! Started logfile: /scr/pima/bg219a_uvs/J0305+0523_X_dfm.log on Thu May 19 23:49:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0305+0523_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0305+0523_X_uva.fits
! AN table 1: 41 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0305+0523
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7380 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0305+0523_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.996590Jy  sigma=26.851444
! Fit after  self-cal, rms=0.856287Jy  sigma=22.801423
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7147 mas, bmaj=1.62 mas, bpa=0.9514 degrees
! Estimated noise=0.57236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108868 Jy
! Component: 100  -  total flux cleaned = 0.143195 Jy
! Total flux subtracted in 100 components = 0.143195 Jy
! Clean residual min=-0.007573 max=0.014325 Jy/beam
! Clean residual mean=-0.000003 rms=0.002357 Jy/beam
! Combined flux in latest and established models = 0.143195 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.143195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063925Jy  sigma=1.645371
! Fit after  self-cal, rms=0.063863Jy  sigma=1.642488
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015274 Jy
! Component: 100  -  total flux cleaned = 0.0232645 Jy
! Total flux subtracted in 100 components = 0.0232645 Jy
! Clean residual min=-0.005586 max=0.007169 Jy/beam
! Clean residual mean=-0.000002 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.166459 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 22 components and 0.166459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058687Jy  sigma=1.458129
! Fit after  self-cal, rms=0.058704Jy  sigma=1.457633
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8657 mas, bmaj=1.914 mas, bpa=-0.8029 degrees
! Estimated noise=0.316487 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102168 Jy
! Component: 100  -  total flux cleaned = 0.0158112 Jy
! Component: 150  -  total flux cleaned = 0.0191923 Jy
! Component: 200  -  total flux cleaned = 0.021272 Jy
! Total flux subtracted in 200 components = 0.021272 Jy
! Clean residual min=-0.004247 max=0.003739 Jy/beam
! Clean residual mean=-0.000001 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.187731 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.187731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057155Jy  sigma=1.398999
! Fit after  self-cal, rms=0.057189Jy  sigma=1.398599
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8657 x 1.914 at -0.8029 degrees (North through East)
! Clean map  min=-0.0037669  max=0.14492 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        0.96     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        0.98     OV        1.02     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.01     NL        0.98     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.94     NL        0.98     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        0.97     OV        1.03     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.01     NL        0.98     OV        1.02     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.10     NL        0.98     OV        1.02     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.97     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.05     NL        0.97     OV        1.01     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        0.96     OV        1.01     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        0.99     OV        1.05     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.07     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.057189Jy  sigma=1.398599
! Fit after  self-cal, rms=0.057529Jy  sigma=1.391357
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8736 mas, bmaj=1.923 mas, bpa=-0.822 degrees
! Estimated noise=0.315335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000652369 Jy
! Component: 100  -  total flux cleaned = -0.000811556 Jy
! Component: 150  -  total flux cleaned = -0.000908388 Jy
! Component: 200  -  total flux cleaned = -0.00088105 Jy
! Total flux subtracted in 200 components = -0.00088105 Jy
! Clean residual min=-0.003086 max=0.003446 Jy/beam
! Clean residual mean=-0.000000 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.18685 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 44 components and 0.18685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057468Jy  sigma=1.390383
! Fit after  self-cal, rms=0.057487Jy  sigma=1.390216
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057487Jy  sigma=1.390216
! Fit after  self-cal, rms=0.058169Jy  sigma=1.378948
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8672 mas, bmaj=1.91 mas, bpa=-1.498 degrees
! Estimated noise=0.312926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000426488 Jy
! Component: 100  -  total flux cleaned = -0.000428806 Jy
! Component: 150  -  total flux cleaned = -0.000430475 Jy
! Component: 200  -  total flux cleaned = -0.000430808 Jy
! Total flux subtracted in 200 components = -0.000430808 Jy
! Clean residual min=-0.001999 max=0.002120 Jy/beam
! Clean residual mean=0.000000 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.18642 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.18642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058130Jy  sigma=1.378136
! Fit after  self-cal, rms=0.058143Jy  sigma=1.378025
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-24.6, 44.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183643 Jy
! Component: 100  -  total flux cleaned = 0.00168476 Jy
! Component: 150  -  total flux cleaned = 0.00158208 Jy
! Component: 200  -  total flux cleaned = 0.0015525 Jy
! Total flux subtracted in 200 components = 0.0015525 Jy
! Clean residual min=-0.001736 max=0.001580 Jy/beam
! Clean residual mean=0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.187972 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.187972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058060Jy  sigma=1.376043
! Fit after  self-cal, rms=0.058059Jy  sigma=1.375863
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058059Jy  sigma=1.375863
! Fit after  self-cal, rms=0.058371Jy  sigma=1.374334
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8658 mas, bmaj=1.908 mas, bpa=-1.701 degrees
! Estimated noise=0.311583 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271946 Jy
! Component: 100  -  total flux cleaned = 0.000298517 Jy
! Component: 150  -  total flux cleaned = 0.000323103 Jy
! Component: 200  -  total flux cleaned = 0.000322527 Jy
! Total flux subtracted in 200 components = 0.000322527 Jy
! Clean residual min=-0.001480 max=0.001560 Jy/beam
! Clean residual mean=0.000000 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.188295 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.188295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058344Jy  sigma=1.373695
! Fit after  self-cal, rms=0.058348Jy  sigma=1.373637
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.71385e-05 Jy
! Component: 100  -  total flux cleaned = 7.99393e-05 Jy
! Component: 150  -  total flux cleaned = 9.92087e-05 Jy
! Component: 200  -  total flux cleaned = 0.000118171 Jy
! Total flux subtracted in 200 components = 0.000118171 Jy
! Clean residual min=-0.001454 max=0.001556 Jy/beam
! Clean residual mean=0.000000 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.188413 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.188413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058333Jy  sigma=1.373317
! Fit after  self-cal, rms=0.058331Jy  sigma=1.373297
! Inverting map 
! Added new window around map position (21.6, 41.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135583 Jy
! Component: 100  -  total flux cleaned = 0.00160166 Jy
! Component: 150  -  total flux cleaned = 0.00185086 Jy
! Component: 200  -  total flux cleaned = 0.00198209 Jy
! Total flux subtracted in 200 components = 0.00198209 Jy
! Clean residual min=-0.001302 max=0.001291 Jy/beam
! Clean residual mean=0.000000 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.190395 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.190395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058285Jy  sigma=1.372298
! Fit after  self-cal, rms=0.058284Jy  sigma=1.372212
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058284Jy  sigma=1.372212
! Fit after  self-cal, rms=0.057964Jy  sigma=1.372067
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=3.963 mas, bpa=-6.051 degrees
! Estimated noise=0.390724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000622469 Jy
! Component: 100  -  total flux cleaned = 0.00105876 Jy
! Component: 150  -  total flux cleaned = 0.00140714 Jy
! Component: 200  -  total flux cleaned = 0.00162942 Jy
! Total flux subtracted in 200 components = 0.00162942 Jy
! Clean residual min=-0.001106 max=0.001013 Jy/beam
! Clean residual mean=0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.192024 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 94 components and 0.192024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057956Jy  sigma=1.371910
! Fit after  self-cal, rms=0.057955Jy  sigma=1.371879
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356466 Jy
! Component: 100  -  total flux cleaned = 0.000569058 Jy
! Component: 150  -  total flux cleaned = 0.000666553 Jy
! Component: 200  -  total flux cleaned = 0.000738675 Jy
! Total flux subtracted in 200 components = 0.000738675 Jy
! Clean residual min=-0.001057 max=0.001011 Jy/beam
! Clean residual mean=0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.192763 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 101 components and 0.192763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057952Jy  sigma=1.371821
! Fit after  self-cal, rms=0.057952Jy  sigma=1.371814
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8642 mas, bmaj=1.906 mas, bpa=-1.783 degrees
! Estimated noise=0.310314 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8642 x 1.906 at -1.783 degrees (North through East)
! Clean map  min=-0.0011231  max=0.14312 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7127 mas, bmaj=1.607 mas, bpa=-0.2483 degrees
! Estimated noise=0.561886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107457 Jy
! Component: 100  -  total flux cleaned = 0.14284 Jy
! Component: 150  -  total flux cleaned = 0.15782 Jy
! Component: 200  -  total flux cleaned = 0.165046 Jy
! Total flux subtracted in 200 components = 0.165046 Jy
! Clean residual min=-0.004916 max=0.005031 Jy/beam
! Clean residual mean=-0.000001 rms=0.001294 Jy/beam
! Combined flux in latest and established models = 0.165046 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.165046 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8642 mas, bmaj=1.906 mas, bpa=-1.783 degrees
! Estimated noise=0.310314 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00846905 Jy
! Component: 100  -  total flux cleaned = 0.0130986 Jy
! Component: 150  -  total flux cleaned = 0.0161735 Jy
! Component: 200  -  total flux cleaned = 0.0184934 Jy
! Total flux subtracted in 200 components = 0.0184934 Jy
! Clean residual min=-0.001905 max=0.002629 Jy/beam
! Clean residual mean=-0.000001 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.183539 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 45 components and 0.183539 Jy
! Inverting map 
! Added new window around map position (1, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240136 Jy
! Component: 100  -  total flux cleaned = 0.00397277 Jy
! Component: 150  -  total flux cleaned = 0.0049421 Jy
! Component: 200  -  total flux cleaned = 0.00554961 Jy
! Total flux subtracted in 200 components = 0.00554961 Jy
! Clean residual min=-0.001393 max=0.001621 Jy/beam
! Clean residual mean=0.000000 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.189089 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 65 components and 0.189089 Jy
! Inverting map 
! Added new window around map position (0, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144419 Jy
! Component: 100  -  total flux cleaned = 0.0019151 Jy
! Component: 150  -  total flux cleaned = 0.00229163 Jy
! Component: 200  -  total flux cleaned = 0.00246135 Jy
! Total flux subtracted in 200 components = 0.00246135 Jy
! Clean residual min=-0.001215 max=0.001250 Jy/beam
! Clean residual mean=0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.19155 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 87 components and 0.19155 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=3.963 mas, bpa=-6.051 degrees
! Estimated noise=0.390724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547106 Jy
! Component: 100  -  total flux cleaned = 0.000853787 Jy
! Component: 150  -  total flux cleaned = 0.000972135 Jy
! Component: 200  -  total flux cleaned = 0.00106589 Jy
! Total flux subtracted in 200 components = 0.00106589 Jy
! Clean residual min=-0.001009 max=0.000855 Jy/beam
! Clean residual mean=0.000001 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.192616 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.23875e-05 Jy
! Component: 100  -  total flux cleaned = 9.24879e-05 Jy
! Component: 150  -  total flux cleaned = 0.000140106 Jy
! Component: 200  -  total flux cleaned = 0.000177015 Jy
! Total flux subtracted in 200 components = 0.000177015 Jy
! Clean residual min=-0.000955 max=0.000857 Jy/beam
! Clean residual mean=0.000001 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.192793 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 110 components and 0.192793 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8642 mas, bmaj=1.906 mas, bpa=-1.783 degrees
! Estimated noise=0.310314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000470085 Jy
! Component: 100  -  total flux cleaned = -0.000469748 Jy
! Component: 150  -  total flux cleaned = -0.000449412 Jy
! Component: 200  -  total flux cleaned = -0.000409608 Jy
! Total flux subtracted in 200 components = -0.000409608 Jy
! Clean residual min=-0.001208 max=0.001197 Jy/beam
! Clean residual mean=0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.192383 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.192383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057917Jy  sigma=1.371159
! Fit after  self-cal, rms=0.057900Jy  sigma=1.371070
wmodel /J0305+0523_X_map.mod
! wmodel: Unable to open new model file: /J0305+0523_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0305+0523_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8642 x 1.906 at -1.783 degrees (North through East)
! Clean map  min=-0.0010729  max=0.1432 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0305+0523_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.143202 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000290201 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.607954 0.607954 1.21591 2.43182 4.86364 9.72727 19.4545 38.9091 77.8182
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  493.458 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0305+0523_X_dfm.log closed on Thu May 19 23:49:45 2016