! Started logfile: /scr/pima/bg219a_uvs/J0213+1213_S_dfm.log on Thu May 19 23:47:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0213+1213_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0213+1213_S_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0213+1213
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0213+1213_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009365Jy  sigma=25.514276
! Fit after  self-cal, rms=0.923410Jy  sigma=23.305281
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.793 mas, bmaj=6.49 mas, bpa=-4.141 degrees
! Estimated noise=0.86116 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0620087 Jy
! Component: 100  -  total flux cleaned = 0.0758085 Jy
! Total flux subtracted in 100 components = 0.0758085 Jy
! Clean residual min=-0.004504 max=0.005258 Jy/beam
! Clean residual mean=-0.000033 rms=0.001259 Jy/beam
! Combined flux in latest and established models = 0.0758085 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0758085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054567Jy  sigma=1.225650
! Fit after  self-cal, rms=0.054513Jy  sigma=1.223889
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.244 mas, bmaj=7.187 mas, bpa=-4.468 degrees
! Estimated noise=0.534672 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380572 Jy
! Component: 100  -  total flux cleaned = 0.00446618 Jy
! Component: 150  -  total flux cleaned = 0.00451728 Jy
! Component: 200  -  total flux cleaned = 0.00451844 Jy
! Total flux subtracted in 200 components = 0.00451844 Jy
! Clean residual min=-0.002513 max=0.003356 Jy/beam
! Clean residual mean=-0.000033 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.080327 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.080327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054286Jy  sigma=1.215975
! Fit after  self-cal, rms=0.054306Jy  sigma=1.215790
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.244 x 7.187 at -4.468 degrees (North through East)
! Clean map  min=-0.0024389  max=0.07828 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.99     NL        1.01     OV        1.01     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.96     NL        0.97     OV        0.99     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.02     NL        1.01     OV        1.08     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.99     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.054306Jy  sigma=1.215790
! Fit after  self-cal, rms=0.053725Jy  sigma=1.212631
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.234 mas, bmaj=7.171 mas, bpa=-4.477 degrees
! Estimated noise=0.530299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000213873 Jy
! Component: 100  -  total flux cleaned = 7.33107e-05 Jy
! Component: 150  -  total flux cleaned = 4.30472e-05 Jy
! Component: 200  -  total flux cleaned = 4.23447e-05 Jy
! Total flux subtracted in 200 components = 4.23447e-05 Jy
! Clean residual min=-0.002480 max=0.003373 Jy/beam
! Clean residual mean=-0.000025 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.0803693 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.0803693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053689Jy  sigma=1.211523
! Fit after  self-cal, rms=0.053696Jy  sigma=1.211379
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053696Jy  sigma=1.211379
! Fit after  self-cal, rms=0.053429Jy  sigma=1.208966
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=7.165 mas, bpa=-4.78 degrees
! Estimated noise=0.530042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181926 Jy
! Component: 100  -  total flux cleaned = 0.000144148 Jy
! Component: 150  -  total flux cleaned = 0.000112484 Jy
! Component: 200  -  total flux cleaned = 8.22625e-05 Jy
! Total flux subtracted in 200 components = 8.22625e-05 Jy
! Clean residual min=-0.002295 max=0.003213 Jy/beam
! Clean residual mean=-0.000032 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.0804515 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 35 components and 0.0804515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053418Jy  sigma=1.208632
! Fit after  self-cal, rms=0.053432Jy  sigma=1.208559
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21.5, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244202 Jy
! Component: 100  -  total flux cleaned = 0.00278709 Jy
! Component: 150  -  total flux cleaned = 0.00288837 Jy
! Component: 200  -  total flux cleaned = 0.00300316 Jy
! Total flux subtracted in 200 components = 0.00300316 Jy
! Clean residual min=-0.002109 max=0.001986 Jy/beam
! Clean residual mean=-0.000019 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.0834547 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 62 components and 0.0834547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053295Jy  sigma=1.205159
! Fit after  self-cal, rms=0.053273Jy  sigma=1.204908
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053273Jy  sigma=1.204908
! Fit after  self-cal, rms=0.052917Jy  sigma=1.204697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=7.168 mas, bpa=-4.646 degrees
! Estimated noise=0.526769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000465209 Jy
! Component: 100  -  total flux cleaned = 0.000494773 Jy
! Component: 150  -  total flux cleaned = 0.000538843 Jy
! Component: 200  -  total flux cleaned = 0.000557696 Jy
! Total flux subtracted in 200 components = 0.000557696 Jy
! Clean residual min=-0.002041 max=0.001964 Jy/beam
! Clean residual mean=-0.000012 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.0840124 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 70 components and 0.0840124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052889Jy  sigma=1.204144
! Fit after  self-cal, rms=0.052889Jy  sigma=1.204099
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.81499e-05 Jy
! Component: 100  -  total flux cleaned = 6.39615e-05 Jy
! Component: 150  -  total flux cleaned = 7.82801e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104954 Jy
! Total flux subtracted in 200 components = 0.000104954 Jy
! Clean residual min=-0.002041 max=0.001954 Jy/beam
! Clean residual mean=-0.000011 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.0841174 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.0841174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052879Jy  sigma=1.203905
! Fit after  self-cal, rms=0.052877Jy  sigma=1.203893
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052877Jy  sigma=1.203893
! Fit after  self-cal, rms=0.052737Jy  sigma=1.203834
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.047 mas, bmaj=13.98 mas, bpa=-6.002 degrees
! Estimated noise=0.651646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329512 Jy
! Component: 100  -  total flux cleaned = 0.000343081 Jy
! Component: 150  -  total flux cleaned = 0.000369182 Jy
! Component: 200  -  total flux cleaned = 0.000392487 Jy
! Total flux subtracted in 200 components = 0.000392487 Jy
! Clean residual min=-0.002357 max=0.002398 Jy/beam
! Clean residual mean=-0.000015 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.0845098 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 92 components and 0.0845098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052738Jy  sigma=1.203763
! Fit after  self-cal, rms=0.052742Jy  sigma=1.203743
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.45174e-06 Jy
! Component: 100  -  total flux cleaned = 4.73341e-06 Jy
! Component: 150  -  total flux cleaned = 1.41543e-05 Jy
! Component: 200  -  total flux cleaned = 2.26273e-05 Jy
! Total flux subtracted in 200 components = 2.26273e-05 Jy
! Clean residual min=-0.002351 max=0.002408 Jy/beam
! Clean residual mean=-0.000015 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0845325 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 103 components and 0.0845325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052743Jy  sigma=1.203762
! Fit after  self-cal, rms=0.052743Jy  sigma=1.203756
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=7.17 mas, bpa=-4.638 degrees
! Estimated noise=0.525588 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.238 x 7.17 at -4.638 degrees (North through East)
! Clean map  min=-0.001948  max=0.077874 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=6.473 mas, bpa=-4.27 degrees
! Estimated noise=0.843326 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0607055 Jy
! Component: 100  -  total flux cleaned = 0.0743871 Jy
! Component: 150  -  total flux cleaned = 0.0788751 Jy
! Component: 200  -  total flux cleaned = 0.0804952 Jy
! Total flux subtracted in 200 components = 0.0804952 Jy
! Clean residual min=-0.004146 max=0.003275 Jy/beam
! Clean residual mean=-0.000016 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.0804952 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0804952 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=7.17 mas, bpa=-4.638 degrees
! Estimated noise=0.525588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141177 Jy
! Component: 100  -  total flux cleaned = 0.00207955 Jy
! Component: 150  -  total flux cleaned = 0.0025282 Jy
! Component: 200  -  total flux cleaned = 0.00286298 Jy
! Total flux subtracted in 200 components = 0.00286298 Jy
! Clean residual min=-0.002197 max=0.002120 Jy/beam
! Clean residual mean=-0.000012 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.0833582 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 35 components and 0.0833582 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.047 mas, bmaj=13.98 mas, bpa=-6.002 degrees
! Estimated noise=0.651646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000905634 Jy
! Component: 100  -  total flux cleaned = 0.00102102 Jy
! Component: 150  -  total flux cleaned = 0.00104586 Jy
! Component: 200  -  total flux cleaned = 0.00112334 Jy
! Total flux subtracted in 200 components = 0.00112334 Jy
! Clean residual min=-0.002475 max=0.002370 Jy/beam
! Clean residual mean=-0.000017 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.0844815 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.10349e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110951 Jy
! Component: 150  -  total flux cleaned = 0.000137418 Jy
! Component: 200  -  total flux cleaned = 0.000150015 Jy
! Total flux subtracted in 200 components = 0.000150015 Jy
! Clean residual min=-0.002451 max=0.002399 Jy/beam
! Clean residual mean=-0.000015 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.0846315 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 51 components and 0.0846315 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=7.17 mas, bpa=-4.638 degrees
! Estimated noise=0.525588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000516865 Jy
! Component: 100  -  total flux cleaned = -0.000713838 Jy
! Component: 150  -  total flux cleaned = -0.000815237 Jy
! Component: 200  -  total flux cleaned = -0.000878069 Jy
! Total flux subtracted in 200 components = -0.000878069 Jy
! Clean residual min=-0.002103 max=0.001990 Jy/beam
! Clean residual mean=-0.000010 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.0837535 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.0837535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052755Jy  sigma=1.204104
! Fit after  self-cal, rms=0.052751Jy  sigma=1.204037
wmodel /J0213+1213_S_map.mod
! wmodel: Unable to open new model file: /J0213+1213_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0213+1213_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.238 x 7.17 at -4.638 degrees (North through East)
! Clean map  min=-0.00201  max=0.077506 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0213+1213_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0775058 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000485373 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.87872 1.87872 3.75745 7.51489 15.0298 30.0596 60.1192
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.077 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  159.682 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0213+1213_S_dfm.log closed on Thu May 19 23:47:52 2016