! Started logfile: /scr/pima/bg219a_uvs/J0231-1606_X_dfm.log on Thu May 19 23:48:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0231-1606_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0231-1606_X_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J0231-1606
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 8736 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0231-1606_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999238Jy  sigma=26.618781
! Fit after  self-cal, rms=0.916851Jy  sigma=24.158463
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5853 mas, bmaj=1.576 mas, bpa=3.165 degrees
! Estimated noise=0.558882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0566586 Jy
! Component: 100  -  total flux cleaned = 0.079785 Jy
! Total flux subtracted in 100 components = 0.079785 Jy
! Clean residual min=-0.011961 max=0.017623 Jy/beam
! Clean residual mean=-0.000019 rms=0.003098 Jy/beam
! Combined flux in latest and established models = 0.079785 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.079785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071344Jy  sigma=1.870251
! Fit after  self-cal, rms=0.071011Jy  sigma=1.860848
! Inverting map 
! Added new window around map position (-0.8, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018889 Jy
! Component: 100  -  total flux cleaned = 0.0312323 Jy
! Total flux subtracted in 100 components = 0.0312323 Jy
! Clean residual min=-0.008037 max=0.012409 Jy/beam
! Clean residual mean=-0.000009 rms=0.002081 Jy/beam
! Combined flux in latest and established models = 0.111017 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.111017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062687Jy  sigma=1.587556
! Fit after  self-cal, rms=0.062125Jy  sigma=1.570566
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120281 Jy
! Component: 100  -  total flux cleaned = 0.0198624 Jy
! Total flux subtracted in 100 components = 0.0198624 Jy
! Clean residual min=-0.006661 max=0.008373 Jy/beam
! Clean residual mean=-0.000004 rms=0.001552 Jy/beam
! Combined flux in latest and established models = 0.13088 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.13088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058563Jy  sigma=1.456628
! Fit after  self-cal, rms=0.058316Jy  sigma=1.447775
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7332 mas, bmaj=1.859 mas, bpa=2.581 degrees
! Estimated noise=0.301422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108581 Jy
! Component: 100  -  total flux cleaned = 0.0174186 Jy
! Component: 150  -  total flux cleaned = 0.0216512 Jy
! Component: 200  -  total flux cleaned = 0.0240604 Jy
! Total flux subtracted in 200 components = 0.0240604 Jy
! Clean residual min=-0.005150 max=0.009556 Jy/beam
! Clean residual mean=0.000004 rms=0.001562 Jy/beam
! Combined flux in latest and established models = 0.15494 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 35 components and 0.15494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056249Jy  sigma=1.382462
! Fit after  self-cal, rms=0.056121Jy  sigma=1.379247
! Inverting map 
! Added new window around map position (-2.6, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00851254 Jy
! Component: 100  -  total flux cleaned = 0.0121888 Jy
! Component: 150  -  total flux cleaned = 0.0149137 Jy
! Component: 200  -  total flux cleaned = 0.0169984 Jy
! Total flux subtracted in 200 components = 0.0169984 Jy
! Clean residual min=-0.002953 max=0.003069 Jy/beam
! Clean residual mean=0.000004 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.171939 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 50 components and 0.171939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054944Jy  sigma=1.341129
! Fit after  self-cal, rms=0.054697Jy  sigma=1.336385
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7332 x 1.859 at 2.581 degrees (North through East)
! Clean map  min=-0.0025073  max=0.080892 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.20     NL        0.96     OV        1.04     
!   PT        0.93     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.12     NL        1.01     OV        1.04     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.10     NL        1.02     OV        1.03     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.13     NL        1.01     OV        1.03     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.02     OV        1.05     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        1.02     OV        1.06     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.87     NL        1.04     OV        1.00     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.13     NL        0.97     OV        1.04     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.92     NL        1.01     OV        1.03     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        0.91     NL        0.95     OV        1.01     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        0.86     NL        0.99     OV        1.02     
!   PT        0.95     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.054697Jy  sigma=1.336385
! Fit after  self-cal, rms=0.054364Jy  sigma=1.330092
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7342 mas, bmaj=1.862 mas, bpa=2.843 degrees
! Estimated noise=0.299063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198178 Jy
! Component: 100  -  total flux cleaned = 0.00247849 Jy
! Component: 150  -  total flux cleaned = 0.00286335 Jy
! Component: 200  -  total flux cleaned = 0.00306359 Jy
! Total flux subtracted in 200 components = 0.00306359 Jy
! Clean residual min=-0.001957 max=0.001939 Jy/beam
! Clean residual mean=0.000003 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.175002 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.175002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054230Jy  sigma=1.326709
! Fit after  self-cal, rms=0.054155Jy  sigma=1.326000
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054155Jy  sigma=1.326000
! Fit after  self-cal, rms=0.053708Jy  sigma=1.322227
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7338 mas, bmaj=1.849 mas, bpa=2.665 degrees
! Estimated noise=0.297305 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112598 Jy
! Component: 100  -  total flux cleaned = 0.00121645 Jy
! Component: 150  -  total flux cleaned = 0.00121603 Jy
! Component: 200  -  total flux cleaned = 0.00118336 Jy
! Total flux subtracted in 200 components = 0.00118336 Jy
! Clean residual min=-0.001856 max=0.001491 Jy/beam
! Clean residual mean=0.000000 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.176185 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.176185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053637Jy  sigma=1.320875
! Fit after  self-cal, rms=0.053612Jy  sigma=1.320581
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000501537 Jy
! Component: 100  -  total flux cleaned = 0.000366216 Jy
! Component: 150  -  total flux cleaned = 0.000303904 Jy
! Component: 200  -  total flux cleaned = 0.000275204 Jy
! Total flux subtracted in 200 components = 0.000275204 Jy
! Clean residual min=-0.001818 max=0.001516 Jy/beam
! Clean residual mean=0.000000 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.176461 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 0.176461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053564Jy  sigma=1.319754
! Fit after  self-cal, rms=0.053545Jy  sigma=1.319628
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053545Jy  sigma=1.319628
! Fit after  self-cal, rms=0.053184Jy  sigma=1.319487
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7329 mas, bmaj=1.842 mas, bpa=2.647 degrees
! Estimated noise=0.296072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450928 Jy
! Component: 100  -  total flux cleaned = 0.00045342 Jy
! Component: 150  -  total flux cleaned = 0.000483713 Jy
! Component: 200  -  total flux cleaned = 0.000457896 Jy
! Total flux subtracted in 200 components = 0.000457896 Jy
! Clean residual min=-0.001636 max=0.001431 Jy/beam
! Clean residual mean=-0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.176919 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.176919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053144Jy  sigma=1.318753
! Fit after  self-cal, rms=0.053129Jy  sigma=1.318655
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218416 Jy
! Component: 100  -  total flux cleaned = 0.000159407 Jy
! Component: 150  -  total flux cleaned = 0.000106679 Jy
! Component: 200  -  total flux cleaned = 8.39453e-05 Jy
! Total flux subtracted in 200 components = 8.39453e-05 Jy
! Clean residual min=-0.001575 max=0.001403 Jy/beam
! Clean residual mean=0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.177003 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.177003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053096Jy  sigma=1.318104
! Fit after  self-cal, rms=0.053086Jy  sigma=1.318033
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053086Jy  sigma=1.318033
! Fit after  self-cal, rms=0.052892Jy  sigma=1.317984
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.016 mas, bmaj=5.398 mas, bpa=-2.763 degrees
! Estimated noise=0.39073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261824 Jy
! Component: 100  -  total flux cleaned = 0.000243913 Jy
! Component: 150  -  total flux cleaned = 0.000229463 Jy
! Component: 200  -  total flux cleaned = 0.000216481 Jy
! Total flux subtracted in 200 components = 0.000216481 Jy
! Clean residual min=-0.001121 max=0.001199 Jy/beam
! Clean residual mean=0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.177219 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 88 components and 0.177219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052885Jy  sigma=1.317879
! Fit after  self-cal, rms=0.052878Jy  sigma=1.317854
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.64925e-05 Jy
! Component: 100  -  total flux cleaned = 7.00626e-05 Jy
! Component: 150  -  total flux cleaned = 5.10299e-05 Jy
! Component: 200  -  total flux cleaned = 2.76327e-05 Jy
! Total flux subtracted in 200 components = 2.76327e-05 Jy
! Clean residual min=-0.001092 max=0.001208 Jy/beam
! Clean residual mean=0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.177247 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 91 components and 0.177247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052873Jy  sigma=1.317781
! Fit after  self-cal, rms=0.052871Jy  sigma=1.317770
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7324 mas, bmaj=1.838 mas, bpa=2.631 degrees
! Estimated noise=0.295457 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7324 x 1.838 at 2.631 degrees (North through East)
! Clean map  min=-0.0013565  max=0.079523 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5861 mas, bmaj=1.554 mas, bpa=3.098 degrees
! Estimated noise=0.544673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0567049 Jy
! Component: 100  -  total flux cleaned = 0.0850362 Jy
! Component: 150  -  total flux cleaned = 0.103052 Jy
! Component: 200  -  total flux cleaned = 0.116517 Jy
! Total flux subtracted in 200 components = 0.116517 Jy
! Clean residual min=-0.007782 max=0.010127 Jy/beam
! Clean residual mean=-0.000011 rms=0.001927 Jy/beam
! Combined flux in latest and established models = 0.116517 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.116517 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7324 mas, bmaj=1.838 mas, bpa=2.631 degrees
! Estimated noise=0.295457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171785 Jy
! Component: 100  -  total flux cleaned = 0.0282907 Jy
! Component: 150  -  total flux cleaned = 0.0360781 Jy
! Component: 200  -  total flux cleaned = 0.0416172 Jy
! Total flux subtracted in 200 components = 0.0416172 Jy
! Clean residual min=-0.003706 max=0.004527 Jy/beam
! Clean residual mean=-0.000005 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.158134 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 54 components and 0.158134 Jy
! Inverting map 
! Added new window around map position (0.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0046864 Jy
! Component: 100  -  total flux cleaned = 0.00793841 Jy
! Component: 150  -  total flux cleaned = 0.010477 Jy
! Component: 200  -  total flux cleaned = 0.012488 Jy
! Total flux subtracted in 200 components = 0.012488 Jy
! Clean residual min=-0.002155 max=0.001914 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.170622 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 77 components and 0.170622 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.016 mas, bmaj=5.398 mas, bpa=-2.763 degrees
! Estimated noise=0.39073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268479 Jy
! Component: 100  -  total flux cleaned = 0.00420513 Jy
! Component: 150  -  total flux cleaned = 0.00516735 Jy
! Component: 200  -  total flux cleaned = 0.00580852 Jy
! Total flux subtracted in 200 components = 0.00580852 Jy
! Clean residual min=-0.001862 max=0.001299 Jy/beam
! Clean residual mean=0.000001 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.17643 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100633 Jy
! Component: 100  -  total flux cleaned = 0.000193933 Jy
! Component: 150  -  total flux cleaned = 0.000277939 Jy
! Component: 200  -  total flux cleaned = 0.000354641 Jy
! Total flux subtracted in 200 components = 0.000354641 Jy
! Clean residual min=-0.001693 max=0.001248 Jy/beam
! Clean residual mean=0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.176785 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.176785 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7324 mas, bmaj=1.838 mas, bpa=2.631 degrees
! Estimated noise=0.295457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00055061 Jy
! Component: 100  -  total flux cleaned = 0.00054638 Jy
! Component: 150  -  total flux cleaned = 0.000484325 Jy
! Component: 200  -  total flux cleaned = 0.000485333 Jy
! Total flux subtracted in 200 components = 0.000485333 Jy
! Clean residual min=-0.001508 max=0.001441 Jy/beam
! Clean residual mean=0.000000 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.17727 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 112 components and 0.17727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052844Jy  sigma=1.317859
! Fit after  self-cal, rms=0.052772Jy  sigma=1.317120
wmodel /J0231-1606_X_map.mod
! wmodel: Unable to open new model file: /J0231-1606_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0231-1606_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7324 x 1.838 at 2.631 degrees (North through East)
! Clean map  min=-0.0012388  max=0.076089 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0231-1606_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0760885 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000333994 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.31686 1.31686 2.63373 5.26745 10.5349 21.0698 42.1396 84.2792
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  227.814 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0231-1606_X_dfm.log closed on Thu May 19 23:49:02 2016