! Started logfile: /scr/pima/bg219a_uvs/J0352-2514_X_dfm.log on Thu May 19 23:50:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0352-2514_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0352-2514_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0352-2514
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5040 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0352-2514_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.057641Jy  sigma=25.041851
! Fit after  self-cal, rms=0.691911Jy  sigma=16.087445
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5351 mas, bmaj=1.543 mas, bpa=-0.1533 degrees
! Estimated noise=0.783665 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.231547 Jy
! Component: 100  -  total flux cleaned = 0.283574 Jy
! Total flux subtracted in 100 components = 0.283574 Jy
! Clean residual min=-0.015100 max=0.023095 Jy/beam
! Clean residual mean=-0.000006 rms=0.003486 Jy/beam
! Combined flux in latest and established models = 0.283574 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.283574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091649Jy  sigma=2.237736
! Fit after  self-cal, rms=0.091650Jy  sigma=2.237516
! Inverting map 
! Added new window around map position (6.6, -5.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235828 Jy
! Component: 100  -  total flux cleaned = 0.0389876 Jy
! Total flux subtracted in 100 components = 0.0389876 Jy
! Clean residual min=-0.009928 max=0.012058 Jy/beam
! Clean residual mean=-0.000006 rms=0.002145 Jy/beam
! Combined flux in latest and established models = 0.322562 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.322562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081136Jy  sigma=1.946843
! Fit after  self-cal, rms=0.081089Jy  sigma=1.943841
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6771 mas, bmaj=1.796 mas, bpa=-0.03328 degrees
! Estimated noise=0.463391 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206687 Jy
! Component: 100  -  total flux cleaned = 0.0313497 Jy
! Component: 150  -  total flux cleaned = 0.0372412 Jy
! Component: 200  -  total flux cleaned = 0.0405898 Jy
! Total flux subtracted in 200 components = 0.0405898 Jy
! Clean residual min=-0.005489 max=0.006906 Jy/beam
! Clean residual mean=-0.000021 rms=0.001571 Jy/beam
! Combined flux in latest and established models = 0.363152 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.363152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076433Jy  sigma=1.816188
! Fit after  self-cal, rms=0.076451Jy  sigma=1.815927
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6771 x 1.796 at -0.03328 degrees (North through East)
! Clean map  min=-0.004998  max=0.30446 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        1.00     OV        1.03     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.00     OV        1.04     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.04     NL        1.01     OV        1.04     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.00     OV        1.03     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        1.03     OV        1.04     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        1.01     OV        1.04     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.00     OV        1.02     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        1.02     OV        1.03     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.98     NL        1.03     OV        1.02     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.98     NL        1.02     OV        1.04     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        0.98     OV        1.06     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        1.00     OV        1.05     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.076451Jy  sigma=1.815927
! Fit after  self-cal, rms=0.075984Jy  sigma=1.795813
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.679 mas, bmaj=1.799 mas, bpa=-0.04906 degrees
! Estimated noise=0.461647 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000452049 Jy
! Component: 100  -  total flux cleaned = -0.000535606 Jy
! Component: 150  -  total flux cleaned = -0.000559472 Jy
! Component: 200  -  total flux cleaned = -0.000581157 Jy
! Total flux subtracted in 200 components = -0.000581157 Jy
! Clean residual min=-0.003430 max=0.003563 Jy/beam
! Clean residual mean=0.000002 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.36257 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.36257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075963Jy  sigma=1.795406
! Fit after  self-cal, rms=0.075953Jy  sigma=1.795284
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075953Jy  sigma=1.795284
! Fit after  self-cal, rms=0.075811Jy  sigma=1.792716
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.679 mas, bmaj=1.8 mas, bpa=-0.03619 degrees
! Estimated noise=0.461378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000320439 Jy
! Component: 100  -  total flux cleaned = -0.000368522 Jy
! Component: 150  -  total flux cleaned = -0.000366905 Jy
! Component: 200  -  total flux cleaned = -0.000346952 Jy
! Total flux subtracted in 200 components = -0.000346952 Jy
! Clean residual min=-0.003217 max=0.003381 Jy/beam
! Clean residual mean=0.000001 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.362224 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.362224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075798Jy  sigma=1.792445
! Fit after  self-cal, rms=0.075791Jy  sigma=1.792407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.6, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000736969 Jy
! Component: 100  -  total flux cleaned = 0.000833333 Jy
! Component: 150  -  total flux cleaned = 0.000997095 Jy
! Component: 200  -  total flux cleaned = 0.00107746 Jy
! Total flux subtracted in 200 components = 0.00107746 Jy
! Clean residual min=-0.002759 max=0.002685 Jy/beam
! Clean residual mean=0.000002 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.363301 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.363301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075596Jy  sigma=1.789179
! Fit after  self-cal, rms=0.075592Jy  sigma=1.789071
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075592Jy  sigma=1.789071
! Fit after  self-cal, rms=0.075388Jy  sigma=1.785227
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6791 mas, bmaj=1.8 mas, bpa=0.00893 degrees
! Estimated noise=0.46076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000398651 Jy
! Component: 100  -  total flux cleaned = -0.000534547 Jy
! Component: 150  -  total flux cleaned = -0.000535319 Jy
! Component: 200  -  total flux cleaned = -0.000535341 Jy
! Total flux subtracted in 200 components = -0.000535341 Jy
! Clean residual min=-0.002245 max=0.002590 Jy/beam
! Clean residual mean=-0.000001 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.362766 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 0.362766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075366Jy  sigma=1.784916
! Fit after  self-cal, rms=0.075365Jy  sigma=1.784890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-28, 34.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224254 Jy
! Component: 100  -  total flux cleaned = 0.00333155 Jy
! Component: 150  -  total flux cleaned = 0.00385056 Jy
! Component: 200  -  total flux cleaned = 0.00407264 Jy
! Total flux subtracted in 200 components = 0.00407264 Jy
! Clean residual min=-0.002112 max=0.001716 Jy/beam
! Clean residual mean=-0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.366838 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.366838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075286Jy  sigma=1.783437
! Fit after  self-cal, rms=0.075277Jy  sigma=1.783307
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075277Jy  sigma=1.783307
! Fit after  self-cal, rms=0.075199Jy  sigma=1.783180
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.962 mas, bmaj=6.33 mas, bpa=-1.361 degrees
! Estimated noise=0.642202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000690826 Jy
! Component: 100  -  total flux cleaned = 0.000944921 Jy
! Component: 150  -  total flux cleaned = 0.00100071 Jy
! Component: 200  -  total flux cleaned = 0.0010339 Jy
! Total flux subtracted in 200 components = 0.0010339 Jy
! Clean residual min=-0.001768 max=0.001811 Jy/beam
! Clean residual mean=-0.000006 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.367872 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 100 components and 0.367872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075205Jy  sigma=1.783231
! Fit after  self-cal, rms=0.075199Jy  sigma=1.783176
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244568 Jy
! Component: 100  -  total flux cleaned = 0.000244243 Jy
! Component: 150  -  total flux cleaned = 0.000259829 Jy
! Component: 200  -  total flux cleaned = 0.000260248 Jy
! Total flux subtracted in 200 components = 0.000260248 Jy
! Clean residual min=-0.001785 max=0.001849 Jy/beam
! Clean residual mean=-0.000006 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.368132 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 103 components and 0.368132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075202Jy  sigma=1.783213
! Fit after  self-cal, rms=0.075200Jy  sigma=1.783199
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6792 mas, bmaj=1.801 mas, bpa=0.0008328 degrees
! Estimated noise=0.460345 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6792 x 1.801 at 0.0008328 degrees (North through East)
! Clean map  min=-0.003616  max=0.30453 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5364 mas, bmaj=1.543 mas, bpa=-0.09381 degrees
! Estimated noise=0.780323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.230472 Jy
! Component: 100  -  total flux cleaned = 0.282818 Jy
! Component: 150  -  total flux cleaned = 0.305089 Jy
! Component: 200  -  total flux cleaned = 0.320183 Jy
! Total flux subtracted in 200 components = 0.320183 Jy
! Clean residual min=-0.007137 max=0.011509 Jy/beam
! Clean residual mean=-0.000002 rms=0.001916 Jy/beam
! Combined flux in latest and established models = 0.320183 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.320183 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6792 mas, bmaj=1.801 mas, bpa=0.0008328 degrees
! Estimated noise=0.460345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197634 Jy
! Component: 100  -  total flux cleaned = 0.0297584 Jy
! Component: 150  -  total flux cleaned = 0.0348459 Jy
! Component: 200  -  total flux cleaned = 0.0372875 Jy
! Total flux subtracted in 200 components = 0.0372875 Jy
! Clean residual min=-0.002714 max=0.003130 Jy/beam
! Clean residual mean=-0.000007 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.357471 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 63 components and 0.357471 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.962 mas, bmaj=6.33 mas, bpa=-1.361 degrees
! Estimated noise=0.642202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454649 Jy
! Component: 100  -  total flux cleaned = 0.00689579 Jy
! Component: 150  -  total flux cleaned = 0.00833374 Jy
! Component: 200  -  total flux cleaned = 0.00864643 Jy
! Total flux subtracted in 200 components = 0.00864643 Jy
! Clean residual min=-0.002381 max=0.002295 Jy/beam
! Clean residual mean=-0.000013 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.366117 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161335 Jy
! Component: 100  -  total flux cleaned = 0.000271318 Jy
! Component: 150  -  total flux cleaned = 0.000403459 Jy
! Component: 200  -  total flux cleaned = 0.000498706 Jy
! Total flux subtracted in 200 components = 0.000498706 Jy
! Clean residual min=-0.002110 max=0.002043 Jy/beam
! Clean residual mean=-0.000011 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.366616 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 92 components and 0.366616 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6792 mas, bmaj=1.801 mas, bpa=0.0008328 degrees
! Estimated noise=0.460345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000616648 Jy
! Component: 100  -  total flux cleaned = -0.000498141 Jy
! Component: 150  -  total flux cleaned = -0.000453848 Jy
! Component: 200  -  total flux cleaned = -0.000375364 Jy
! Total flux subtracted in 200 components = -0.000375364 Jy
! Clean residual min=-0.002049 max=0.001872 Jy/beam
! Clean residual mean=-0.000004 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.366241 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 104 components and 0.366241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075299Jy  sigma=1.784502
! Fit after  self-cal, rms=0.075278Jy  sigma=1.784091
wmodel /J0352-2514_X_map.mod
! wmodel: Unable to open new model file: /J0352-2514_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0352-2514_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6792 x 1.801 at 0.0008328 degrees (North through East)
! Clean map  min=-0.0018225  max=0.3031 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0352-2514_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.303099 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000485336 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.480373 0.480373 0.960747 1.92149 3.84299 7.68597 15.3719 30.7439 61.4878
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.303 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  624.514 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0352-2514_X_dfm.log closed on Thu May 19 23:50:39 2016