! Started logfile: /scr/pima/bg219a_uvs/J0220-1305_X_dfm.log on Thu May 19 23:48:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0220-1305_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0220-1305_X_uva.fits
! AN table 1: 48 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.923611 visibilities/baseline/integration-bin.
! Found source: J0220-1305
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7980 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0220-1305_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018847Jy  sigma=27.029035
! Fit after  self-cal, rms=0.871190Jy  sigma=22.644480
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5883 mas, bmaj=1.568 mas, bpa=2.322 degrees
! Estimated noise=0.584503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0903801 Jy
! Component: 100  -  total flux cleaned = 0.120112 Jy
! Total flux subtracted in 100 components = 0.120112 Jy
! Clean residual min=-0.017447 max=0.027885 Jy/beam
! Clean residual mean=-0.000028 rms=0.004423 Jy/beam
! Combined flux in latest and established models = 0.120112 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.120112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085230Jy  sigma=2.248722
! Fit after  self-cal, rms=0.084918Jy  sigma=2.242603
! Inverting map 
! Added new window around map position (1, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275699 Jy
! Component: 100  -  total flux cleaned = 0.0455217 Jy
! Total flux subtracted in 100 components = 0.0455217 Jy
! Clean residual min=-0.013908 max=0.016208 Jy/beam
! Clean residual mean=-0.000015 rms=0.002917 Jy/beam
! Combined flux in latest and established models = 0.165633 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.165633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069756Jy  sigma=1.765205
! Fit after  self-cal, rms=0.068721Jy  sigma=1.738757
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7319 mas, bmaj=1.902 mas, bpa=1.437 degrees
! Estimated noise=0.314076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.025444 Jy
! Component: 100  -  total flux cleaned = 0.0412748 Jy
! Component: 150  -  total flux cleaned = 0.0518914 Jy
! Component: 200  -  total flux cleaned = 0.0590928 Jy
! Total flux subtracted in 200 components = 0.0590928 Jy
! Clean residual min=-0.009492 max=0.012197 Jy/beam
! Clean residual mean=0.000010 rms=0.002329 Jy/beam
! Combined flux in latest and established models = 0.224726 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.224726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058378Jy  sigma=1.404501
! Fit after  self-cal, rms=0.058043Jy  sigma=1.390758
! Inverting map 
! Added new window around map position (2.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118941 Jy
! Component: 100  -  total flux cleaned = 0.0182824 Jy
! Component: 150  -  total flux cleaned = 0.0231354 Jy
! Component: 200  -  total flux cleaned = 0.0263651 Jy
! Total flux subtracted in 200 components = 0.0263651 Jy
! Clean residual min=-0.004698 max=0.004793 Jy/beam
! Clean residual mean=0.000003 rms=0.001059 Jy/beam
! Combined flux in latest and established models = 0.251091 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 65 components and 0.251091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055511Jy  sigma=1.308616
! Fit after  self-cal, rms=0.055305Jy  sigma=1.302149
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7319 x 1.902 at 1.437 degrees (North through East)
! Clean map  min=-0.0041159  max=0.13431 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.97     NL        0.99     OV        1.04     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        1.00     OV        1.03     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.04     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        1.04     OV        1.02     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.97     NL        1.02     OV        1.03     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.12     NL        1.03     OV        0.99     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.03     OV        0.98     
!   PT        1.00     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.96     NL        0.99     OV        1.01     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.93     NL        1.01     OV        1.01     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        0.99     OV        1.02     
!   PT        0.95     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.97     OV        1.02     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        0.99     OV        1.02     
!   PT        0.97     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.055305Jy  sigma=1.302149
! Fit after  self-cal, rms=0.054123Jy  sigma=1.292657
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7316 mas, bmaj=1.901 mas, bpa=1.825 degrees
! Estimated noise=0.308497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031123 Jy
! Component: 100  -  total flux cleaned = 0.00356962 Jy
! Component: 150  -  total flux cleaned = 0.00379698 Jy
! Component: 200  -  total flux cleaned = 0.00385937 Jy
! Total flux subtracted in 200 components = 0.00385937 Jy
! Clean residual min=-0.003595 max=0.002740 Jy/beam
! Clean residual mean=0.000002 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.254951 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 0.254951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053834Jy  sigma=1.284817
! Fit after  self-cal, rms=0.053811Jy  sigma=1.284221
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053811Jy  sigma=1.284221
! Fit after  self-cal, rms=0.053567Jy  sigma=1.279081
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7311 mas, bmaj=1.899 mas, bpa=1.883 degrees
! Estimated noise=0.307041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155241 Jy
! Component: 100  -  total flux cleaned = 0.00173349 Jy
! Component: 150  -  total flux cleaned = 0.00173382 Jy
! Component: 200  -  total flux cleaned = 0.00173297 Jy
! Total flux subtracted in 200 components = 0.00173297 Jy
! Clean residual min=-0.002776 max=0.002162 Jy/beam
! Clean residual mean=-0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.256684 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 85 components and 0.256684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053445Jy  sigma=1.276285
! Fit after  self-cal, rms=0.053440Jy  sigma=1.276033
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000822313 Jy
! Component: 100  -  total flux cleaned = 0.000777383 Jy
! Component: 150  -  total flux cleaned = 0.000662288 Jy
! Component: 200  -  total flux cleaned = 0.000591774 Jy
! Total flux subtracted in 200 components = 0.000591774 Jy
! Clean residual min=-0.002638 max=0.001986 Jy/beam
! Clean residual mean=-0.000002 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.257275 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 92 components and 0.257275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053377Jy  sigma=1.274735
! Fit after  self-cal, rms=0.053370Jy  sigma=1.274645
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053370Jy  sigma=1.274645
! Fit after  self-cal, rms=0.052944Jy  sigma=1.274373
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7296 mas, bmaj=1.897 mas, bpa=1.854 degrees
! Estimated noise=0.305211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000751226 Jy
! Component: 100  -  total flux cleaned = 0.000825308 Jy
! Component: 150  -  total flux cleaned = 0.000760053 Jy
! Component: 200  -  total flux cleaned = 0.00073018 Jy
! Total flux subtracted in 200 components = 0.00073018 Jy
! Clean residual min=-0.002174 max=0.001899 Jy/beam
! Clean residual mean=-0.000002 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.258006 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.258005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052893Jy  sigma=1.273328
! Fit after  self-cal, rms=0.052888Jy  sigma=1.273254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387465 Jy
! Component: 100  -  total flux cleaned = 0.00029833 Jy
! Component: 150  -  total flux cleaned = 0.000214618 Jy
! Component: 200  -  total flux cleaned = 0.000160906 Jy
! Total flux subtracted in 200 components = 0.000160906 Jy
! Clean residual min=-0.002111 max=0.001860 Jy/beam
! Clean residual mean=-0.000002 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.258166 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 101 components and 0.258166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052853Jy  sigma=1.272571
! Fit after  self-cal, rms=0.052849Jy  sigma=1.272520
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052849Jy  sigma=1.272520
! Fit after  self-cal, rms=0.052598Jy  sigma=1.272434
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.992 mas, bmaj=5.438 mas, bpa=-4.5 degrees
! Estimated noise=0.402366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226082 Jy
! Component: 100  -  total flux cleaned = 0.000304401 Jy
! Component: 150  -  total flux cleaned = 0.000352359 Jy
! Component: 200  -  total flux cleaned = 0.000323274 Jy
! Total flux subtracted in 200 components = 0.000323274 Jy
! Clean residual min=-0.001020 max=0.001344 Jy/beam
! Clean residual mean=-0.000005 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.25849 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 110 components and 0.25849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052589Jy  sigma=1.272129
! Fit after  self-cal, rms=0.052579Jy  sigma=1.272047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.23678e-07 Jy
! Component: 100  -  total flux cleaned = 8.0185e-05 Jy
! Component: 150  -  total flux cleaned = 8.12195e-05 Jy
! Component: 200  -  total flux cleaned = 6.21384e-05 Jy
! Total flux subtracted in 200 components = 6.21384e-05 Jy
! Clean residual min=-0.001007 max=0.001337 Jy/beam
! Clean residual mean=-0.000005 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.258552 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 112 components and 0.258552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052573Jy  sigma=1.271852
! Fit after  self-cal, rms=0.052565Jy  sigma=1.271795
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7286 mas, bmaj=1.895 mas, bpa=1.822 degrees
! Estimated noise=0.304188 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7286 x 1.895 at 1.822 degrees (North through East)
! Clean map  min=-0.0026566  max=0.13166 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5863 mas, bmaj=1.567 mas, bpa=2.661 degrees
! Estimated noise=0.564509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0878179 Jy
! Component: 100  -  total flux cleaned = 0.123799 Jy
! Component: 150  -  total flux cleaned = 0.14831 Jy
! Component: 200  -  total flux cleaned = 0.166348 Jy
! Total flux subtracted in 200 components = 0.166348 Jy
! Clean residual min=-0.012469 max=0.012549 Jy/beam
! Clean residual mean=-0.000014 rms=0.002686 Jy/beam
! Combined flux in latest and established models = 0.166348 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.166348 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7286 mas, bmaj=1.895 mas, bpa=1.822 degrees
! Estimated noise=0.304188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246782 Jy
! Component: 100  -  total flux cleaned = 0.0404791 Jy
! Component: 150  -  total flux cleaned = 0.0519651 Jy
! Component: 200  -  total flux cleaned = 0.0607863 Jy
! Total flux subtracted in 200 components = 0.0607863 Jy
! Clean residual min=-0.006048 max=0.006087 Jy/beam
! Clean residual mean=-0.000001 rms=0.001682 Jy/beam
! Combined flux in latest and established models = 0.227134 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 64 components and 0.227134 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.992 mas, bmaj=5.438 mas, bpa=-4.5 degrees
! Estimated noise=0.402366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123842 Jy
! Component: 100  -  total flux cleaned = 0.0190721 Jy
! Component: 150  -  total flux cleaned = 0.0231435 Jy
! Component: 200  -  total flux cleaned = 0.0257871 Jy
! Total flux subtracted in 200 components = 0.0257871 Jy
! Clean residual min=-0.002167 max=0.002460 Jy/beam
! Clean residual mean=-0.000001 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.252922 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176323 Jy
! Component: 100  -  total flux cleaned = 0.0029538 Jy
! Component: 150  -  total flux cleaned = 0.00338006 Jy
! Component: 200  -  total flux cleaned = 0.00367864 Jy
! Total flux subtracted in 200 components = 0.00367864 Jy
! Clean residual min=-0.001374 max=0.001675 Jy/beam
! Clean residual mean=-0.000002 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.2566 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 105 components and 0.2566 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7286 mas, bmaj=1.895 mas, bpa=1.822 degrees
! Estimated noise=0.304188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288327 Jy
! Component: 100  -  total flux cleaned = 0.000472806 Jy
! Component: 150  -  total flux cleaned = 0.000379735 Jy
! Component: 200  -  total flux cleaned = 0.000534128 Jy
! Total flux subtracted in 200 components = 0.000534128 Jy
! Clean residual min=-0.002580 max=0.002723 Jy/beam
! Clean residual mean=-0.000002 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.257134 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 117 components and 0.257134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052778Jy  sigma=1.277906
! Fit after  self-cal, rms=0.052729Jy  sigma=1.276554
wmodel /J0220-1305_X_map.mod
! wmodel: Unable to open new model file: /J0220-1305_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0220-1305_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7286 x 1.895 at 1.822 degrees (North through East)
! Clean map  min=-0.0021762  max=0.12686 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0220-1305_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.126862 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000506569 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.19792 1.19792 2.39584 4.79168 9.58335 19.1667 38.3334 76.6668
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.126 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  250.434 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0220-1305_X_dfm.log closed on Thu May 19 23:48:24 2016