! Started logfile: /scr/pima/bg219a_uvs/J0312+0133_X_dfm.log on Thu May 19 23:49:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0312+0133_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0312+0133_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0312+0133
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 4200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0312+0133_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022477Jy  sigma=28.079261
! Fit after  self-cal, rms=0.762419Jy  sigma=20.755766
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7021 mas, bmaj=1.644 mas, bpa=4.262 degrees
! Estimated noise=0.740994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.175052 Jy
! Component: 100  -  total flux cleaned = 0.219134 Jy
! Total flux subtracted in 100 components = 0.219134 Jy
! Clean residual min=-0.014723 max=0.020156 Jy/beam
! Clean residual mean=-0.000006 rms=0.003781 Jy/beam
! Combined flux in latest and established models = 0.219134 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.219134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080646Jy  sigma=2.265525
! Fit after  self-cal, rms=0.080549Jy  sigma=2.262150
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.899 mas, bmaj=1.96 mas, bpa=3.963 degrees
! Estimated noise=0.43336 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365418 Jy
! Component: 100  -  total flux cleaned = 0.0542817 Jy
! Component: 150  -  total flux cleaned = 0.0636863 Jy
! Component: 200  -  total flux cleaned = 0.0687756 Jy
! Total flux subtracted in 200 components = 0.0687756 Jy
! Clean residual min=-0.007867 max=0.011554 Jy/beam
! Clean residual mean=-0.000011 rms=0.002304 Jy/beam
! Combined flux in latest and established models = 0.287909 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.287909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064805Jy  sigma=1.781001
! Fit after  self-cal, rms=0.064821Jy  sigma=1.780031
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.899 x 1.96 at 3.963 degrees (North through East)
! Clean map  min=-0.0075721  max=0.23344 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        0.99     OV        1.08     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        0.98     OV        1.09     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.04     NL        0.99     OV        1.06     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.01     OV        1.07     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.04     NL        0.99     OV        1.06     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        1.00     OV        1.07     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.05     NL        0.99     OV        1.06     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        0.97     OV        1.07     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.97     OV        1.08     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        0.97     OV        1.06     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        0.97     OV        1.07     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.08     NL        0.98     OV        1.08     
!   PT        0.93     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.064821Jy  sigma=1.780031
! Fit after  self-cal, rms=0.064294Jy  sigma=1.735651
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9074 mas, bmaj=1.971 mas, bpa=4.256 degrees
! Estimated noise=0.431275 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.49607e-05 Jy
! Component: 100  -  total flux cleaned = -0.000364176 Jy
! Component: 150  -  total flux cleaned = -0.000415868 Jy
! Component: 200  -  total flux cleaned = -0.000414171 Jy
! Total flux subtracted in 200 components = -0.000414171 Jy
! Clean residual min=-0.005977 max=0.007891 Jy/beam
! Clean residual mean=-0.000005 rms=0.001617 Jy/beam
! Combined flux in latest and established models = 0.287495 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.287495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064163Jy  sigma=1.733635
! Fit after  self-cal, rms=0.064161Jy  sigma=1.733385
! Inverting map 
! Added new window around map position (9.2, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692424 Jy
! Component: 100  -  total flux cleaned = 0.00767718 Jy
! Component: 150  -  total flux cleaned = 0.00768067 Jy
! Component: 200  -  total flux cleaned = 0.00759718 Jy
! Total flux subtracted in 200 components = 0.00759718 Jy
! Clean residual min=-0.005119 max=0.004835 Jy/beam
! Clean residual mean=-0.000004 rms=0.001283 Jy/beam
! Combined flux in latest and established models = 0.295092 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 60 components and 0.295092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063326Jy  sigma=1.713190
! Fit after  self-cal, rms=0.063245Jy  sigma=1.711102
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063245Jy  sigma=1.711102
! Fit after  self-cal, rms=0.063095Jy  sigma=1.688475
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9063 mas, bmaj=1.966 mas, bpa=4.295 degrees
! Estimated noise=0.432972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000296627 Jy
! Component: 100  -  total flux cleaned = 0.000102433 Jy
! Component: 150  -  total flux cleaned = 6.6944e-06 Jy
! Component: 200  -  total flux cleaned = -4.72051e-05 Jy
! Total flux subtracted in 200 components = -4.72051e-05 Jy
! Clean residual min=-0.002336 max=0.002373 Jy/beam
! Clean residual mean=-0.000000 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.295045 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 80 components and 0.295045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063041Jy  sigma=1.687371
! Fit after  self-cal, rms=0.063037Jy  sigma=1.687237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.53035e-05 Jy
! Component: 100  -  total flux cleaned = -0.000168614 Jy
! Component: 150  -  total flux cleaned = -0.000229457 Jy
! Component: 200  -  total flux cleaned = -0.000285985 Jy
! Total flux subtracted in 200 components = -0.000285985 Jy
! Clean residual min=-0.002283 max=0.002295 Jy/beam
! Clean residual mean=-0.000000 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.294759 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.294759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063021Jy  sigma=1.686927
! Fit after  self-cal, rms=0.063018Jy  sigma=1.686905
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063018Jy  sigma=1.686905
! Fit after  self-cal, rms=0.062982Jy  sigma=1.686704
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9055 mas, bmaj=1.964 mas, bpa=4.269 degrees
! Estimated noise=0.432394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.22217e-05 Jy
! Component: 100  -  total flux cleaned = -6.44841e-05 Jy
! Component: 150  -  total flux cleaned = -9.991e-05 Jy
! Component: 200  -  total flux cleaned = -0.000100147 Jy
! Total flux subtracted in 200 components = -0.000100147 Jy
! Clean residual min=-0.002250 max=0.002269 Jy/beam
! Clean residual mean=-0.000000 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.294659 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.294659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062968Jy  sigma=1.686429
! Fit after  self-cal, rms=0.062966Jy  sigma=1.686406
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.4, 46).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001094 Jy
! Component: 100  -  total flux cleaned = 0.00104785 Jy
! Component: 150  -  total flux cleaned = 0.00104807 Jy
! Component: 200  -  total flux cleaned = 0.000968514 Jy
! Total flux subtracted in 200 components = 0.000968514 Jy
! Clean residual min=-0.001940 max=0.002151 Jy/beam
! Clean residual mean=-0.000000 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.295627 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 109 components and 0.295627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062871Jy  sigma=1.684777
! Fit after  self-cal, rms=0.062864Jy  sigma=1.684669
! Inverting map 
! Added new window around map position (-21, 30).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177959 Jy
! Component: 100  -  total flux cleaned = 0.00213812 Jy
! Component: 150  -  total flux cleaned = 0.00235606 Jy
! Component: 200  -  total flux cleaned = 0.00252772 Jy
! Total flux subtracted in 200 components = 0.00252772 Jy
! Clean residual min=-0.001638 max=0.001705 Jy/beam
! Clean residual mean=-0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.298155 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 125 components and 0.298155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062811Jy  sigma=1.683143
! Fit after  self-cal, rms=0.062809Jy  sigma=1.683069
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062809Jy  sigma=1.683069
! Fit after  self-cal, rms=0.062656Jy  sigma=1.682805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=4.136 mas, bpa=0.1671 degrees
! Estimated noise=0.550829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426453 Jy
! Component: 100  -  total flux cleaned = 0.000425858 Jy
! Component: 150  -  total flux cleaned = 0.000352963 Jy
! Component: 200  -  total flux cleaned = 0.000291138 Jy
! Total flux subtracted in 200 components = 0.000291138 Jy
! Clean residual min=-0.001421 max=0.001296 Jy/beam
! Clean residual mean=0.000000 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.298446 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 144 components and 0.298446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062645Jy  sigma=1.682537
! Fit after  self-cal, rms=0.062643Jy  sigma=1.682501
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156141 Jy
! Component: 100  -  total flux cleaned = 0.000168303 Jy
! Component: 150  -  total flux cleaned = 0.000180191 Jy
! Component: 200  -  total flux cleaned = 0.00020228 Jy
! Total flux subtracted in 200 components = 0.00020228 Jy
! Clean residual min=-0.001416 max=0.001310 Jy/beam
! Clean residual mean=0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.298648 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 155 components and 0.298648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062638Jy  sigma=1.682397
! Fit after  self-cal, rms=0.062638Jy  sigma=1.682387
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=1.964 mas, bpa=4.277 degrees
! Estimated noise=0.431663 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9049 x 1.964 at 4.277 degrees (North through East)
! Clean map  min=-0.0015866  max=0.23073 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7071 mas, bmaj=1.641 mas, bpa=4.397 degrees
! Estimated noise=0.746082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.176119 Jy
! Component: 100  -  total flux cleaned = 0.220502 Jy
! Component: 150  -  total flux cleaned = 0.242033 Jy
! Component: 200  -  total flux cleaned = 0.256209 Jy
! Total flux subtracted in 200 components = 0.256209 Jy
! Clean residual min=-0.007069 max=0.008331 Jy/beam
! Clean residual mean=-0.000002 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 0.256209 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.256209 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=1.964 mas, bpa=4.277 degrees
! Estimated noise=0.431663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166007 Jy
! Component: 100  -  total flux cleaned = 0.0253499 Jy
! Component: 150  -  total flux cleaned = 0.0304618 Jy
! Component: 200  -  total flux cleaned = 0.0339372 Jy
! Total flux subtracted in 200 components = 0.0339372 Jy
! Clean residual min=-0.002874 max=0.003152 Jy/beam
! Clean residual mean=-0.000001 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.290146 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 45 components and 0.290146 Jy
! Inverting map 
! Added new window around map position (-9, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282853 Jy
! Component: 100  -  total flux cleaned = 0.00399785 Jy
! Component: 150  -  total flux cleaned = 0.00466741 Jy
! Component: 200  -  total flux cleaned = 0.00529435 Jy
! Total flux subtracted in 200 components = 0.00529435 Jy
! Clean residual min=-0.002025 max=0.001733 Jy/beam
! Clean residual mean=-0.000000 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.29544 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 74 components and 0.29544 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=4.136 mas, bpa=0.1671 degrees
! Estimated noise=0.550829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128453 Jy
! Component: 100  -  total flux cleaned = 0.00144345 Jy
! Component: 150  -  total flux cleaned = 0.00156911 Jy
! Component: 200  -  total flux cleaned = 0.00168092 Jy
! Total flux subtracted in 200 components = 0.00168092 Jy
! Clean residual min=-0.001410 max=0.001505 Jy/beam
! Clean residual mean=-0.000000 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.297121 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150188 Jy
! Component: 100  -  total flux cleaned = 0.000263656 Jy
! Component: 150  -  total flux cleaned = 0.000386746 Jy
! Component: 200  -  total flux cleaned = 0.00047903 Jy
! Total flux subtracted in 200 components = 0.00047903 Jy
! Clean residual min=-0.001193 max=0.001360 Jy/beam
! Clean residual mean=-0.000000 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.2976 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 106 components and 0.2976 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=1.964 mas, bpa=4.277 degrees
! Estimated noise=0.431663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.97348e-06 Jy
! Component: 100  -  total flux cleaned = 4.20865e-05 Jy
! Component: 150  -  total flux cleaned = 0.000140487 Jy
! Component: 200  -  total flux cleaned = 0.000344449 Jy
! Total flux subtracted in 200 components = 0.000344449 Jy
! Clean residual min=-0.001505 max=0.001406 Jy/beam
! Clean residual mean=-0.000000 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.297945 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 124 components and 0.297945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062631Jy  sigma=1.682461
! Fit after  self-cal, rms=0.062617Jy  sigma=1.682249
wmodel /J0312+0133_X_map.mod
! wmodel: Unable to open new model file: /J0312+0133_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0312+0133_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9049 x 1.964 at 4.277 degrees (North through East)
! Clean map  min=-0.0014096  max=0.23153 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0312+0133_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.231533 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000337451 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.437239 0.437239 0.874478 1.74896 3.49791 6.99582 13.9916 27.9833 55.9666
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.231 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  686.123 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0312+0133_X_dfm.log closed on Thu May 19 23:49:52 2016