! Started logfile: /scr/pima/bg219a_uvs/J0335-0709_S_dfm.log on Thu May 19 23:50:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0335-0709_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0335-0709_S_uva.fits
! AN table 1: 86 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.612403 visibilities/baseline/integration-bin.
! Found source: J0335-0709
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0335-0709_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011334Jy  sigma=18.698330
! Fit after  self-cal, rms=0.932189Jy  sigma=17.332874
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.583 mas, bmaj=7.647 mas, bpa=-10.2 degrees
! Estimated noise=1.26607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0548786 Jy
! Component: 100  -  total flux cleaned = 0.0670611 Jy
! Total flux subtracted in 100 components = 0.0670611 Jy
! Clean residual min=-0.005396 max=0.005458 Jy/beam
! Clean residual mean=0.000004 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 0.0670611 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0670611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111602Jy  sigma=1.055141
! Fit after  self-cal, rms=0.110879Jy  sigma=1.040724
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.285 mas, bmaj=9.061 mas, bpa=-9.585 degrees
! Estimated noise=0.749873 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00598764 Jy
! Component: 100  -  total flux cleaned = 0.00869895 Jy
! Component: 150  -  total flux cleaned = 0.0101373 Jy
! Component: 200  -  total flux cleaned = 0.0109393 Jy
! Total flux subtracted in 200 components = 0.0109393 Jy
! Clean residual min=-0.003294 max=0.003726 Jy/beam
! Clean residual mean=-0.000001 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.0780004 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 31 components and 0.0780004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110404Jy  sigma=1.031754
! Fit after  self-cal, rms=0.110464Jy  sigma=1.031523
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.285 x 9.061 at -9.585 degrees (North through East)
! Clean map  min=-0.003169  max=0.071809 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.05     NL        0.95     OV        1.08     
!   PT        1.03     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.97     NL        1.06     OV        1.04     
!   PT        0.98     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.08     MK        0.97     NL        1.04     OV        0.91     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.04     MK        1.03     NL        0.95     OV        0.99     
!   PT        0.95     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.110464Jy  sigma=1.031523
! Fit after  self-cal, rms=0.108784Jy  sigma=1.027664
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.288 mas, bmaj=9.08 mas, bpa=-9.693 degrees
! Estimated noise=0.755914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00095081 Jy
! Component: 100  -  total flux cleaned = 0.00132677 Jy
! Component: 150  -  total flux cleaned = 0.00140356 Jy
! Component: 200  -  total flux cleaned = 0.00147056 Jy
! Total flux subtracted in 200 components = 0.00147056 Jy
! Clean residual min=-0.002985 max=0.003801 Jy/beam
! Clean residual mean=-0.000002 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.079471 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 34 components and 0.079471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108751Jy  sigma=1.027635
! Fit after  self-cal, rms=0.108879Jy  sigma=1.027354
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108879Jy  sigma=1.027354
! Fit after  self-cal, rms=0.109413Jy  sigma=1.024507
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.281 mas, bmaj=9.062 mas, bpa=-9.548 degrees
! Estimated noise=0.76923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124161 Jy
! Component: 100  -  total flux cleaned = 0.00184258 Jy
! Component: 150  -  total flux cleaned = 0.00192058 Jy
! Component: 200  -  total flux cleaned = 0.00198788 Jy
! Total flux subtracted in 200 components = 0.00198788 Jy
! Clean residual min=-0.002947 max=0.003793 Jy/beam
! Clean residual mean=-0.000005 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 0.0814589 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 43 components and 0.0814589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109369Jy  sigma=1.024413
! Fit after  self-cal, rms=0.109383Jy  sigma=1.024291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-85.5, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325846 Jy
! Component: 100  -  total flux cleaned = 0.00373202 Jy
! Component: 150  -  total flux cleaned = 0.00394031 Jy
! Component: 200  -  total flux cleaned = 0.00411513 Jy
! Total flux subtracted in 200 components = 0.00411513 Jy
! Clean residual min=-0.002423 max=0.002797 Jy/beam
! Clean residual mean=0.000002 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.085574 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.085574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109253Jy  sigma=1.021181
! Fit after  self-cal, rms=0.109148Jy  sigma=1.020795
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109148Jy  sigma=1.020795
! Fit after  self-cal, rms=0.109407Jy  sigma=1.020523
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.28 mas, bmaj=9.058 mas, bpa=-9.521 degrees
! Estimated noise=0.775526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129136 Jy
! Component: 100  -  total flux cleaned = 0.00153004 Jy
! Component: 150  -  total flux cleaned = 0.00173667 Jy
! Component: 200  -  total flux cleaned = 0.00188728 Jy
! Total flux subtracted in 200 components = 0.00188728 Jy
! Clean residual min=-0.002376 max=0.002802 Jy/beam
! Clean residual mean=0.000004 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.0874613 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.0874613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109337Jy  sigma=1.019753
! Fit after  self-cal, rms=0.109309Jy  sigma=1.019689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173226 Jy
! Component: 100  -  total flux cleaned = 0.000315684 Jy
! Component: 150  -  total flux cleaned = 0.000449625 Jy
! Component: 200  -  total flux cleaned = 0.000606292 Jy
! Total flux subtracted in 200 components = 0.000606292 Jy
! Clean residual min=-0.002322 max=0.002799 Jy/beam
! Clean residual mean=0.000004 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.0880676 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.0880676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109278Jy  sigma=1.019265
! Fit after  self-cal, rms=0.109271Jy  sigma=1.019242
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109271Jy  sigma=1.019242
! Fit after  self-cal, rms=0.109566Jy  sigma=1.019031
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.536 mas, bmaj=20.03 mas, bpa=-13.53 degrees
! Estimated noise=0.987768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100346 Jy
! Component: 100  -  total flux cleaned = 0.00125311 Jy
! Component: 150  -  total flux cleaned = 0.00137002 Jy
! Component: 200  -  total flux cleaned = 0.00144649 Jy
! Total flux subtracted in 200 components = 0.00144649 Jy
! Clean residual min=-0.002322 max=0.003110 Jy/beam
! Clean residual mean=0.000010 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.0895141 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 105 components and 0.0895141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109521Jy  sigma=1.018994
! Fit after  self-cal, rms=0.109512Jy  sigma=1.018951
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.40648e-05 Jy
! Component: 100  -  total flux cleaned = 3.40068e-05 Jy
! Component: 150  -  total flux cleaned = 7.37334e-05 Jy
! Component: 200  -  total flux cleaned = 0.000128724 Jy
! Total flux subtracted in 200 components = 0.000128724 Jy
! Clean residual min=-0.002299 max=0.003070 Jy/beam
! Clean residual mean=0.000010 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.0896428 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 111 components and 0.0896428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109505Jy  sigma=1.018942
! Fit after  self-cal, rms=0.109503Jy  sigma=1.018927
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.279 mas, bmaj=9.058 mas, bpa=-9.532 degrees
! Estimated noise=0.783506 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.279 x 9.058 at -9.532 degrees (North through East)
! Clean map  min=-0.002995  max=0.074209 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.58 mas, bmaj=7.629 mas, bpa=-9.845 degrees
! Estimated noise=1.32754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0577178 Jy
! Component: 100  -  total flux cleaned = 0.0707272 Jy
! Component: 150  -  total flux cleaned = 0.0759459 Jy
! Component: 200  -  total flux cleaned = 0.0785143 Jy
! Total flux subtracted in 200 components = 0.0785143 Jy
! Clean residual min=-0.004694 max=0.004763 Jy/beam
! Clean residual mean=0.000005 rms=0.001329 Jy/beam
! Combined flux in latest and established models = 0.0785143 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0785143 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.279 mas, bmaj=9.058 mas, bpa=-9.532 degrees
! Estimated noise=0.783506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478494 Jy
! Component: 100  -  total flux cleaned = 0.00759604 Jy
! Component: 150  -  total flux cleaned = 0.00885672 Jy
! Component: 200  -  total flux cleaned = 0.0092622 Jy
! Total flux subtracted in 200 components = 0.0092622 Jy
! Clean residual min=-0.002596 max=0.002719 Jy/beam
! Clean residual mean=0.000004 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.0877765 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 59 components and 0.0877765 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.536 mas, bmaj=20.03 mas, bpa=-13.53 degrees
! Estimated noise=0.987768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000570998 Jy
! Component: 100  -  total flux cleaned = 0.000839032 Jy
! Component: 150  -  total flux cleaned = 0.00106073 Jy
! Component: 200  -  total flux cleaned = 0.00121145 Jy
! Total flux subtracted in 200 components = 0.00121145 Jy
! Clean residual min=-0.002478 max=0.003256 Jy/beam
! Clean residual mean=0.000009 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.0889879 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130857 Jy
! Component: 100  -  total flux cleaned = 0.000219135 Jy
! Component: 150  -  total flux cleaned = 0.000323728 Jy
! Component: 200  -  total flux cleaned = 0.000416627 Jy
! Total flux subtracted in 200 components = 0.000416627 Jy
! Clean residual min=-0.002365 max=0.003155 Jy/beam
! Clean residual mean=0.000009 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.0894046 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 103 components and 0.0894046 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.279 mas, bmaj=9.058 mas, bpa=-9.532 degrees
! Estimated noise=0.783506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248245 Jy
! Component: 100  -  total flux cleaned = 0.000151282 Jy
! Component: 150  -  total flux cleaned = 0.000149472 Jy
! Component: 200  -  total flux cleaned = 0.000224293 Jy
! Total flux subtracted in 200 components = 0.000224293 Jy
! Clean residual min=-0.002294 max=0.002914 Jy/beam
! Clean residual mean=0.000006 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.0896289 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 114 components and 0.0896289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109515Jy  sigma=1.019224
! Fit after  self-cal, rms=0.109474Jy  sigma=1.019142
wmodel /J0335-0709_S_map.mod
! wmodel: Unable to open new model file: /J0335-0709_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0335-0709_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.279 x 9.058 at -9.532 degrees (North through East)
! Clean map  min=-0.0028963  max=0.075518 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0335-0709_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0755177 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000659901 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.62151 2.62151 5.24301 10.486 20.9721 41.9441 83.8882
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  114.438 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0335-0709_S_dfm.log closed on Thu May 19 23:50:08 2016