! Started logfile: /scr/pima/bg219a_uvs/J0143+4129_S_dfm.log on Thu May 19 23:47:28 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0143+4129_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0143+4129_S_uva.fits ! AN table 1: 36 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.833333 visibilities/baseline/integration-bin. ! Found source: J0143+4129 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1800 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0143+4129_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025064Jy sigma=26.719890 ! Fit after self-cal, rms=0.782716Jy sigma=20.419782 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=4.522 mas, bpa=-31.62 degrees ! Estimated noise=1.06455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169698 Jy ! Component: 100 - total flux cleaned = 0.207005 Jy ! Total flux subtracted in 100 components = 0.207005 Jy ! Clean residual min=-0.007571 max=0.011636 Jy/beam ! Clean residual mean=0.000010 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.207005 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.207005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051166Jy sigma=1.229507 ! Fit after self-cal, rms=0.051174Jy sigma=1.228920 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116629 Jy ! Component: 100 - total flux cleaned = 0.0166691 Jy ! Total flux subtracted in 100 components = 0.0166691 Jy ! Clean residual min=-0.004473 max=0.004179 Jy/beam ! Clean residual mean=0.000004 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.223674 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 6 components and 0.223674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048748Jy sigma=1.164521 ! Fit after self-cal, rms=0.048734Jy sigma=1.163850 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=5.437 mas, bpa=-29.76 degrees ! Estimated noise=0.693439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226128 Jy ! Component: 100 - total flux cleaned = 0.00227452 Jy ! Component: 150 - total flux cleaned = 0.00211732 Jy ! Component: 200 - total flux cleaned = 0.00200965 Jy ! Total flux subtracted in 200 components = 0.00200965 Jy ! Clean residual min=-0.003909 max=0.004336 Jy/beam ! Clean residual mean=0.000008 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.225684 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.225684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048601Jy sigma=1.160872 ! Fit after self-cal, rms=0.048597Jy sigma=1.160752 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.614 x 5.437 at -29.76 degrees (North through East) ! Clean map min=-0.0037808 max=0.21617 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 1.05 NL 0.98 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.02 MK 0.97 NL 1.02 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 0.97 NL 0.99 OV 1.04 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 1.03 NL 0.99 OV 1.01 ! PT 0.99 SC 0.96 ! ! ! Fit before self-cal, rms=0.048597Jy sigma=1.160752 ! Fit after self-cal, rms=0.047987Jy sigma=1.152958 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=5.408 mas, bpa=-29.56 degrees ! Estimated noise=0.692279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405002 Jy ! Component: 100 - total flux cleaned = 0.000554332 Jy ! Component: 150 - total flux cleaned = 0.000486035 Jy ! Component: 200 - total flux cleaned = 0.000465558 Jy ! Total flux subtracted in 200 components = 0.000465558 Jy ! Clean residual min=-0.003706 max=0.003407 Jy/beam ! Clean residual mean=0.000008 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.226149 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.226149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047950Jy sigma=1.151886 ! Fit after self-cal, rms=0.047946Jy sigma=1.151753 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047946Jy sigma=1.151753 ! Fit after self-cal, rms=0.047808Jy sigma=1.148683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=5.415 mas, bpa=-29.58 degrees ! Estimated noise=0.692324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435524 Jy ! Component: 100 - total flux cleaned = 0.000499164 Jy ! Component: 150 - total flux cleaned = 0.000525709 Jy ! Component: 200 - total flux cleaned = 0.000560737 Jy ! Total flux subtracted in 200 components = 0.000560737 Jy ! Clean residual min=-0.003337 max=0.003045 Jy/beam ! Clean residual mean=-0.000001 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.22671 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.22671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047794Jy sigma=1.148415 ! Fit after self-cal, rms=0.047792Jy sigma=1.148364 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13927e-05 Jy ! Component: 100 - total flux cleaned = 0.000103164 Jy ! Component: 150 - total flux cleaned = 0.00010327 Jy ! Component: 200 - total flux cleaned = 0.000113829 Jy ! Total flux subtracted in 200 components = 0.000113829 Jy ! Clean residual min=-0.003306 max=0.003018 Jy/beam ! Clean residual mean=-0.000001 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.226824 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.226824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047787Jy sigma=1.148212 ! Fit after self-cal, rms=0.047785Jy sigma=1.148189 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047785Jy sigma=1.148189 ! Fit after self-cal, rms=0.047756Jy sigma=1.148111 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=5.415 mas, bpa=-29.66 degrees ! Estimated noise=0.692228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328989 Jy ! Component: 100 - total flux cleaned = 0.000397969 Jy ! Component: 150 - total flux cleaned = 0.000432967 Jy ! Component: 200 - total flux cleaned = 0.000483919 Jy ! Total flux subtracted in 200 components = 0.000483919 Jy ! Clean residual min=-0.003286 max=0.002947 Jy/beam ! Clean residual mean=-0.000001 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.227308 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.227308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047747Jy sigma=1.147966 ! Fit after self-cal, rms=0.047745Jy sigma=1.147946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.6483e-06 Jy ! Component: 100 - total flux cleaned = 2.57862e-05 Jy ! Component: 150 - total flux cleaned = 5.35429e-05 Jy ! Component: 200 - total flux cleaned = 7.07221e-05 Jy ! Total flux subtracted in 200 components = 7.07221e-05 Jy ! Clean residual min=-0.003275 max=0.002929 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.227379 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.227379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047741Jy sigma=1.147839 ! Fit after self-cal, rms=0.047740Jy sigma=1.147818 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047740Jy sigma=1.147818 ! Fit after self-cal, rms=0.047714Jy sigma=1.147758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=11.56 mas, bpa=-21.25 degrees ! Estimated noise=0.845999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439634 Jy ! Component: 100 - total flux cleaned = 0.000490897 Jy ! Component: 150 - total flux cleaned = 0.000517341 Jy ! Component: 200 - total flux cleaned = 0.000538754 Jy ! Total flux subtracted in 200 components = 0.000538754 Jy ! Clean residual min=-0.003535 max=0.003322 Jy/beam ! Clean residual mean=-0.000002 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.227917 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 41 components and 0.227917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047709Jy sigma=1.147814 ! Fit after self-cal, rms=0.047704Jy sigma=1.147728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.94585e-06 Jy ! Component: 100 - total flux cleaned = 6.49115e-06 Jy ! Component: 150 - total flux cleaned = 7.15463e-06 Jy ! Component: 200 - total flux cleaned = 7.90021e-06 Jy ! Total flux subtracted in 200 components = 7.90021e-06 Jy ! Clean residual min=-0.003519 max=0.003269 Jy/beam ! Clean residual mean=-0.000002 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.227925 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.227925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047703Jy sigma=1.147689 ! Fit after self-cal, rms=0.047700Jy sigma=1.147627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=5.415 mas, bpa=-29.72 degrees ! Estimated noise=0.692117 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 5.415 at -29.72 degrees (North through East) ! Clean map min=-0.0031515 max=0.21553 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=4.51 mas, bpa=-31.51 degrees ! Estimated noise=1.05818 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168567 Jy ! Component: 100 - total flux cleaned = 0.206301 Jy ! Component: 150 - total flux cleaned = 0.218423 Jy ! Component: 200 - total flux cleaned = 0.223228 Jy ! Total flux subtracted in 200 components = 0.223228 Jy ! Clean residual min=-0.004383 max=0.003760 Jy/beam ! Clean residual mean=0.000001 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.223228 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.223228 Jy ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=5.415 mas, bpa=-29.72 degrees ! Estimated noise=0.692117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288144 Jy ! Component: 100 - total flux cleaned = 0.00387599 Jy ! Component: 150 - total flux cleaned = 0.00407324 Jy ! Component: 200 - total flux cleaned = 0.00425171 Jy ! Total flux subtracted in 200 components = 0.00425171 Jy ! Clean residual min=-0.003406 max=0.002808 Jy/beam ! Clean residual mean=-0.000001 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.22748 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.22748 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=11.56 mas, bpa=-21.25 degrees ! Estimated noise=0.845999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353238 Jy ! Component: 100 - total flux cleaned = 0.000404038 Jy ! Component: 150 - total flux cleaned = 0.000429446 Jy ! Component: 200 - total flux cleaned = 0.000428895 Jy ! Total flux subtracted in 200 components = 0.000428895 Jy ! Clean residual min=-0.003543 max=0.003265 Jy/beam ! Clean residual mean=-0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.227908 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.2008e-06 Jy ! Component: 100 - total flux cleaned = -1.58634e-05 Jy ! Component: 150 - total flux cleaned = -2.33161e-05 Jy ! Component: 200 - total flux cleaned = -3.04278e-05 Jy ! Total flux subtracted in 200 components = -3.04278e-05 Jy ! Clean residual min=-0.003532 max=0.003258 Jy/beam ! Clean residual mean=-0.000002 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.227878 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 27 components and 0.227878 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=5.415 mas, bpa=-29.72 degrees ! Estimated noise=0.692117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190153 Jy ! Component: 100 - total flux cleaned = -0.000168071 Jy ! Component: 150 - total flux cleaned = -0.000133948 Jy ! Component: 200 - total flux cleaned = -0.000134855 Jy ! Total flux subtracted in 200 components = -0.000134855 Jy ! Clean residual min=-0.003338 max=0.002782 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.227743 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.227743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047723Jy sigma=1.148195 ! Fit after self-cal, rms=0.047723Jy sigma=1.148123 wmodel /J0143+4129_S_map.mod ! wmodel: Unable to open new model file: /J0143+4129_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0143+4129_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 5.415 at -29.72 degrees (North through East) ! Clean map min=-0.0032334 max=0.21544 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0143+4129_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.215441 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000720354 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00309 1.00309 2.00617 4.01234 8.02469 16.0494 32.0987 64.1975 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.215 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 299.077 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0143+4129_S_dfm.log closed on Thu May 19 23:47:30 2016