! Started logfile: /scr/pima/bg219a_uvs/J0244+1320_S_dfm.log on Thu May 19 23:49:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0244+1320_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0244+1320_S_uva.fits
! AN table 1: 42 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0244+1320
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0244+1320_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011718Jy  sigma=24.998613
! Fit after  self-cal, rms=0.868553Jy  sigma=21.421411
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.63 mas, bmaj=5.821 mas, bpa=-2.837 degrees
! Estimated noise=0.878463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102253 Jy
! Component: 100  -  total flux cleaned = 0.124598 Jy
! Total flux subtracted in 100 components = 0.124598 Jy
! Clean residual min=-0.006542 max=0.006998 Jy/beam
! Clean residual mean=-0.000014 rms=0.001579 Jy/beam
! Combined flux in latest and established models = 0.124598 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.124598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055766Jy  sigma=1.252503
! Fit after  self-cal, rms=0.055754Jy  sigma=1.252410
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.227 mas, bmaj=7.133 mas, bpa=-3.944 degrees
! Estimated noise=0.597503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00964882 Jy
! Component: 100  -  total flux cleaned = 0.014032 Jy
! Component: 150  -  total flux cleaned = 0.0159807 Jy
! Component: 200  -  total flux cleaned = 0.0163328 Jy
! Total flux subtracted in 200 components = 0.0163328 Jy
! Clean residual min=-0.003292 max=0.003043 Jy/beam
! Clean residual mean=-0.000005 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.140931 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.140931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054312Jy  sigma=1.210081
! Fit after  self-cal, rms=0.054362Jy  sigma=1.209860
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.227 x 7.133 at -3.944 degrees (North through East)
! Clean map  min=-0.0031083  max=0.1338 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.97     OV        1.02     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.01     NL        0.98     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.04     NL        0.94     OV        1.01     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        0.96     OV        0.98     
!   PT        1.05     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.054362Jy  sigma=1.209860
! Fit after  self-cal, rms=0.054325Jy  sigma=1.203466
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.251 mas, bmaj=7.151 mas, bpa=-4.027 degrees
! Estimated noise=0.595668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123414 Jy
! Component: 100  -  total flux cleaned = -0.00130648 Jy
! Component: 150  -  total flux cleaned = -0.00124604 Jy
! Component: 200  -  total flux cleaned = -0.00119231 Jy
! Total flux subtracted in 200 components = -0.00119231 Jy
! Clean residual min=-0.002742 max=0.002752 Jy/beam
! Clean residual mean=-0.000005 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.139739 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.139739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054269Jy  sigma=1.202317
! Fit after  self-cal, rms=0.054279Jy  sigma=1.202168
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054279Jy  sigma=1.202168
! Fit after  self-cal, rms=0.054507Jy  sigma=1.196813
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.139 mas, bpa=-4.082 degrees
! Estimated noise=0.595256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.43754e-05 Jy
! Component: 100  -  total flux cleaned = -8.59285e-05 Jy
! Component: 150  -  total flux cleaned = -8.68773e-05 Jy
! Component: 200  -  total flux cleaned = -7.63938e-05 Jy
! Total flux subtracted in 200 components = -7.63938e-05 Jy
! Clean residual min=-0.002485 max=0.002636 Jy/beam
! Clean residual mean=0.000007 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.139662 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 43 components and 0.139662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054500Jy  sigma=1.196689
! Fit after  self-cal, rms=0.054513Jy  sigma=1.196608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.00453e-05 Jy
! Component: 100  -  total flux cleaned = 9.00101e-05 Jy
! Component: 150  -  total flux cleaned = 9.00997e-05 Jy
! Component: 200  -  total flux cleaned = 9.9997e-05 Jy
! Total flux subtracted in 200 components = 9.9997e-05 Jy
! Clean residual min=-0.002476 max=0.002645 Jy/beam
! Clean residual mean=0.000007 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.139762 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 0.139762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054507Jy  sigma=1.196532
! Fit after  self-cal, rms=0.054508Jy  sigma=1.196522
! Inverting map 
! Added new window around map position (-95, 125.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192101 Jy
! Component: 100  -  total flux cleaned = 0.00183612 Jy
! Component: 150  -  total flux cleaned = 0.00179934 Jy
! Component: 200  -  total flux cleaned = 0.00182926 Jy
! Total flux subtracted in 200 components = 0.00182926 Jy
! Clean residual min=-0.002452 max=0.002436 Jy/beam
! Clean residual mean=0.000000 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.141591 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 61 components and 0.141591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054378Jy  sigma=1.194392
! Fit after  self-cal, rms=0.054374Jy  sigma=1.194245
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054374Jy  sigma=1.194245
! Fit after  self-cal, rms=0.054200Jy  sigma=1.194094
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.258 mas, bmaj=7.14 mas, bpa=-4.035 degrees
! Estimated noise=0.593936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000260656 Jy
! Component: 100  -  total flux cleaned = 0.000178642 Jy
! Component: 150  -  total flux cleaned = 0.000131696 Jy
! Component: 200  -  total flux cleaned = 0.000110313 Jy
! Total flux subtracted in 200 components = 0.000110313 Jy
! Clean residual min=-0.002412 max=0.002392 Jy/beam
! Clean residual mean=0.000003 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.141702 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.141702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054166Jy  sigma=1.193623
! Fit after  self-cal, rms=0.054165Jy  sigma=1.193598
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.51092e-05 Jy
! Component: 100  -  total flux cleaned = -8.24917e-05 Jy
! Component: 150  -  total flux cleaned = -0.000117473 Jy
! Component: 200  -  total flux cleaned = -0.000133682 Jy
! Total flux subtracted in 200 components = -0.000133682 Jy
! Clean residual min=-0.002407 max=0.002380 Jy/beam
! Clean residual mean=0.000004 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.141568 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.141568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054149Jy  sigma=1.193379
! Fit after  self-cal, rms=0.054150Jy  sigma=1.193375
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054150Jy  sigma=1.193375
! Fit after  self-cal, rms=0.054115Jy  sigma=1.193327
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.99 mas, bmaj=14.3 mas, bpa=-5.917 degrees
! Estimated noise=0.725686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251593 Jy
! Component: 100  -  total flux cleaned = -0.00031156 Jy
! Component: 150  -  total flux cleaned = -0.000296394 Jy
! Component: 200  -  total flux cleaned = -0.000296649 Jy
! Total flux subtracted in 200 components = -0.000296649 Jy
! Clean residual min=-0.001796 max=0.002045 Jy/beam
! Clean residual mean=0.000011 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.141271 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 85 components and 0.141271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054120Jy  sigma=1.193343
! Fit after  self-cal, rms=0.054117Jy  sigma=1.193304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.42574e-05 Jy
! Component: 100  -  total flux cleaned = -8.5616e-05 Jy
! Component: 150  -  total flux cleaned = -9.75987e-05 Jy
! Component: 200  -  total flux cleaned = -9.73164e-05 Jy
! Total flux subtracted in 200 components = -9.73164e-05 Jy
! Clean residual min=-0.001789 max=0.002020 Jy/beam
! Clean residual mean=0.000012 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.141174 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 88 components and 0.141174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054122Jy  sigma=1.193368
! Fit after  self-cal, rms=0.054120Jy  sigma=1.193336
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.259 mas, bmaj=7.14 mas, bpa=-3.976 degrees
! Estimated noise=0.593869 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.259 x 7.14 at -3.976 degrees (North through East)
! Clean map  min=-0.0021512  max=0.13293 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.648 mas, bmaj=5.81 mas, bpa=-2.859 degrees
! Estimated noise=0.880215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102391 Jy
! Component: 100  -  total flux cleaned = 0.124784 Jy
! Component: 150  -  total flux cleaned = 0.131312 Jy
! Component: 200  -  total flux cleaned = 0.135405 Jy
! Total flux subtracted in 200 components = 0.135405 Jy
! Clean residual min=-0.004537 max=0.004252 Jy/beam
! Clean residual mean=-0.000004 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.135405 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.135405 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.259 mas, bmaj=7.14 mas, bpa=-3.976 degrees
! Estimated noise=0.593869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362863 Jy
! Component: 100  -  total flux cleaned = 0.00504264 Jy
! Component: 150  -  total flux cleaned = 0.00523116 Jy
! Component: 200  -  total flux cleaned = 0.00539688 Jy
! Total flux subtracted in 200 components = 0.00539688 Jy
! Clean residual min=-0.002682 max=0.002558 Jy/beam
! Clean residual mean=-0.000001 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.140802 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.140802 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.99 mas, bmaj=14.3 mas, bpa=-5.917 degrees
! Estimated noise=0.725686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000703382 Jy
! Component: 100  -  total flux cleaned = 0.000623422 Jy
! Component: 150  -  total flux cleaned = 0.000572944 Jy
! Component: 200  -  total flux cleaned = 0.00057236 Jy
! Total flux subtracted in 200 components = 0.00057236 Jy
! Clean residual min=-0.001999 max=0.002140 Jy/beam
! Clean residual mean=0.000009 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.141374 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.05079e-05 Jy
! Component: 100  -  total flux cleaned = -4.01145e-05 Jy
! Component: 150  -  total flux cleaned = -7.5688e-05 Jy
! Component: 200  -  total flux cleaned = -7.55083e-05 Jy
! Total flux subtracted in 200 components = -7.55083e-05 Jy
! Clean residual min=-0.001916 max=0.002060 Jy/beam
! Clean residual mean=0.000011 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.141298 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.141298 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.259 mas, bmaj=7.14 mas, bpa=-3.976 degrees
! Estimated noise=0.593869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.95835e-05 Jy
! Component: 100  -  total flux cleaned = 2.15855e-05 Jy
! Component: 150  -  total flux cleaned = -8.09456e-05 Jy
! Component: 200  -  total flux cleaned = -0.000202794 Jy
! Total flux subtracted in 200 components = -0.000202794 Jy
! Clean residual min=-0.002403 max=0.002303 Jy/beam
! Clean residual mean=0.000005 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.141096 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.141096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054179Jy  sigma=1.194096
! Fit after  self-cal, rms=0.054163Jy  sigma=1.194059
wmodel /J0244+1320_S_map.mod
! wmodel: Unable to open new model file: /J0244+1320_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0244+1320_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.259 x 7.14 at -3.976 degrees (North through East)
! Clean map  min=-0.0022487  max=0.13283 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0244+1320_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.13283 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000564936 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.27593 1.27593 2.55185 5.1037 10.2074 20.4148 40.8296 81.6592
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.132 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  235.123 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0244+1320_S_dfm.log closed on Thu May 19 23:49:13 2016