! Started logfile: /scr/pima/bg219a_uvs/J0211+1051_X_dfm.log on Thu May 19 23:47:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0211+1051_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0211+1051_X_uva.fits
! AN table 1: 28 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.952381 visibilities/baseline/integration-bin.
! Found source: J0211+1051
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6720 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0211+1051_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.511927Jy  sigma=26.207395
! Fit after  self-cal, rms=0.428081Jy  sigma=5.898351
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.661 mas, bmaj=1.576 mas, bpa=-1.52 degrees
! Estimated noise=1.17758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.692561 Jy
! Component: 100  -  total flux cleaned = 0.914155 Jy
! Total flux subtracted in 100 components = 0.914155 Jy
! Clean residual min=-0.079771 max=0.122136 Jy/beam
! Clean residual mean=0.000249 rms=0.018936 Jy/beam
! Combined flux in latest and established models = 0.914155 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.914155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.409962Jy  sigma=5.742269
! Fit after  self-cal, rms=0.409532Jy  sigma=5.734425
! Inverting map 
! Added new window around map position (0.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135745 Jy
! Component: 100  -  total flux cleaned = 0.21943 Jy
! Total flux subtracted in 100 components = 0.21943 Jy
! Clean residual min=-0.043280 max=0.064403 Jy/beam
! Clean residual mean=0.000159 rms=0.011304 Jy/beam
! Combined flux in latest and established models = 1.13358 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 1.13358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.344097Jy  sigma=3.723066
! Fit after  self-cal, rms=0.343461Jy  sigma=3.699993
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7895 mas, bmaj=1.804 mas, bpa=-2.146 degrees
! Estimated noise=0.668179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112324 Jy
! Component: 100  -  total flux cleaned = 0.179844 Jy
! Component: 150  -  total flux cleaned = 0.224783 Jy
! Component: 200  -  total flux cleaned = 0.255776 Jy
! Total flux subtracted in 200 components = 0.255776 Jy
! Clean residual min=-0.029368 max=0.046080 Jy/beam
! Clean residual mean=0.000176 rms=0.008999 Jy/beam
! Combined flux in latest and established models = 1.38936 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 42 components and 1.38936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.332525Jy  sigma=2.190832
! Fit after  self-cal, rms=0.332244Jy  sigma=2.165137
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7895 x 1.804 at -2.146 degrees (North through East)
! Clean map  min=-0.024049  max=0.98463 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.94     MK        1.04     NL        1.01     
!   OV        0.96     PT        0.96     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.98     MK        1.06     NL        1.02     
!   OV        0.97     PT        0.94     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.95     MK        1.03     NL        1.01     
!   OV        0.95     PT        0.94     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.95     MK        1.05     NL        1.00     
!   OV        0.98     PT        0.95     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.95     MK        1.04     NL        1.02     
!   OV        0.96     PT        0.94     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.95     MK        1.03     NL        1.01     
!   OV        0.95     PT        0.94     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.332244Jy  sigma=2.165137
! Fit after  self-cal, rms=0.328896Jy  sigma=2.001979
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7979 mas, bmaj=1.818 mas, bpa=-2.138 degrees
! Estimated noise=0.662098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0236821 Jy
! Component: 100  -  total flux cleaned = 0.0295724 Jy
! Component: 150  -  total flux cleaned = 0.0344572 Jy
! Component: 200  -  total flux cleaned = 0.0381532 Jy
! Total flux subtracted in 200 components = 0.0381532 Jy
! Clean residual min=-0.018624 max=0.027970 Jy/beam
! Clean residual mean=0.000067 rms=0.005507 Jy/beam
! Combined flux in latest and established models = 1.42751 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 63 components and 1.42751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.321726Jy  sigma=1.912372
! Fit after  self-cal, rms=0.321212Jy  sigma=1.888897
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.321212Jy  sigma=1.888897
! Fit after  self-cal, rms=0.320945Jy  sigma=1.873014
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.796 mas, bmaj=1.81 mas, bpa=-2.089 degrees
! Estimated noise=0.66248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158191 Jy
! Component: 100  -  total flux cleaned = 0.0227779 Jy
! Component: 150  -  total flux cleaned = 0.0267063 Jy
! Component: 200  -  total flux cleaned = 0.0298353 Jy
! Total flux subtracted in 200 components = 0.0298353 Jy
! Clean residual min=-0.016321 max=0.021473 Jy/beam
! Clean residual mean=0.000073 rms=0.004982 Jy/beam
! Combined flux in latest and established models = 1.45735 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 1.45735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.316997Jy  sigma=1.846756
! Fit after  self-cal, rms=0.316922Jy  sigma=1.837007
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-40.2, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020995 Jy
! Component: 100  -  total flux cleaned = 0.0284646 Jy
! Component: 150  -  total flux cleaned = 0.0328215 Jy
! Component: 200  -  total flux cleaned = 0.0358797 Jy
! Total flux subtracted in 200 components = 0.0358797 Jy
! Clean residual min=-0.014751 max=0.016007 Jy/beam
! Clean residual mean=0.000026 rms=0.004082 Jy/beam
! Combined flux in latest and established models = 1.49323 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 116 components and 1.49323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.309521Jy  sigma=1.797367
! Fit after  self-cal, rms=0.309273Jy  sigma=1.788028
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.309273Jy  sigma=1.788028
! Fit after  self-cal, rms=0.309096Jy  sigma=1.772315
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7938 mas, bmaj=1.807 mas, bpa=-2.091 degrees
! Estimated noise=0.663221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157329 Jy
! Component: 100  -  total flux cleaned = 0.023811 Jy
! Component: 150  -  total flux cleaned = 0.0279465 Jy
! Component: 200  -  total flux cleaned = 0.0309475 Jy
! Total flux subtracted in 200 components = 0.0309475 Jy
! Clean residual min=-0.014817 max=0.014633 Jy/beam
! Clean residual mean=0.000027 rms=0.003927 Jy/beam
! Combined flux in latest and established models = 1.52418 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 131 components and 1.52418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.303734Jy  sigma=1.751888
! Fit after  self-cal, rms=0.303626Jy  sigma=1.746212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00571147 Jy
! Component: 100  -  total flux cleaned = 0.00869772 Jy
! Component: 150  -  total flux cleaned = 0.0107642 Jy
! Component: 200  -  total flux cleaned = 0.0130117 Jy
! Total flux subtracted in 200 components = 0.0130117 Jy
! Clean residual min=-0.015031 max=0.014582 Jy/beam
! Clean residual mean=0.000024 rms=0.003813 Jy/beam
! Combined flux in latest and established models = 1.53719 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 143 components and 1.53719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.299483Jy  sigma=1.742663
! Fit after  self-cal, rms=0.299468Jy  sigma=1.739757
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.299468Jy  sigma=1.739757
! Fit after  self-cal, rms=0.300522Jy  sigma=1.721082
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.91 mas, bmaj=3.655 mas, bpa=-5.396 degrees
! Estimated noise=1.03729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017032 Jy
! Component: 100  -  total flux cleaned = 0.0215175 Jy
! Component: 150  -  total flux cleaned = 0.02589 Jy
! Component: 200  -  total flux cleaned = 0.0287691 Jy
! Total flux subtracted in 200 components = 0.0287691 Jy
! Clean residual min=-0.023260 max=0.028749 Jy/beam
! Clean residual mean=0.000037 rms=0.007819 Jy/beam
! Combined flux in latest and established models = 1.56596 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 163 components and 1.56596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.294488Jy  sigma=1.742705
! Fit after  self-cal, rms=0.294299Jy  sigma=1.734646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00458261 Jy
! Component: 100  -  total flux cleaned = 0.00737408 Jy
! Component: 150  -  total flux cleaned = 0.00945078 Jy
! Component: 200  -  total flux cleaned = 0.0116891 Jy
! Total flux subtracted in 200 components = 0.0116891 Jy
! Clean residual min=-0.023569 max=0.027067 Jy/beam
! Clean residual mean=0.000030 rms=0.007777 Jy/beam
! Combined flux in latest and established models = 1.57765 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 172 components and 1.57765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.290788Jy  sigma=1.754955
! Fit after  self-cal, rms=0.290689Jy  sigma=1.749754
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7927 mas, bmaj=1.805 mas, bpa=-2.103 degrees
! Estimated noise=0.663126 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7927 x 1.805 at -2.103 degrees (North through East)
! Clean map  min=-0.014469  max=0.92581 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.290689Jy  sigma=1.749754
! Fit after  self-cal, rms=0.290574Jy  sigma=1.672612
! Inverting map and beam 
! Estimated beam: bmin=0.7903 mas, bmaj=1.798 mas, bpa=-2.054 degrees
! Estimated noise=0.656799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00520646 Jy
! Component: 100  -  total flux cleaned = 0.00640658 Jy
! Component: 150  -  total flux cleaned = 0.0074423 Jy
! Component: 200  -  total flux cleaned = 0.0083575 Jy
! Total flux subtracted in 200 components = 0.0083575 Jy
! Clean residual min=-0.014054 max=0.014057 Jy/beam
! Clean residual mean=0.000010 rms=0.003679 Jy/beam
! Combined flux in latest and established models = 1.586 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 183 components and 1.586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.288121Jy  sigma=1.664231
! Fit after  self-cal, rms=0.288146Jy  sigma=1.661254
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342344 Jy
! Component: 100  -  total flux cleaned = 0.00523187 Jy
! Component: 150  -  total flux cleaned = 0.00606229 Jy
! Component: 200  -  total flux cleaned = 0.0068366 Jy
! Total flux subtracted in 200 components = 0.0068366 Jy
! Clean residual min=-0.013880 max=0.013687 Jy/beam
! Clean residual mean=0.000009 rms=0.003634 Jy/beam
! Combined flux in latest and established models = 1.59284 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 192 components and 1.59284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.286345Jy  sigma=1.658738
! Fit after  self-cal, rms=0.286381Jy  sigma=1.656686
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.286381Jy  sigma=1.656686
! Fit after  self-cal, rms=0.286269Jy  sigma=1.650381
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6611 mas, bmaj=1.569 mas, bpa=-1.374 degrees
! Estimated noise=1.15936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.681337 Jy
! Component: 100  -  total flux cleaned = 0.908583 Jy
! Component: 150  -  total flux cleaned = 1.0402 Jy
! Component: 200  -  total flux cleaned = 1.12537 Jy
! Total flux subtracted in 200 components = 1.12537 Jy
! Clean residual min=-0.034285 max=0.051392 Jy/beam
! Clean residual mean=0.000144 rms=0.010690 Jy/beam
! Combined flux in latest and established models = 1.12537 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.12537 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.79 mas, bmaj=1.798 mas, bpa=-2.024 degrees
! Estimated noise=0.655285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113534 Jy
! Component: 100  -  total flux cleaned = 0.188919 Jy
! Component: 150  -  total flux cleaned = 0.243484 Jy
! Component: 200  -  total flux cleaned = 0.28451 Jy
! Total flux subtracted in 200 components = 0.28451 Jy
! Clean residual min=-0.027256 max=0.034377 Jy/beam
! Clean residual mean=0.000156 rms=0.007819 Jy/beam
! Combined flux in latest and established models = 1.40988 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 73 components and 1.40988 Jy
! Inverting map 
! Added new window around map position (8.2, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0351806 Jy
! Component: 100  -  total flux cleaned = 0.0607088 Jy
! Component: 150  -  total flux cleaned = 0.0810964 Jy
! Component: 200  -  total flux cleaned = 0.0976864 Jy
! Total flux subtracted in 200 components = 0.0976864 Jy
! Clean residual min=-0.018804 max=0.019472 Jy/beam
! Clean residual mean=0.000077 rms=0.004704 Jy/beam
! Combined flux in latest and established models = 1.50757 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 117 components and 1.50757 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.907 mas, bmaj=3.642 mas, bpa=-5.366 degrees
! Estimated noise=1.03197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0300308 Jy
! Component: 100  -  total flux cleaned = 0.0481373 Jy
! Component: 150  -  total flux cleaned = 0.0606989 Jy
! Component: 200  -  total flux cleaned = 0.0696424 Jy
! Total flux subtracted in 200 components = 0.0696424 Jy
! Clean residual min=-0.024167 max=0.027461 Jy/beam
! Clean residual mean=0.000026 rms=0.008032 Jy/beam
! Combined flux in latest and established models = 1.57721 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360536 Jy
! Component: 100  -  total flux cleaned = 0.00531327 Jy
! Component: 150  -  total flux cleaned = 0.00666006 Jy
! Component: 200  -  total flux cleaned = 0.00771793 Jy
! Total flux subtracted in 200 components = 0.00771793 Jy
! Clean residual min=-0.023476 max=0.026503 Jy/beam
! Clean residual mean=0.000011 rms=0.007975 Jy/beam
! Combined flux in latest and established models = 1.58493 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 174 components and 1.58493 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.79 mas, bmaj=1.798 mas, bpa=-2.024 degrees
! Estimated noise=0.655285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00463437 Jy
! Component: 100  -  total flux cleaned = 0.0053972 Jy
! Component: 150  -  total flux cleaned = 0.00643986 Jy
! Component: 200  -  total flux cleaned = 0.00736984 Jy
! Total flux subtracted in 200 components = 0.00736984 Jy
! Clean residual min=-0.016740 max=0.015033 Jy/beam
! Clean residual mean=0.000009 rms=0.003786 Jy/beam
! Combined flux in latest and established models = 1.5923 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 191 components and 1.5923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.283233Jy  sigma=1.662168
! Fit after  self-cal, rms=0.282831Jy  sigma=1.648271
wmodel /J0211+1051_X_map.mod
! wmodel: Unable to open new model file: /J0211+1051_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0211+1051_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.79 x 1.798 at -2.024 degrees (North through East)
! Clean map  min=-0.014539  max=0.91214 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0211+1051_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.91214 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0035433 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.16538 1.16538 2.33076 4.66152 9.32305 18.6461 37.2922 74.5844
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0106 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.912 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  257.426 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0211+1051_X_dfm.log closed on Thu May 19 23:47:48 2016