! Started logfile: /scr/pima/bg219a_uvs/J0336-2036_S_dfm.log on Thu May 19 23:50:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0336-2036_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0336-2036_S_uva.fits
! AN table 1: 57 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0336-2036
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3420 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0336-2036_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020907Jy  sigma=22.528546
! Fit after  self-cal, rms=0.855740Jy  sigma=18.855125
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.973 mas, bmaj=6.088 mas, bpa=-1.261 degrees
! Estimated noise=0.846151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107509 Jy
! Component: 100  -  total flux cleaned = 0.133178 Jy
! Total flux subtracted in 100 components = 0.133178 Jy
! Clean residual min=-0.008019 max=0.011179 Jy/beam
! Clean residual mean=-0.000059 rms=0.002190 Jy/beam
! Combined flux in latest and established models = 0.133178 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.133178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064094Jy  sigma=1.348447
! Fit after  self-cal, rms=0.064095Jy  sigma=1.348278
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.533 mas, bmaj=6.927 mas, bpa=-2.3 degrees
! Estimated noise=0.561643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017544 Jy
! Component: 100  -  total flux cleaned = 0.0251957 Jy
! Component: 150  -  total flux cleaned = 0.0289364 Jy
! Component: 200  -  total flux cleaned = 0.0308885 Jy
! Total flux subtracted in 200 components = 0.0308885 Jy
! Clean residual min=-0.005697 max=0.010119 Jy/beam
! Clean residual mean=-0.000055 rms=0.001732 Jy/beam
! Combined flux in latest and established models = 0.164067 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 21 components and 0.164067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059838Jy  sigma=1.244858
! Fit after  self-cal, rms=0.059865Jy  sigma=1.244365
! Inverting map 
! Added new window around map position (-6.5, -9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00841848 Jy
! Component: 100  -  total flux cleaned = 0.0104296 Jy
! Component: 150  -  total flux cleaned = 0.010518 Jy
! Component: 200  -  total flux cleaned = 0.0103644 Jy
! Total flux subtracted in 200 components = 0.0103644 Jy
! Clean residual min=-0.004403 max=0.007225 Jy/beam
! Clean residual mean=-0.000025 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 0.174431 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 39 components and 0.174431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058779Jy  sigma=1.218406
! Fit after  self-cal, rms=0.058612Jy  sigma=1.214466
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.533 x 6.927 at -2.3 degrees (North through East)
! Clean map  min=-0.0038866  max=0.14559 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.07     NL        0.98     OV        1.04     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        1.00     OV        1.03     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.96     NL        1.02     OV        1.03     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.93     NL        1.01     OV        1.06     
!   PT        0.95     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.058612Jy  sigma=1.214466
! Fit after  self-cal, rms=0.058121Jy  sigma=1.205439
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.532 mas, bmaj=6.931 mas, bpa=-2.324 degrees
! Estimated noise=0.559059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049456 Jy
! Component: 100  -  total flux cleaned = 7.41763e-05 Jy
! Component: 150  -  total flux cleaned = -0.000314939 Jy
! Component: 200  -  total flux cleaned = -0.000697837 Jy
! Total flux subtracted in 200 components = -0.000697837 Jy
! Clean residual min=-0.003325 max=0.003428 Jy/beam
! Clean residual mean=0.000000 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.173733 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 0.173733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057949Jy  sigma=1.201979
! Fit after  self-cal, rms=0.057933Jy  sigma=1.201286
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057933Jy  sigma=1.201286
! Fit after  self-cal, rms=0.058030Jy  sigma=1.200200
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.534 mas, bmaj=6.934 mas, bpa=-2.297 degrees
! Estimated noise=0.560134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313971 Jy
! Component: 100  -  total flux cleaned = 2.10811e-06 Jy
! Component: 150  -  total flux cleaned = -0.000301325 Jy
! Component: 200  -  total flux cleaned = -0.000562541 Jy
! Total flux subtracted in 200 components = -0.000562541 Jy
! Clean residual min=-0.003276 max=0.003123 Jy/beam
! Clean residual mean=-0.000000 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.173171 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.173171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057966Jy  sigma=1.198892
! Fit after  self-cal, rms=0.057955Jy  sigma=1.198692
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217908 Jy
! Component: 100  -  total flux cleaned = -6.012e-05 Jy
! Component: 150  -  total flux cleaned = -0.000248167 Jy
! Component: 200  -  total flux cleaned = -0.000272336 Jy
! Total flux subtracted in 200 components = -0.000272336 Jy
! Clean residual min=-0.003245 max=0.002984 Jy/beam
! Clean residual mean=-0.000001 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.172898 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 65 components and 0.172898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057925Jy  sigma=1.198069
! Fit after  self-cal, rms=0.057919Jy  sigma=1.197988
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057919Jy  sigma=1.197988
! Fit after  self-cal, rms=0.058090Jy  sigma=1.196245
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.537 mas, bmaj=6.95 mas, bpa=-2.249 degrees
! Estimated noise=0.56103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00020081 Jy
! Component: 100  -  total flux cleaned = -3.84018e-05 Jy
! Component: 150  -  total flux cleaned = -0.000174248 Jy
! Component: 200  -  total flux cleaned = -0.000255336 Jy
! Total flux subtracted in 200 components = -0.000255336 Jy
! Clean residual min=-0.003170 max=0.002418 Jy/beam
! Clean residual mean=-0.000001 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.172643 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.172643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058064Jy  sigma=1.195784
! Fit after  self-cal, rms=0.058065Jy  sigma=1.195688
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141429 Jy
! Component: 100  -  total flux cleaned = 6.24408e-07 Jy
! Component: 150  -  total flux cleaned = -9.22013e-05 Jy
! Component: 200  -  total flux cleaned = -0.000110254 Jy
! Total flux subtracted in 200 components = -0.000110254 Jy
! Clean residual min=-0.003137 max=0.002405 Jy/beam
! Clean residual mean=-0.000001 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.172533 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.172533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058050Jy  sigma=1.195423
! Fit after  self-cal, rms=0.058048Jy  sigma=1.195388
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058048Jy  sigma=1.195388
! Fit after  self-cal, rms=0.058183Jy  sigma=1.195315
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.033 mas, bmaj=20.41 mas, bpa=-2.214 degrees
! Estimated noise=0.767148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192027 Jy
! Component: 100  -  total flux cleaned = 0.000170525 Jy
! Component: 150  -  total flux cleaned = 0.000130749 Jy
! Component: 200  -  total flux cleaned = 0.000130774 Jy
! Total flux subtracted in 200 components = 0.000130774 Jy
! Clean residual min=-0.003248 max=0.003130 Jy/beam
! Clean residual mean=-0.000005 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.172664 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 92 components and 0.172664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058183Jy  sigma=1.195238
! Fit after  self-cal, rms=0.058185Jy  sigma=1.195208
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188929 Jy
! Component: 100  -  total flux cleaned = 0.000171557 Jy
! Component: 150  -  total flux cleaned = 0.000138243 Jy
! Component: 200  -  total flux cleaned = 0.000138164 Jy
! Total flux subtracted in 200 components = 0.000138164 Jy
! Clean residual min=-0.003135 max=0.003094 Jy/beam
! Clean residual mean=-0.000004 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.172802 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 94 components and 0.172802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058184Jy  sigma=1.195176
! Fit after  self-cal, rms=0.058183Jy  sigma=1.195167
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.54 mas, bmaj=6.957 mas, bpa=-2.237 degrees
! Estimated noise=0.561626 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.54 x 6.957 at -2.237 degrees (North through East)
! Clean map  min=-0.0036117  max=0.14385 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.973 mas, bmaj=6.101 mas, bpa=-1.196 degrees
! Estimated noise=0.851582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107893 Jy
! Component: 100  -  total flux cleaned = 0.13417 Jy
! Component: 150  -  total flux cleaned = 0.147556 Jy
! Component: 200  -  total flux cleaned = 0.155825 Jy
! Total flux subtracted in 200 components = 0.155825 Jy
! Clean residual min=-0.005805 max=0.006072 Jy/beam
! Clean residual mean=-0.000023 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 0.155825 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.155825 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.54 mas, bmaj=6.957 mas, bpa=-2.237 degrees
! Estimated noise=0.561626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00867756 Jy
! Component: 100  -  total flux cleaned = 0.0131171 Jy
! Component: 150  -  total flux cleaned = 0.0154278 Jy
! Component: 200  -  total flux cleaned = 0.0169063 Jy
! Total flux subtracted in 200 components = 0.0169063 Jy
! Clean residual min=-0.003533 max=0.003120 Jy/beam
! Clean residual mean=-0.000006 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.172731 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 46 components and 0.172731 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.033 mas, bmaj=20.41 mas, bpa=-2.214 degrees
! Estimated noise=0.767148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021879 Jy
! Component: 100  -  total flux cleaned = 0.0023539 Jy
! Component: 150  -  total flux cleaned = 0.00232767 Jy
! Component: 200  -  total flux cleaned = 0.00219873 Jy
! Total flux subtracted in 200 components = 0.00219873 Jy
! Clean residual min=-0.003297 max=0.003318 Jy/beam
! Clean residual mean=0.000008 rms=0.000988 Jy/beam
! Combined flux in latest and established models = 0.17493 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000107303 Jy
! Component: 100  -  total flux cleaned = -0.000154018 Jy
! Component: 150  -  total flux cleaned = -0.000219807 Jy
! Component: 200  -  total flux cleaned = -0.000259652 Jy
! Total flux subtracted in 200 components = -0.000259652 Jy
! Clean residual min=-0.003265 max=0.003184 Jy/beam
! Clean residual mean=0.000007 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.17467 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.17467 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.54 mas, bmaj=6.957 mas, bpa=-2.237 degrees
! Estimated noise=0.561626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352838 Jy
! Component: 100  -  total flux cleaned = -0.000357109 Jy
! Component: 150  -  total flux cleaned = -0.000209398 Jy
! Component: 200  -  total flux cleaned = -0.000296526 Jy
! Total flux subtracted in 200 components = -0.000296526 Jy
! Clean residual min=-0.002990 max=0.002530 Jy/beam
! Clean residual mean=0.000002 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.174374 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.174374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058237Jy  sigma=1.196129
! Fit after  self-cal, rms=0.058221Jy  sigma=1.195761
wmodel /J0336-2036_S_map.mod
! wmodel: Unable to open new model file: /J0336-2036_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0336-2036_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.54 x 6.957 at -2.237 degrees (North through East)
! Clean map  min=-0.0036091  max=0.13808 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0336-2036_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.138079 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000690766 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.50081 1.50081 3.00162 6.00325 12.0065 24.013 48.026 96.052
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.138 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  199.891 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0336-2036_S_dfm.log closed on Thu May 19 23:50:15 2016