! Started logfile: /scr/pima/bg219a_uvs/J0141-0928_X_dfm.log on Thu May 19 23:47:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0141-0928_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0141-0928_X_uva.fits
! AN table 1: 33 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.379798 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0141-0928
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 2256 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0141-0928_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031649Jy  sigma=24.636499
! Fit after  self-cal, rms=0.807593Jy  sigma=19.143340
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.552 mas, bmaj=1.64 mas, bpa=4.225 degrees
! Estimated noise=1.0144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147321 Jy
! Component: 100  -  total flux cleaned = 0.194725 Jy
! Total flux subtracted in 100 components = 0.194725 Jy
! Clean residual min=-0.019766 max=0.024137 Jy/beam
! Clean residual mean=0.000263 rms=0.006044 Jy/beam
! Combined flux in latest and established models = 0.194725 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.194725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079300Jy  sigma=1.955766
! Fit after  self-cal, rms=0.079273Jy  sigma=1.952013
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6259 mas, bmaj=1.807 mas, bpa=3.182 degrees
! Estimated noise=0.705933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0359473 Jy
! Component: 100  -  total flux cleaned = 0.0560462 Jy
! Component: 150  -  total flux cleaned = 0.0677956 Jy
! Component: 200  -  total flux cleaned = 0.0747587 Jy
! Total flux subtracted in 200 components = 0.0747587 Jy
! Clean residual min=-0.010548 max=0.017350 Jy/beam
! Clean residual mean=0.000148 rms=0.003669 Jy/beam
! Combined flux in latest and established models = 0.269484 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 24 components and 0.269483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063971Jy  sigma=1.452144
! Fit after  self-cal, rms=0.063724Jy  sigma=1.445052
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6259 x 1.807 at 3.182 degrees (North through East)
! Clean map  min=-0.0092362  max=0.20379 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.91     MK        1.08     NL        1.05     OV        1.03     
!   PT        0.89     SC        1.15     
! 
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.06     NL        1.10     OV        1.06     
!   PT        0.88     SC        1.11     
! 
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        0.96     NL        1.09     OV        1.04     
!   PT        0.89     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.03     NL        1.04     OV        1.00     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.92     NL        1.08     OV        1.02     
!   PT        0.94     SC        1.08     
! 
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        1.06     OV        1.01     
!   PT        0.90     SC        1.07     
! 
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.02     NL        1.11     OV        1.03     
!   PT        0.92     SC        1.08     
! 
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.91     MK        0.98     NL        1.08     OV        1.05     
!   PT        0.92     SC        1.03     
! 
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        0.93     NL        1.11     OV        1.01     
!   PT        0.90     SC        1.02     
! 
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.95     NL        1.12     OV        1.04     
!   PT        0.89     SC        0.99     
! 
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.86     MK        1.02     NL        1.12     OV        1.04     
!   PT        0.93     SC        1.09     
! 
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.90     MK        1.01     NL        1.07     OV        1.03     
!   PT        0.93     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.063724Jy  sigma=1.445052
! Fit after  self-cal, rms=0.063358Jy  sigma=1.442828
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7864 mas, bmaj=1.933 mas, bpa=2.451 degrees
! Estimated noise=0.792552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115743 Jy
! Component: 100  -  total flux cleaned = 0.0125174 Jy
! Component: 150  -  total flux cleaned = 0.0115129 Jy
! Component: 200  -  total flux cleaned = 0.0116673 Jy
! Total flux subtracted in 200 components = 0.0116673 Jy
! Clean residual min=-0.005565 max=0.005512 Jy/beam
! Clean residual mean=-0.000029 rms=0.001436 Jy/beam
! Combined flux in latest and established models = 0.281151 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.281151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059643Jy  sigma=1.348263
! Fit after  self-cal, rms=0.059465Jy  sigma=1.343107
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059465Jy  sigma=1.343107
! Fit after  self-cal, rms=0.057871Jy  sigma=1.338104
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7826 mas, bmaj=1.921 mas, bpa=2.684 degrees
! Estimated noise=0.781215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00424769 Jy
! Component: 100  -  total flux cleaned = 0.00378332 Jy
! Component: 150  -  total flux cleaned = 0.00329074 Jy
! Component: 200  -  total flux cleaned = 0.00293109 Jy
! Total flux subtracted in 200 components = 0.00293109 Jy
! Clean residual min=-0.004053 max=0.004392 Jy/beam
! Clean residual mean=-0.000020 rms=0.001015 Jy/beam
! Combined flux in latest and established models = 0.284082 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.284082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057426Jy  sigma=1.327627
! Fit after  self-cal, rms=0.057394Jy  sigma=1.327031
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-23.6, -14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391885 Jy
! Component: 100  -  total flux cleaned = 0.00545436 Jy
! Component: 150  -  total flux cleaned = 0.00608176 Jy
! Component: 200  -  total flux cleaned = 0.00651903 Jy
! Total flux subtracted in 200 components = 0.00651903 Jy
! Clean residual min=-0.003271 max=0.003225 Jy/beam
! Clean residual mean=-0.000009 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.290601 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.290601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057075Jy  sigma=1.319422
! Fit after  self-cal, rms=0.057023Jy  sigma=1.318428
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057023Jy  sigma=1.318428
! Fit after  self-cal, rms=0.056657Jy  sigma=1.317834
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7818 mas, bmaj=1.919 mas, bpa=2.719 degrees
! Estimated noise=0.777801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183563 Jy
! Component: 100  -  total flux cleaned = 0.00241079 Jy
! Component: 150  -  total flux cleaned = 0.00258349 Jy
! Component: 200  -  total flux cleaned = 0.00250689 Jy
! Total flux subtracted in 200 components = 0.00250689 Jy
! Clean residual min=-0.002868 max=0.002670 Jy/beam
! Clean residual mean=-0.000007 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.293108 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.293108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056562Jy  sigma=1.315735
! Fit after  self-cal, rms=0.056548Jy  sigma=1.315508
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000893484 Jy
! Component: 100  -  total flux cleaned = 0.00107043 Jy
! Component: 150  -  total flux cleaned = 0.00106988 Jy
! Component: 200  -  total flux cleaned = 0.00107024 Jy
! Total flux subtracted in 200 components = 0.00107024 Jy
! Clean residual min=-0.002735 max=0.002407 Jy/beam
! Clean residual mean=-0.000006 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.294178 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 0.294178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056505Jy  sigma=1.314575
! Fit after  self-cal, rms=0.056502Jy  sigma=1.314510
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056502Jy  sigma=1.314510
! Fit after  self-cal, rms=0.056428Jy  sigma=1.314420
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=5.33 mas, bpa=2.185 degrees
! Estimated noise=0.97273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000881776 Jy
! Component: 100  -  total flux cleaned = 0.00142834 Jy
! Component: 150  -  total flux cleaned = 0.00179377 Jy
! Component: 200  -  total flux cleaned = 0.00192487 Jy
! Total flux subtracted in 200 components = 0.00192487 Jy
! Clean residual min=-0.001628 max=0.001518 Jy/beam
! Clean residual mean=-0.000006 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.296103 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 90 components and 0.296103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056426Jy  sigma=1.314166
! Fit after  self-cal, rms=0.056423Jy  sigma=1.314105
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484482 Jy
! Component: 100  -  total flux cleaned = 0.000764114 Jy
! Component: 150  -  total flux cleaned = 0.000821825 Jy
! Component: 200  -  total flux cleaned = 0.000877425 Jy
! Total flux subtracted in 200 components = 0.000877425 Jy
! Clean residual min=-0.001640 max=0.001464 Jy/beam
! Clean residual mean=-0.000004 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.29698 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 93 components and 0.29698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056428Jy  sigma=1.314113
! Fit after  self-cal, rms=0.056427Jy  sigma=1.314091
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7816 mas, bmaj=1.918 mas, bpa=2.729 degrees
! Estimated noise=0.777196 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7816 x 1.918 at 2.729 degrees (North through East)
! Clean map  min=-0.0049349  max=0.21311 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6202 mas, bmaj=1.645 mas, bpa=4.495 degrees
! Estimated noise=1.18189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.149688 Jy
! Component: 100  -  total flux cleaned = 0.198073 Jy
! Component: 150  -  total flux cleaned = 0.22398 Jy
! Component: 200  -  total flux cleaned = 0.241049 Jy
! Total flux subtracted in 200 components = 0.241049 Jy
! Clean residual min=-0.011822 max=0.014165 Jy/beam
! Clean residual mean=0.000113 rms=0.003526 Jy/beam
! Combined flux in latest and established models = 0.241049 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.241049 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7816 mas, bmaj=1.918 mas, bpa=2.729 degrees
! Estimated noise=0.777196 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199782 Jy
! Component: 100  -  total flux cleaned = 0.03134 Jy
! Component: 150  -  total flux cleaned = 0.0385526 Jy
! Component: 200  -  total flux cleaned = 0.0427407 Jy
! Total flux subtracted in 200 components = 0.0427407 Jy
! Clean residual min=-0.005233 max=0.004980 Jy/beam
! Clean residual mean=0.000011 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.28379 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 0.28379 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=5.33 mas, bpa=2.185 degrees
! Estimated noise=0.97273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558557 Jy
! Component: 100  -  total flux cleaned = 0.00863068 Jy
! Component: 150  -  total flux cleaned = 0.0102877 Jy
! Component: 200  -  total flux cleaned = 0.0115366 Jy
! Total flux subtracted in 200 components = 0.0115366 Jy
! Clean residual min=-0.002703 max=0.001861 Jy/beam
! Clean residual mean=-0.000010 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.295327 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000843444 Jy
! Component: 100  -  total flux cleaned = 0.00162626 Jy
! Component: 150  -  total flux cleaned = 0.00218609 Jy
! Component: 200  -  total flux cleaned = 0.00254579 Jy
! Total flux subtracted in 200 components = 0.00254579 Jy
! Clean residual min=-0.002029 max=0.001685 Jy/beam
! Clean residual mean=-0.000012 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.297873 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.297873 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7816 mas, bmaj=1.918 mas, bpa=2.729 degrees
! Estimated noise=0.777196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000573454 Jy
! Component: 100  -  total flux cleaned = 0.000719165 Jy
! Component: 150  -  total flux cleaned = 0.00119127 Jy
! Component: 200  -  total flux cleaned = 0.00147295 Jy
! Total flux subtracted in 200 components = 0.00147295 Jy
! Clean residual min=-0.002945 max=0.002590 Jy/beam
! Clean residual mean=-0.000011 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.299346 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.299346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056492Jy  sigma=1.315557
! Fit after  self-cal, rms=0.056478Jy  sigma=1.315094
wmodel /J0141-0928_X_map.mod
! wmodel: Unable to open new model file: /J0141-0928_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0141-0928_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7816 x 1.918 at 2.729 degrees (North through East)
! Clean map  min=-0.0026605  max=0.21208 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0141-0928_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.212084 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00064074 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.906348 0.906348 1.8127 3.62539 7.25078 14.5016 29.0031 58.0063
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.212 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  330.998 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0141-0928_X_dfm.log closed on Thu May 19 23:47:27 2016