! Started logfile: /scr/pima/bg219a_uvs/J0226-1843_S_dfm.log on Thu May 19 23:48:41 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0226-1843_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0226-1843_S_uva.fits ! AN table 1: 56 integrations on 15 of 15 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0226-1843 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 3360 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0226-1843_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.003794Jy sigma=21.920430 ! Fit after self-cal, rms=0.925055Jy sigma=20.233159 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.204 mas, bmaj=6.056 mas, bpa=-2.817 degrees ! Estimated noise=0.914826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0595862 Jy ! Component: 100 - total flux cleaned = 0.0729439 Jy ! Total flux subtracted in 100 components = 0.0729439 Jy ! Clean residual min=-0.005962 max=0.005487 Jy/beam ! Clean residual mean=0.000003 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.0729439 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0729439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058878Jy sigma=1.209743 ! Fit after self-cal, rms=0.058776Jy sigma=1.207812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=6.811 mas, bpa=-3.232 degrees ! Estimated noise=0.566674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475619 Jy ! Component: 100 - total flux cleaned = 0.00688203 Jy ! Component: 150 - total flux cleaned = 0.0077 Jy ! Component: 200 - total flux cleaned = 0.00785378 Jy ! Total flux subtracted in 200 components = 0.00785378 Jy ! Clean residual min=-0.002880 max=0.003025 Jy/beam ! Clean residual mean=0.000008 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0807977 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.0807977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058434Jy sigma=1.199689 ! Fit after self-cal, rms=0.058466Jy sigma=1.199545 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.671 x 6.811 at -3.232 degrees (North through East) ! Clean map min=-0.0027756 max=0.077057 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.97 MK 1.00 NL 0.98 OV 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 0.99 NL 1.01 OV 0.98 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 1.00 NL 0.97 OV 1.07 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.02 MK 1.04 NL 0.86 OV 1.11 ! PT 0.99 SC 1.04 ! ! ! Fit before self-cal, rms=0.058466Jy sigma=1.199545 ! Fit after self-cal, rms=0.058045Jy sigma=1.195639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=6.804 mas, bpa=-3.232 degrees ! Estimated noise=0.563997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.55551e-06 Jy ! Component: 100 - total flux cleaned = 3.69195e-05 Jy ! Component: 150 - total flux cleaned = 8.96067e-05 Jy ! Component: 200 - total flux cleaned = 8.99362e-05 Jy ! Total flux subtracted in 200 components = 8.99362e-05 Jy ! Clean residual min=-0.002751 max=0.002752 Jy/beam ! Clean residual mean=0.000007 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0808876 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.0808876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058031Jy sigma=1.195369 ! Fit after self-cal, rms=0.058058Jy sigma=1.195068 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058058Jy sigma=1.195068 ! Fit after self-cal, rms=0.058314Jy sigma=1.193592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=6.827 mas, bpa=-3.277 degrees ! Estimated noise=0.565043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.87477e-05 Jy ! Component: 100 - total flux cleaned = -5.16652e-05 Jy ! Component: 150 - total flux cleaned = -4.80645e-06 Jy ! Component: 200 - total flux cleaned = 9.08064e-06 Jy ! Total flux subtracted in 200 components = 9.08064e-06 Jy ! Clean residual min=-0.002840 max=0.002674 Jy/beam ! Clean residual mean=0.000001 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0808967 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 24 components and 0.0808967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058303Jy sigma=1.193388 ! Fit after self-cal, rms=0.058315Jy sigma=1.193312 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.36236e-07 Jy ! Component: 100 - total flux cleaned = -1.54641e-05 Jy ! Component: 150 - total flux cleaned = -3.14984e-06 Jy ! Component: 200 - total flux cleaned = 1.85246e-05 Jy ! Total flux subtracted in 200 components = 1.85246e-05 Jy ! Clean residual min=-0.002842 max=0.002678 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0809152 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.0809152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058309Jy sigma=1.193209 ! Fit after self-cal, rms=0.058309Jy sigma=1.193196 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058309Jy sigma=1.193196 ! Fit after self-cal, rms=0.058446Jy sigma=1.193155 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=6.837 mas, bpa=-3.251 degrees ! Estimated noise=0.565425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.93706e-05 Jy ! Component: 100 - total flux cleaned = -2.70441e-05 Jy ! Component: 150 - total flux cleaned = -5.46862e-06 Jy ! Component: 200 - total flux cleaned = 4.14404e-06 Jy ! Total flux subtracted in 200 components = 4.14404e-06 Jy ! Clean residual min=-0.002840 max=0.002673 Jy/beam ! Clean residual mean=0.000001 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0809194 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0809194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058441Jy sigma=1.193054 ! Fit after self-cal, rms=0.058444Jy sigma=1.193039 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.06213e-07 Jy ! Component: 100 - total flux cleaned = -1.85583e-05 Jy ! Component: 150 - total flux cleaned = -9.65399e-06 Jy ! Component: 200 - total flux cleaned = -1.61739e-06 Jy ! Total flux subtracted in 200 components = -1.61739e-06 Jy ! Clean residual min=-0.002841 max=0.002668 Jy/beam ! Clean residual mean=0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0809178 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0809178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058441Jy sigma=1.192981 ! Fit after self-cal, rms=0.058441Jy sigma=1.192972 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058441Jy sigma=1.192972 ! Fit after self-cal, rms=0.058501Jy sigma=1.192956 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.01 mas, bmaj=17.83 mas, bpa=-4.193 degrees ! Estimated noise=0.764444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000357225 Jy ! Component: 100 - total flux cleaned = -0.000361472 Jy ! Component: 150 - total flux cleaned = -0.000375659 Jy ! Component: 200 - total flux cleaned = -0.000376357 Jy ! Total flux subtracted in 200 components = -0.000376357 Jy ! Clean residual min=-0.002493 max=0.002565 Jy/beam ! Clean residual mean=0.000002 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.0805414 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0805414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058508Jy sigma=1.193054 ! Fit after self-cal, rms=0.058502Jy sigma=1.192950 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43808e-05 Jy ! Component: 100 - total flux cleaned = -4.50835e-05 Jy ! Component: 150 - total flux cleaned = -5.88123e-05 Jy ! Component: 200 - total flux cleaned = -5.8838e-05 Jy ! Total flux subtracted in 200 components = -5.8838e-05 Jy ! Clean residual min=-0.002497 max=0.002562 Jy/beam ! Clean residual mean=0.000002 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.0804826 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0804826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058506Jy sigma=1.193019 ! Fit after self-cal, rms=0.058503Jy sigma=1.192952 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=6.842 mas, bpa=-3.216 degrees ! Estimated noise=0.56551 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.672 x 6.842 at -3.216 degrees (North through East) ! Clean map min=-0.0026902 max=0.076804 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=6.127 mas, bpa=-2.889 degrees ! Estimated noise=0.907585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589996 Jy ! Component: 100 - total flux cleaned = 0.0725172 Jy ! Component: 150 - total flux cleaned = 0.077377 Jy ! Component: 200 - total flux cleaned = 0.0785474 Jy ! Total flux subtracted in 200 components = 0.0785474 Jy ! Clean residual min=-0.004469 max=0.004738 Jy/beam ! Clean residual mean=-0.000007 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.0785474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0785474 Jy ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=6.842 mas, bpa=-3.216 degrees ! Estimated noise=0.56551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123452 Jy ! Component: 100 - total flux cleaned = 0.00143985 Jy ! Component: 150 - total flux cleaned = 0.00160481 Jy ! Component: 200 - total flux cleaned = 0.00173836 Jy ! Total flux subtracted in 200 components = 0.00173836 Jy ! Clean residual min=-0.002881 max=0.002595 Jy/beam ! Clean residual mean=0.000000 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0802857 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 19 components and 0.0802857 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.01 mas, bmaj=17.83 mas, bpa=-4.193 degrees ! Estimated noise=0.764444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141513 Jy ! Component: 100 - total flux cleaned = 0.00014148 Jy ! Component: 150 - total flux cleaned = 0.00013773 Jy ! Component: 200 - total flux cleaned = 0.000122834 Jy ! Total flux subtracted in 200 components = 0.000122834 Jy ! Clean residual min=-0.002511 max=0.002544 Jy/beam ! Clean residual mean=0.000002 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0804085 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.5088e-07 Jy ! Component: 100 - total flux cleaned = -1.19517e-05 Jy ! Component: 150 - total flux cleaned = -1.22826e-05 Jy ! Component: 200 - total flux cleaned = -2.01651e-05 Jy ! Total flux subtracted in 200 components = -2.01651e-05 Jy ! Clean residual min=-0.002503 max=0.002552 Jy/beam ! Clean residual mean=0.000002 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0803884 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0803884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=6.842 mas, bpa=-3.216 degrees ! Estimated noise=0.56551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183611 Jy ! Component: 100 - total flux cleaned = 0.000207349 Jy ! Component: 150 - total flux cleaned = 0.000179101 Jy ! Component: 200 - total flux cleaned = 0.000199935 Jy ! Total flux subtracted in 200 components = 0.000199935 Jy ! Clean residual min=-0.002826 max=0.002640 Jy/beam ! Clean residual mean=0.000001 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0805883 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0805883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058499Jy sigma=1.192831 ! Fit after self-cal, rms=0.058498Jy sigma=1.192796 wmodel /J0226-1843_S_map.mod ! wmodel: Unable to open new model file: /J0226-1843_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0226-1843_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.672 x 6.842 at -3.216 degrees (North through East) ! Clean map min=-0.0026639 max=0.077059 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0226-1843_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.077059 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000615004 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.39428 2.39428 4.78857 9.57714 19.1543 38.3085 76.6171 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.077 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 125.298 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0226-1843_S_dfm.log closed on Thu May 19 23:48:43 2016