! Started logfile: /scr/pima/bg219a_uvs/J0213+1213_S_uvs.log on Wed Apr 6 22:41:51 2016 obs /scr/pima/bg219a_uvs/J0213+1213_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0213+1213_S_uva.fits ! AN table 1: 52 integrations on 15 of 15 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0213+1213 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 3120 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0213+1213_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009365Jy sigma=25.514276 ! Fit after self-cal, rms=0.923410Jy sigma=23.305281 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=6.49 mas, bpa=-4.141 degrees ! Estimated noise=0.86116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620087 Jy ! Component: 100 - total flux cleaned = 0.0758085 Jy ! Total flux subtracted in 100 components = 0.0758085 Jy ! Clean residual min=-0.004504 max=0.005258 Jy/beam ! Clean residual mean=-0.000033 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.0758085 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0758085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054567Jy sigma=1.225650 ! Fit after self-cal, rms=0.054513Jy sigma=1.223889 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=7.187 mas, bpa=-4.468 degrees ! Estimated noise=0.534672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380572 Jy ! Component: 100 - total flux cleaned = 0.00446618 Jy ! Component: 150 - total flux cleaned = 0.00451728 Jy ! Component: 200 - total flux cleaned = 0.00451844 Jy ! Total flux subtracted in 200 components = 0.00451844 Jy ! Clean residual min=-0.002513 max=0.003356 Jy/beam ! Clean residual mean=-0.000033 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.080327 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.080327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054286Jy sigma=1.215975 ! Fit after self-cal, rms=0.054306Jy sigma=1.215790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 7.187 at -4.468 degrees (North through East) ! Clean map min=-0.0024389 max=0.07828 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 0.99 NL 1.01 OV 1.01 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 0.96 NL 0.97 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.02 MK 1.02 NL 1.01 OV 1.08 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 0.99 NL 0.98 OV 1.00 ! PT 0.97 SC 0.92 ! ! ! Fit before self-cal, rms=0.054306Jy sigma=1.215790 ! Fit after self-cal, rms=0.053725Jy sigma=1.212631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.171 mas, bpa=-4.477 degrees ! Estimated noise=0.530299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213873 Jy ! Component: 100 - total flux cleaned = 7.33107e-05 Jy ! Component: 150 - total flux cleaned = 4.30472e-05 Jy ! Component: 200 - total flux cleaned = 4.23447e-05 Jy ! Total flux subtracted in 200 components = 4.23447e-05 Jy ! Clean residual min=-0.002480 max=0.003373 Jy/beam ! Clean residual mean=-0.000025 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0803693 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0803693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053689Jy sigma=1.211523 ! Fit after self-cal, rms=0.053696Jy sigma=1.211379 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053696Jy sigma=1.211379 ! Fit after self-cal, rms=0.053429Jy sigma=1.208966 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.165 mas, bpa=-4.78 degrees ! Estimated noise=0.530042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181926 Jy ! Component: 100 - total flux cleaned = 0.000144148 Jy ! Component: 150 - total flux cleaned = 0.000112484 Jy ! Component: 200 - total flux cleaned = 8.22625e-05 Jy ! Total flux subtracted in 200 components = 8.22625e-05 Jy ! Clean residual min=-0.002295 max=0.003213 Jy/beam ! Clean residual mean=-0.000032 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0804515 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0804515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053418Jy sigma=1.208632 ! Fit after self-cal, rms=0.053432Jy sigma=1.208559 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244202 Jy ! Component: 100 - total flux cleaned = 0.00278709 Jy ! Component: 150 - total flux cleaned = 0.00288837 Jy ! Component: 200 - total flux cleaned = 0.00300316 Jy ! Total flux subtracted in 200 components = 0.00300316 Jy ! Clean residual min=-0.002109 max=0.001986 Jy/beam ! Clean residual mean=-0.000019 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0834547 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 62 components and 0.0834547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053295Jy sigma=1.205159 ! Fit after self-cal, rms=0.053273Jy sigma=1.204908 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053273Jy sigma=1.204908 ! Fit after self-cal, rms=0.052917Jy sigma=1.204697 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=7.168 mas, bpa=-4.646 degrees ! Estimated noise=0.526769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465209 Jy ! Component: 100 - total flux cleaned = 0.000494773 Jy ! Component: 150 - total flux cleaned = 0.000538843 Jy ! Component: 200 - total flux cleaned = 0.000557696 Jy ! Total flux subtracted in 200 components = 0.000557696 Jy ! Clean residual min=-0.002041 max=0.001964 Jy/beam ! Clean residual mean=-0.000012 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0840124 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.0840124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052889Jy sigma=1.204144 ! Fit after self-cal, rms=0.052889Jy sigma=1.204099 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.81499e-05 Jy ! Component: 100 - total flux cleaned = 6.39615e-05 Jy ! Component: 150 - total flux cleaned = 7.82801e-05 Jy ! Component: 200 - total flux cleaned = 0.000104954 Jy ! Total flux subtracted in 200 components = 0.000104954 Jy ! Clean residual min=-0.002041 max=0.001954 Jy/beam ! Clean residual mean=-0.000011 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0841174 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.0841174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052879Jy sigma=1.203905 ! Fit after self-cal, rms=0.052877Jy sigma=1.203893 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052877Jy sigma=1.203893 ! Fit after self-cal, rms=0.052737Jy sigma=1.203834 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.047 mas, bmaj=13.98 mas, bpa=-6.002 degrees ! Estimated noise=0.651646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329512 Jy ! Component: 100 - total flux cleaned = 0.000343081 Jy ! Component: 150 - total flux cleaned = 0.000369182 Jy ! Component: 200 - total flux cleaned = 0.000392487 Jy ! Total flux subtracted in 200 components = 0.000392487 Jy ! Clean residual min=-0.002357 max=0.002398 Jy/beam ! Clean residual mean=-0.000015 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0845098 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.0845098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052738Jy sigma=1.203763 ! Fit after self-cal, rms=0.052742Jy sigma=1.203743 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.45174e-06 Jy ! Component: 100 - total flux cleaned = 4.73341e-06 Jy ! Component: 150 - total flux cleaned = 1.41543e-05 Jy ! Component: 200 - total flux cleaned = 2.26273e-05 Jy ! Total flux subtracted in 200 components = 2.26273e-05 Jy ! Clean residual min=-0.002351 max=0.002408 Jy/beam ! Clean residual mean=-0.000015 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0845325 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.0845325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052743Jy sigma=1.203762 ! Fit after self-cal, rms=0.052743Jy sigma=1.203756 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=7.17 mas, bpa=-4.638 degrees ! Estimated noise=0.525588 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 7.17 at -4.638 degrees (North through East) ! Clean map min=-0.001948 max=0.077874 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=6.473 mas, bpa=-4.27 degrees ! Estimated noise=0.843326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607055 Jy ! Component: 100 - total flux cleaned = 0.0743871 Jy ! Component: 150 - total flux cleaned = 0.0788751 Jy ! Component: 200 - total flux cleaned = 0.0804952 Jy ! Total flux subtracted in 200 components = 0.0804952 Jy ! Clean residual min=-0.004146 max=0.003275 Jy/beam ! Clean residual mean=-0.000016 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.0804952 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0804952 Jy ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=7.17 mas, bpa=-4.638 degrees ! Estimated noise=0.525588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141177 Jy ! Component: 100 - total flux cleaned = 0.00207955 Jy ! Component: 150 - total flux cleaned = 0.0025282 Jy ! Component: 200 - total flux cleaned = 0.00286298 Jy ! Total flux subtracted in 200 components = 0.00286298 Jy ! Clean residual min=-0.002197 max=0.002120 Jy/beam ! Clean residual mean=-0.000012 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0833582 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.0833582 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.047 mas, bmaj=13.98 mas, bpa=-6.002 degrees ! Estimated noise=0.651646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905634 Jy ! Component: 100 - total flux cleaned = 0.00102102 Jy ! Component: 150 - total flux cleaned = 0.00104586 Jy ! Component: 200 - total flux cleaned = 0.00112334 Jy ! Total flux subtracted in 200 components = 0.00112334 Jy ! Clean residual min=-0.002475 max=0.002370 Jy/beam ! Clean residual mean=-0.000017 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0844815 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.10349e-05 Jy ! Component: 100 - total flux cleaned = 0.000110951 Jy ! Component: 150 - total flux cleaned = 0.000137418 Jy ! Component: 200 - total flux cleaned = 0.000150015 Jy ! Total flux subtracted in 200 components = 0.000150015 Jy ! Clean residual min=-0.002451 max=0.002399 Jy/beam ! Clean residual mean=-0.000015 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0846315 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.0846315 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=7.17 mas, bpa=-4.638 degrees ! Estimated noise=0.525588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516865 Jy ! Component: 100 - total flux cleaned = -0.000713838 Jy ! Component: 150 - total flux cleaned = -0.000815237 Jy ! Component: 200 - total flux cleaned = -0.000878069 Jy ! Total flux subtracted in 200 components = -0.000878069 Jy ! Clean residual min=-0.002103 max=0.001990 Jy/beam ! Clean residual mean=-0.000010 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0837535 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.0837535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052755Jy sigma=1.204104 ! Fit after self-cal, rms=0.052751Jy sigma=1.204037 wmodel /scr/pima/bg219a_uvs/J0213+1213_S_map.mod ! Writing 68 model components to file: /scr/pima/bg219a_uvs/J0213+1213_S_map.mod wobs /scr/pima/bg219a_uvs/J0213+1213_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J0213+1213_S_uvs.fits wwins /scr/pima/bg219a_uvs/J0213+1213_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219a_uvs/J0213+1213_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267001 Jy ! Component: 100 - total flux cleaned = -0.000266739 Jy ! Component: 150 - total flux cleaned = -0.00012018 Jy ! Component: 200 - total flux cleaned = -3.68898e-05 Jy ! Component: 250 - total flux cleaned = -8.89563e-05 Jy ! Component: 300 - total flux cleaned = -0.000163715 Jy ! Component: 350 - total flux cleaned = -0.000234241 Jy ! Component: 400 - total flux cleaned = -0.000300952 Jy ! Component: 450 - total flux cleaned = -0.000322071 Jy ! Component: 500 - total flux cleaned = -0.000384678 Jy ! Component: 550 - total flux cleaned = -0.000424708 Jy ! Component: 600 - total flux cleaned = -0.000424599 Jy ! Component: 650 - total flux cleaned = -0.000462706 Jy ! Component: 700 - total flux cleaned = -0.00049931 Jy ! Component: 750 - total flux cleaned = -0.000516593 Jy ! Component: 800 - total flux cleaned = -0.000482136 Jy ! Component: 850 - total flux cleaned = -0.000465613 Jy ! Component: 900 - total flux cleaned = -0.000433376 Jy ! Component: 950 - total flux cleaned = -0.000448975 Jy ! Component: 1000 - total flux cleaned = -0.000417898 Jy ! Component: 1050 - total flux cleaned = -0.000417831 Jy ! Component: 1100 - total flux cleaned = -0.000447622 Jy ! Component: 1150 - total flux cleaned = -0.0004478 Jy ! Component: 1200 - total flux cleaned = -0.000447633 Jy ! Component: 1250 - total flux cleaned = -0.000419531 Jy ! Component: 1300 - total flux cleaned = -0.000405706 Jy ! Component: 1350 - total flux cleaned = -0.000432526 Jy ! Component: 1400 - total flux cleaned = -0.000458816 Jy ! Component: 1450 - total flux cleaned = -0.000406954 Jy ! Component: 1500 - total flux cleaned = -0.000432441 Jy ! Component: 1550 - total flux cleaned = -0.000394966 Jy ! Component: 1600 - total flux cleaned = -0.000407397 Jy ! Component: 1650 - total flux cleaned = -0.000443802 Jy ! Component: 1700 - total flux cleaned = -0.000431507 Jy ! Component: 1750 - total flux cleaned = -0.000455188 Jy ! Component: 1800 - total flux cleaned = -0.000501726 Jy ! Component: 1850 - total flux cleaned = -0.000467224 Jy ! Component: 1900 - total flux cleaned = -0.000490147 Jy ! Component: 1950 - total flux cleaned = -0.000512575 Jy ! Component: 2000 - total flux cleaned = -0.000501664 Jy ! Component: 2050 - total flux cleaned = -0.000512549 Jy ! Component: 2100 - total flux cleaned = -0.000501856 Jy ! Component: 2150 - total flux cleaned = -0.000512471 Jy ! Component: 2200 - total flux cleaned = -0.000512593 Jy ! Component: 2250 - total flux cleaned = -0.000492056 Jy ! Component: 2300 - total flux cleaned = -0.0004818 Jy ! Component: 2350 - total flux cleaned = -0.000471772 Jy ! Component: 2400 - total flux cleaned = -0.00045165 Jy ! Component: 2450 - total flux cleaned = -0.00038195 Jy ! Component: 2500 - total flux cleaned = -0.000342552 Jy ! Component: 2550 - total flux cleaned = -0.000332794 Jy ! Component: 2600 - total flux cleaned = -0.000303607 Jy ! Component: 2650 - total flux cleaned = -0.000284303 Jy ! Component: 2700 - total flux cleaned = -0.000236769 Jy ! Component: 2750 - total flux cleaned = -0.000189597 Jy ! Component: 2800 - total flux cleaned = -0.000170839 Jy ! Component: 2850 - total flux cleaned = -0.000143167 Jy ! Component: 2900 - total flux cleaned = -0.00011558 Jy ! Component: 2950 - total flux cleaned = -7.93243e-05 Jy ! Component: 3000 - total flux cleaned = -6.13509e-05 Jy ! Component: 3050 - total flux cleaned = -1.67009e-05 Jy ! Component: 3100 - total flux cleaned = -1.67404e-05 Jy ! Component: 3150 - total flux cleaned = 9.65292e-06 Jy ! Component: 3200 - total flux cleaned = 9.75347e-06 Jy ! Component: 3250 - total flux cleaned = 1.83992e-05 Jy ! Component: 3300 - total flux cleaned = 1.83532e-05 Jy ! Component: 3350 - total flux cleaned = 1.33591e-06 Jy ! Component: 3400 - total flux cleaned = 9.76565e-06 Jy ! Component: 3450 - total flux cleaned = -1.53602e-05 Jy ! Component: 3500 - total flux cleaned = -2.36185e-05 Jy ! Component: 3550 - total flux cleaned = -2.3622e-05 Jy ! Component: 3600 - total flux cleaned = -4.8299e-05 Jy ! Component: 3650 - total flux cleaned = -5.65149e-05 Jy ! Component: 3700 - total flux cleaned = -7.27135e-05 Jy ! Component: 3750 - total flux cleaned = -5.65721e-05 Jy ! Component: 3800 - total flux cleaned = -5.66113e-05 Jy ! Component: 3850 - total flux cleaned = -6.46337e-05 Jy ! Component: 3900 - total flux cleaned = -9.64423e-05 Jy ! Component: 3950 - total flux cleaned = -9.64307e-05 Jy ! Component: 4000 - total flux cleaned = -0.000120084 Jy ! Component: 4050 - total flux cleaned = -0.000127986 Jy ! Total flux subtracted in 4096 components = -0.000167003 Jy ! Clean residual min=-0.000584 max=0.000502 Jy/beam ! Clean residual mean=0.000000 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0835865 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 335 components and 0.0835865 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J0213+1213_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 7.17 at -4.638 degrees (North through East) ! Clean map min=-0.0017069 max=0.077274 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0213+1213_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0772741 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000128984 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.500752 0.500752 1.0015 2.00301 4.00601 8.01203 16.0241 32.0481 64.0962 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.077 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 599.099 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0213+1213_S_uvs.log closed on Wed Apr 6 22:41:56 2016