flux cleaned = 0.00968938 Jy ! Component: 3900 - total flux cleaned = 0.00982219 Jy ! Component: 3950 - total flux cleaned = 0.00991091 Jy ! Component: 4000 - total flux cleaned = 0.0100444 Jy ! Component: 4050 - total flux cleaned = 0.0101336 Jy ! Total flux subtracted in 4096 components = 0.0102681 Jy ! Clean residual min=-0.002716 max=0.002917 Jy/beam ! Clean residual mean=0.000009 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 1.5928 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 375 components and 1.5928 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J0403-3605_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7593 x 2.39 at 2.772 degrees (North through East) ! Clean map min=-0.0066809 max=1.38 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0403-3605_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.37996 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000730979 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.158913 0.158913 0.317826 0.635651 1.2713 2.5426 5.08521 10.1704 20.3408 40.6817 81.3634 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.379 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1887.83 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0403-3605_X_uvs.log closed on Wed Apr 6 21:25:34 2016