! Started logfile: /scr/pima/bg219a_uvs/J0216-1017_S_dfm.log on Thu May 19 23:48:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0216-1017_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0216-1017_S_uva.fits
! AN table 1: 57 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0216-1017
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3420 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0216-1017_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006675Jy  sigma=22.888926
! Fit after  self-cal, rms=0.881317Jy  sigma=19.985352
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.292 mas, bmaj=6.137 mas, bpa=-2.033 degrees
! Estimated noise=0.766517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0927227 Jy
! Component: 100  -  total flux cleaned = 0.113192 Jy
! Total flux subtracted in 100 components = 0.113192 Jy
! Clean residual min=-0.004972 max=0.007105 Jy/beam
! Clean residual mean=0.000010 rms=0.001568 Jy/beam
! Combined flux in latest and established models = 0.113192 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.113192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060215Jy  sigma=1.253136
! Fit after  self-cal, rms=0.060197Jy  sigma=1.252719
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.679 mas, bmaj=7.048 mas, bpa=-2.505 degrees
! Estimated noise=0.548463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00917954 Jy
! Component: 100  -  total flux cleaned = 0.0137028 Jy
! Component: 150  -  total flux cleaned = 0.0162332 Jy
! Component: 200  -  total flux cleaned = 0.0177026 Jy
! Total flux subtracted in 200 components = 0.0177026 Jy
! Clean residual min=-0.003011 max=0.003139 Jy/beam
! Clean residual mean=0.000003 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.130895 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 39 components and 0.130895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058957Jy  sigma=1.217867
! Fit after  self-cal, rms=0.058983Jy  sigma=1.217474
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.679 x 7.048 at -2.505 degrees (North through East)
! Clean map  min=-0.0027735  max=0.12015 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.00     OV        1.02     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.00     NL        1.04     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        0.96     NL        0.99     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        1.01     OV        0.93     
!   PT        0.94     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.058983Jy  sigma=1.217474
! Fit after  self-cal, rms=0.058431Jy  sigma=1.211805
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=7.065 mas, bpa=-2.547 degrees
! Estimated noise=0.546129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000378986 Jy
! Component: 100  -  total flux cleaned = 0.000319921 Jy
! Component: 150  -  total flux cleaned = 0.000294302 Jy
! Component: 200  -  total flux cleaned = 0.000294624 Jy
! Total flux subtracted in 200 components = 0.000294624 Jy
! Clean residual min=-0.002537 max=0.002815 Jy/beam
! Clean residual mean=0.000002 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.131189 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 46 components and 0.131189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058421Jy  sigma=1.211674
! Fit after  self-cal, rms=0.058443Jy  sigma=1.211590
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058443Jy  sigma=1.211590
! Fit after  self-cal, rms=0.057990Jy  sigma=1.205464
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.685 mas, bmaj=7.081 mas, bpa=-2.544 degrees
! Estimated noise=0.54602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106442 Jy
! Component: 100  -  total flux cleaned = -9.63216e-05 Jy
! Component: 150  -  total flux cleaned = -8.58792e-05 Jy
! Component: 200  -  total flux cleaned = -7.70887e-05 Jy
! Total flux subtracted in 200 components = -7.70887e-05 Jy
! Clean residual min=-0.002423 max=0.002539 Jy/beam
! Clean residual mean=0.000003 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.131112 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 49 components and 0.131112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057982Jy  sigma=1.205383
! Fit after  self-cal, rms=0.057984Jy  sigma=1.205291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (80, -38).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207609 Jy
! Component: 100  -  total flux cleaned = 0.00248528 Jy
! Component: 150  -  total flux cleaned = 0.00277694 Jy
! Component: 200  -  total flux cleaned = 0.00300671 Jy
! Total flux subtracted in 200 components = 0.00300671 Jy
! Clean residual min=-0.001973 max=0.002070 Jy/beam
! Clean residual mean=0.000003 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.134119 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.134119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057914Jy  sigma=1.203331
! Fit after  self-cal, rms=0.057908Jy  sigma=1.203222
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057908Jy  sigma=1.203222
! Fit after  self-cal, rms=0.057835Jy  sigma=1.203001
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=7.09 mas, bpa=-2.593 degrees
! Estimated noise=0.544582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00059028 Jy
! Component: 100  -  total flux cleaned = 0.000702099 Jy
! Component: 150  -  total flux cleaned = 0.000684247 Jy
! Component: 200  -  total flux cleaned = 0.000651821 Jy
! Total flux subtracted in 200 components = 0.000651821 Jy
! Clean residual min=-0.001788 max=0.001896 Jy/beam
! Clean residual mean=0.000003 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.134771 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 76 components and 0.134771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057821Jy  sigma=1.202589
! Fit after  self-cal, rms=0.057825Jy  sigma=1.202573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118725 Jy
! Component: 100  -  total flux cleaned = 0.000118294 Jy
! Component: 150  -  total flux cleaned = 8.98901e-05 Jy
! Component: 200  -  total flux cleaned = 0.000103195 Jy
! Total flux subtracted in 200 components = 0.000103195 Jy
! Clean residual min=-0.001761 max=0.001861 Jy/beam
! Clean residual mean=0.000003 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.134874 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.134874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057818Jy  sigma=1.202423
! Fit after  self-cal, rms=0.057820Jy  sigma=1.202421
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057820Jy  sigma=1.202421
! Fit after  self-cal, rms=0.057805Jy  sigma=1.202379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.043 mas, bmaj=17.51 mas, bpa=-5.206 degrees
! Estimated noise=0.724088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.52032e-05 Jy
! Component: 100  -  total flux cleaned = 8.47951e-05 Jy
! Component: 150  -  total flux cleaned = 8.64418e-05 Jy
! Component: 200  -  total flux cleaned = 6.27626e-05 Jy
! Total flux subtracted in 200 components = 6.27626e-05 Jy
! Clean residual min=-0.001290 max=0.001444 Jy/beam
! Clean residual mean=0.000006 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.134937 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 89 components and 0.134937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057807Jy  sigma=1.202388
! Fit after  self-cal, rms=0.057807Jy  sigma=1.202363
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.23182e-05 Jy
! Component: 100  -  total flux cleaned = 3.06811e-05 Jy
! Component: 150  -  total flux cleaned = 1.05528e-05 Jy
! Component: 200  -  total flux cleaned = 1.08684e-05 Jy
! Total flux subtracted in 200 components = 1.08684e-05 Jy
! Clean residual min=-0.001242 max=0.001408 Jy/beam
! Clean residual mean=0.000006 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.134948 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 93 components and 0.134948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057811Jy  sigma=1.202434
! Fit after  self-cal, rms=0.057810Jy  sigma=1.202426
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.687 mas, bmaj=7.093 mas, bpa=-2.619 degrees
! Estimated noise=0.544179 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.687 x 7.093 at -2.619 degrees (North through East)
! Clean map  min=-0.0016048  max=0.11945 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.303 mas, bmaj=6.179 mas, bpa=-2.041 degrees
! Estimated noise=0.762472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0921334 Jy
! Component: 100  -  total flux cleaned = 0.112586 Jy
! Component: 150  -  total flux cleaned = 0.119878 Jy
! Component: 200  -  total flux cleaned = 0.124359 Jy
! Total flux subtracted in 200 components = 0.124359 Jy
! Clean residual min=-0.003890 max=0.003882 Jy/beam
! Clean residual mean=0.000004 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.124359 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.124359 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.687 mas, bmaj=7.093 mas, bpa=-2.619 degrees
! Estimated noise=0.544179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353161 Jy
! Component: 100  -  total flux cleaned = 0.00562586 Jy
! Component: 150  -  total flux cleaned = 0.00684358 Jy
! Component: 200  -  total flux cleaned = 0.0077571 Jy
! Total flux subtracted in 200 components = 0.0077571 Jy
! Clean residual min=-0.002186 max=0.002234 Jy/beam
! Clean residual mean=0.000006 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.132116 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 44 components and 0.132116 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.043 mas, bmaj=17.51 mas, bpa=-5.206 degrees
! Estimated noise=0.724088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139995 Jy
! Component: 100  -  total flux cleaned = 0.00178765 Jy
! Component: 150  -  total flux cleaned = 0.00211439 Jy
! Component: 200  -  total flux cleaned = 0.00234575 Jy
! Total flux subtracted in 200 components = 0.00234575 Jy
! Clean residual min=-0.001367 max=0.001530 Jy/beam
! Clean residual mean=0.000007 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.134462 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167179 Jy
! Component: 100  -  total flux cleaned = 0.000288929 Jy
! Component: 150  -  total flux cleaned = 0.000400773 Jy
! Component: 200  -  total flux cleaned = 0.000463653 Jy
! Total flux subtracted in 200 components = 0.000463653 Jy
! Clean residual min=-0.001261 max=0.001427 Jy/beam
! Clean residual mean=0.000006 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.134925 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 79 components and 0.134925 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.687 mas, bmaj=7.093 mas, bpa=-2.619 degrees
! Estimated noise=0.544179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.49923e-05 Jy
! Component: 100  -  total flux cleaned = 9.81867e-06 Jy
! Component: 150  -  total flux cleaned = -1.28268e-05 Jy
! Component: 200  -  total flux cleaned = -5.36325e-05 Jy
! Total flux subtracted in 200 components = -5.36325e-05 Jy
! Clean residual min=-0.001804 max=0.001804 Jy/beam
! Clean residual mean=0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.134872 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.134872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057818Jy  sigma=1.202668
! Fit after  self-cal, rms=0.057814Jy  sigma=1.202629
wmodel /J0216-1017_S_map.mod
! wmodel: Unable to open new model file: /J0216-1017_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0216-1017_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.687 x 7.093 at -2.619 degrees (North through East)
! Clean map  min=-0.0016701  max=0.11997 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0216-1017_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.119967 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000466255 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.16595 1.16595 2.33191 4.66382 9.32764 18.6553 37.3105 74.6211
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.119 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  257.299 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0216-1017_S_dfm.log closed on Thu May 19 23:48:06 2016