! Started logfile: /scr/pima/bg219a_uvs/J0301+0602_X_dfm.log on Thu May 19 23:49:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0301+0602_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0301+0602_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0301+0602
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5040 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0301+0602_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022696Jy  sigma=26.209998
! Fit after  self-cal, rms=0.786987Jy  sigma=19.669459
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7115 mas, bmaj=1.648 mas, bpa=-0.638 degrees
! Estimated noise=0.583571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.159687 Jy
! Component: 100  -  total flux cleaned = 0.229385 Jy
! Total flux subtracted in 100 components = 0.229385 Jy
! Clean residual min=-0.027713 max=0.051122 Jy/beam
! Clean residual mean=-0.000012 rms=0.008450 Jy/beam
! Combined flux in latest and established models = 0.229385 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.229385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131524Jy  sigma=3.430868
! Fit after  self-cal, rms=0.129889Jy  sigma=3.399255
! Inverting map 
! Added new window around map position (1, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0564725 Jy
! Component: 100  -  total flux cleaned = 0.0920419 Jy
! Total flux subtracted in 100 components = 0.0920419 Jy
! Clean residual min=-0.016754 max=0.024884 Jy/beam
! Clean residual mean=-0.000006 rms=0.004482 Jy/beam
! Combined flux in latest and established models = 0.321427 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.321427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092567Jy  sigma=2.375787
! Fit after  self-cal, rms=0.090208Jy  sigma=2.327313
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0282538 Jy
! Component: 100  -  total flux cleaned = 0.0443254 Jy
! Total flux subtracted in 100 components = 0.0443254 Jy
! Clean residual min=-0.010546 max=0.012794 Jy/beam
! Clean residual mean=-0.000003 rms=0.002502 Jy/beam
! Combined flux in latest and established models = 0.365753 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 20 components and 0.365753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078109Jy  sigma=1.992235
! Fit after  self-cal, rms=0.076977Jy  sigma=1.968004
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134439 Jy
! Component: 100  -  total flux cleaned = 0.0206726 Jy
! Total flux subtracted in 100 components = 0.0206726 Jy
! Clean residual min=-0.007347 max=0.007571 Jy/beam
! Clean residual mean=-0.000002 rms=0.001697 Jy/beam
! Combined flux in latest and established models = 0.386425 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.386425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073795Jy  sigma=1.880195
! Fit after  self-cal, rms=0.073392Jy  sigma=1.871115
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8501 mas, bmaj=1.872 mas, bpa=-0.6074 degrees
! Estimated noise=0.427803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00985083 Jy
! Component: 100  -  total flux cleaned = 0.0151632 Jy
! Component: 150  -  total flux cleaned = 0.0164756 Jy
! Component: 200  -  total flux cleaned = 0.0175309 Jy
! Total flux subtracted in 200 components = 0.0175309 Jy
! Clean residual min=-0.005595 max=0.006414 Jy/beam
! Clean residual mean=-0.000003 rms=0.001403 Jy/beam
! Combined flux in latest and established models = 0.403956 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 31 components and 0.403956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072094Jy  sigma=1.833341
! Fit after  self-cal, rms=0.071988Jy  sigma=1.831223
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8501 x 1.872 at -0.6074 degrees (North through East)
! Clean map  min=-0.0049062  max=0.21788 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.98     NL        0.97     OV        1.05     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.97     OV        1.04     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        0.97     OV        1.02     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        0.97     OV        1.06     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        0.97     OV        1.04     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        0.99     NL        0.97     OV        1.04     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        0.99     OV        1.05     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        0.96     OV        1.06     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.97     NL        0.99     OV        1.05     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        0.96     OV        1.05     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        0.98     OV        1.08     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        0.98     OV        1.05     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.071988Jy  sigma=1.831223
! Fit after  self-cal, rms=0.071838Jy  sigma=1.810471
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8521 mas, bmaj=1.873 mas, bpa=-0.7736 degrees
! Estimated noise=0.425935 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000362335 Jy
! Component: 100  -  total flux cleaned = -0.000432681 Jy
! Component: 150  -  total flux cleaned = -0.000543867 Jy
! Component: 200  -  total flux cleaned = -0.000543323 Jy
! Total flux subtracted in 200 components = -0.000543323 Jy
! Clean residual min=-0.003759 max=0.004040 Jy/beam
! Clean residual mean=-0.000002 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.403413 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.403413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071736Jy  sigma=1.808015
! Fit after  self-cal, rms=0.071734Jy  sigma=1.807762
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071734Jy  sigma=1.807762
! Fit after  self-cal, rms=0.072185Jy  sigma=1.792555
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8478 mas, bmaj=1.855 mas, bpa=-0.8053 degrees
! Estimated noise=0.424331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000566368 Jy
! Component: 100  -  total flux cleaned = -0.000859622 Jy
! Component: 150  -  total flux cleaned = -0.000904045 Jy
! Component: 200  -  total flux cleaned = -0.000942857 Jy
! Total flux subtracted in 200 components = -0.000942857 Jy
! Clean residual min=-0.002453 max=0.002508 Jy/beam
! Clean residual mean=-0.000000 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.40247 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.40247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072087Jy  sigma=1.790573
! Fit after  self-cal, rms=0.072088Jy  sigma=1.790408
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.4, -25.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218056 Jy
! Component: 100  -  total flux cleaned = 0.00285324 Jy
! Component: 150  -  total flux cleaned = 0.00289055 Jy
! Component: 200  -  total flux cleaned = 0.00295208 Jy
! Total flux subtracted in 200 components = 0.00295208 Jy
! Clean residual min=-0.002283 max=0.001871 Jy/beam
! Clean residual mean=0.000000 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.405422 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 0.405422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072017Jy  sigma=1.788438
! Fit after  self-cal, rms=0.072010Jy  sigma=1.788307
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072010Jy  sigma=1.788307
! Fit after  self-cal, rms=0.072118Jy  sigma=1.788049
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8471 mas, bmaj=1.853 mas, bpa=-0.8633 degrees
! Estimated noise=0.423759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536844 Jy
! Component: 100  -  total flux cleaned = 0.000630742 Jy
! Component: 150  -  total flux cleaned = 0.000733085 Jy
! Component: 200  -  total flux cleaned = 0.000779361 Jy
! Total flux subtracted in 200 components = 0.000779361 Jy
! Clean residual min=-0.002305 max=0.001828 Jy/beam
! Clean residual mean=0.000000 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.406201 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 73 components and 0.406201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072092Jy  sigma=1.787544
! Fit after  self-cal, rms=0.072091Jy  sigma=1.787510
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136547 Jy
! Component: 100  -  total flux cleaned = 0.000202335 Jy
! Component: 150  -  total flux cleaned = 0.000243559 Jy
! Component: 200  -  total flux cleaned = 0.00026298 Jy
! Total flux subtracted in 200 components = 0.00026298 Jy
! Clean residual min=-0.002276 max=0.001848 Jy/beam
! Clean residual mean=0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.406464 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.406464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072077Jy  sigma=1.787258
! Fit after  self-cal, rms=0.072075Jy  sigma=1.787229
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072075Jy  sigma=1.787229
! Fit after  self-cal, rms=0.072139Jy  sigma=1.787189
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.001 mas, bmaj=3.812 mas, bpa=-5.126 degrees
! Estimated noise=0.561301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.43103e-05 Jy
! Component: 100  -  total flux cleaned = -1.14503e-05 Jy
! Component: 150  -  total flux cleaned = -2.51256e-05 Jy
! Component: 200  -  total flux cleaned = -3.7027e-05 Jy
! Total flux subtracted in 200 components = -3.7027e-05 Jy
! Clean residual min=-0.001739 max=0.001505 Jy/beam
! Clean residual mean=0.000000 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.406427 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 86 components and 0.406427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072133Jy  sigma=1.787187
! Fit after  self-cal, rms=0.072132Jy  sigma=1.787175
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.14107e-05 Jy
! Component: 100  -  total flux cleaned = 1.24415e-05 Jy
! Component: 150  -  total flux cleaned = 2.2871e-05 Jy
! Component: 200  -  total flux cleaned = 2.1735e-05 Jy
! Total flux subtracted in 200 components = 2.1735e-05 Jy
! Clean residual min=-0.001673 max=0.001501 Jy/beam
! Clean residual mean=0.000001 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.406449 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 90 components and 0.406449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072129Jy  sigma=1.787194
! Fit after  self-cal, rms=0.072127Jy  sigma=1.787186
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8468 mas, bmaj=1.852 mas, bpa=-0.8993 degrees
! Estimated noise=0.423665 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8468 x 1.852 at -0.8993 degrees (North through East)
! Clean map  min=-0.0019381  max=0.21538 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.708 mas, bmaj=1.628 mas, bpa=-1.055 degrees
! Estimated noise=0.577888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165073 Jy
! Component: 100  -  total flux cleaned = 0.246326 Jy
! Component: 150  -  total flux cleaned = 0.293985 Jy
! Component: 200  -  total flux cleaned = 0.323611 Jy
! Total flux subtracted in 200 components = 0.323611 Jy
! Clean residual min=-0.011165 max=0.016235 Jy/beam
! Clean residual mean=-0.000006 rms=0.003309 Jy/beam
! Combined flux in latest and established models = 0.323611 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.323611 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8468 mas, bmaj=1.852 mas, bpa=-0.8993 degrees
! Estimated noise=0.423665 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0307526 Jy
! Component: 100  -  total flux cleaned = 0.048494 Jy
! Component: 150  -  total flux cleaned = 0.0591072 Jy
! Component: 200  -  total flux cleaned = 0.0658573 Jy
! Total flux subtracted in 200 components = 0.0658573 Jy
! Clean residual min=-0.003522 max=0.005741 Jy/beam
! Clean residual mean=-0.000002 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.389468 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 39 components and 0.389468 Jy
! Inverting map 
! Added new window around map position (-1, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533027 Jy
! Component: 100  -  total flux cleaned = 0.00861856 Jy
! Component: 150  -  total flux cleaned = 0.0108224 Jy
! Component: 200  -  total flux cleaned = 0.0122587 Jy
! Total flux subtracted in 200 components = 0.0122587 Jy
! Clean residual min=-0.002144 max=0.002199 Jy/beam
! Clean residual mean=-0.000001 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.401727 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 57 components and 0.401727 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.001 mas, bmaj=3.812 mas, bpa=-5.126 degrees
! Estimated noise=0.561301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194368 Jy
! Component: 100  -  total flux cleaned = 0.00272996 Jy
! Component: 150  -  total flux cleaned = 0.00309625 Jy
! Component: 200  -  total flux cleaned = 0.00339082 Jy
! Total flux subtracted in 200 components = 0.00339082 Jy
! Clean residual min=-0.001644 max=0.001532 Jy/beam
! Clean residual mean=-0.000000 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.405117 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.78961e-05 Jy
! Component: 100  -  total flux cleaned = 0.000162665 Jy
! Component: 150  -  total flux cleaned = 0.000202841 Jy
! Component: 200  -  total flux cleaned = 0.000220257 Jy
! Total flux subtracted in 200 components = 0.000220257 Jy
! Clean residual min=-0.001485 max=0.001442 Jy/beam
! Clean residual mean=0.000000 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.405338 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 88 components and 0.405338 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8468 mas, bmaj=1.852 mas, bpa=-0.8993 degrees
! Estimated noise=0.423665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125717 Jy
! Component: 100  -  total flux cleaned = 0.000405888 Jy
! Component: 150  -  total flux cleaned = 0.000571115 Jy
! Component: 200  -  total flux cleaned = 0.000680581 Jy
! Total flux subtracted in 200 components = 0.000680581 Jy
! Clean residual min=-0.001870 max=0.002050 Jy/beam
! Clean residual mean=0.000000 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.406018 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 108 components and 0.406018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072172Jy  sigma=1.787654
! Fit after  self-cal, rms=0.072124Jy  sigma=1.786767
wmodel /J0301+0602_X_map.mod
! wmodel: Unable to open new model file: /J0301+0602_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0301+0602_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8468 x 1.852 at -0.8993 degrees (North through East)
! Clean map  min=-0.0015278  max=0.2154 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0301+0602_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.215396 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000447204 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.622857 0.622857 1.24571 2.49143 4.98286 9.96571 19.9314 39.8629 79.7257
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.215 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  481.651 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0301+0602_X_dfm.log closed on Thu May 19 23:49:38 2016