! Started logfile: /scr/pima/bg219a_uvs/J0140+4342_S_uvs.log on Wed Apr  6 22:41:22 2016
obs /scr/pima/bg219a_uvs/J0140+4342_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0140+4342_S_uva.fits
! AN table 1: 48 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J0140+4342
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2400 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J0140+4342_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.991017Jy  sigma=26.526804
! Fit after  self-cal, rms=0.861180Jy  sigma=22.955240
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.86 mas, bmaj=4.779 mas, bpa=-34.35 degrees
! Estimated noise=0.873191 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104764 Jy
! Component: 100  -  total flux cleaned = 0.130454 Jy
! Total flux subtracted in 100 components = 0.130454 Jy
! Clean residual min=-0.007660 max=0.010797 Jy/beam
! Clean residual mean=0.000010 rms=0.002283 Jy/beam
! Combined flux in latest and established models = 0.130454 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.130454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053710Jy  sigma=1.326514
! Fit after  self-cal, rms=0.053715Jy  sigma=1.326043
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.611 mas, bmaj=5.402 mas, bpa=-31.16 degrees
! Estimated noise=0.552495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160886 Jy
! Component: 100  -  total flux cleaned = 0.0232574 Jy
! Component: 150  -  total flux cleaned = 0.0267042 Jy
! Component: 200  -  total flux cleaned = 0.0287497 Jy
! Total flux subtracted in 200 components = 0.0287497 Jy
! Clean residual min=-0.004137 max=0.004524 Jy/beam
! Clean residual mean=0.000009 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.159203 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 20 components and 0.159203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049517Jy  sigma=1.193341
! Fit after  self-cal, rms=0.049541Jy  sigma=1.192452
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.611 x 5.402 at -31.16 degrees (North through East)
! Clean map  min=-0.0039416  max=0.14004 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.02     NL        1.00     OV        1.04     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.97     NL        0.99     OV        1.04     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.01     OV        1.03     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.049541Jy  sigma=1.192452
! Fit after  self-cal, rms=0.049210Jy  sigma=1.186256
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.618 mas, bmaj=5.418 mas, bpa=-31.14 degrees
! Estimated noise=0.54995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000406434 Jy
! Component: 100  -  total flux cleaned = -0.000446697 Jy
! Component: 150  -  total flux cleaned = -0.000411178 Jy
! Component: 200  -  total flux cleaned = -0.000411092 Jy
! Total flux subtracted in 200 components = -0.000411092 Jy
! Clean residual min=-0.003240 max=0.003532 Jy/beam
! Clean residual mean=0.000009 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.158792 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 24 components and 0.158792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049160Jy  sigma=1.184669
! Fit after  self-cal, rms=0.049167Jy  sigma=1.184580
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049167Jy  sigma=1.184580
! Fit after  self-cal, rms=0.048894Jy  sigma=1.176354
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.622 mas, bmaj=5.373 mas, bpa=-31.12 degrees
! Estimated noise=0.54874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000416515 Jy
! Component: 100  -  total flux cleaned = -0.000397757 Jy
! Component: 150  -  total flux cleaned = -0.000413717 Jy
! Component: 200  -  total flux cleaned = -0.000428278 Jy
! Total flux subtracted in 200 components = -0.000428278 Jy
! Clean residual min=-0.002852 max=0.002757 Jy/beam
! Clean residual mean=0.000003 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.158364 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 33 components and 0.158364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048874Jy  sigma=1.176056
! Fit after  self-cal, rms=0.048877Jy  sigma=1.175909
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145406 Jy
! Component: 100  -  total flux cleaned = -0.000145286 Jy
! Component: 150  -  total flux cleaned = -0.00014513 Jy
! Component: 200  -  total flux cleaned = -0.000145024 Jy
! Total flux subtracted in 200 components = -0.000145024 Jy
! Clean residual min=-0.002847 max=0.002702 Jy/beam
! Clean residual mean=0.000003 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.158219 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 36 components and 0.158219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048865Jy  sigma=1.175711
! Fit after  self-cal, rms=0.048866Jy  sigma=1.175658
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048866Jy  sigma=1.175658
! Fit after  self-cal, rms=0.048784Jy  sigma=1.175599
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.619 mas, bmaj=5.365 mas, bpa=-31.1 degrees
! Estimated noise=0.547834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000328733 Jy
! Component: 100  -  total flux cleaned = -0.000328753 Jy
! Component: 150  -  total flux cleaned = -0.000303442 Jy
! Component: 200  -  total flux cleaned = -0.000314729 Jy
! Total flux subtracted in 200 components = -0.000314729 Jy
! Clean residual min=-0.002810 max=0.002653 Jy/beam
! Clean residual mean=0.000004 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.157904 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.157904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048772Jy  sigma=1.175413
! Fit after  self-cal, rms=0.048772Jy  sigma=1.175364
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.40655e-05 Jy
! Component: 100  -  total flux cleaned = -9.46917e-05 Jy
! Component: 150  -  total flux cleaned = -8.26098e-05 Jy
! Component: 200  -  total flux cleaned = -8.21005e-05 Jy
! Total flux subtracted in 200 components = -8.21005e-05 Jy
! Clean residual min=-0.002793 max=0.002614 Jy/beam
! Clean residual mean=0.000004 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.157822 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 40 components and 0.157822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048764Jy  sigma=1.175223
! Fit after  self-cal, rms=0.048765Jy  sigma=1.175187
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048765Jy  sigma=1.175187
! Fit after  self-cal, rms=0.048680Jy  sigma=1.175153
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.188 mas, bmaj=11.48 mas, bpa=-24.76 degrees
! Estimated noise=0.659185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247571 Jy
! Component: 100  -  total flux cleaned = 0.000251264 Jy
! Component: 150  -  total flux cleaned = 0.000239958 Jy
! Component: 200  -  total flux cleaned = 0.000220054 Jy
! Total flux subtracted in 200 components = 0.000220054 Jy
! Clean residual min=-0.002685 max=0.002447 Jy/beam
! Clean residual mean=0.000008 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.158042 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 43 components and 0.158042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048690Jy  sigma=1.175403
! Fit after  self-cal, rms=0.048677Jy  sigma=1.174995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.74654e-05 Jy
! Component: 100  -  total flux cleaned = -3.72705e-05 Jy
! Component: 150  -  total flux cleaned = -3.67503e-05 Jy
! Component: 200  -  total flux cleaned = -3.55824e-05 Jy
! Total flux subtracted in 200 components = -3.55824e-05 Jy
! Clean residual min=-0.002672 max=0.002354 Jy/beam
! Clean residual mean=0.000008 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.158007 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 44 components and 0.158007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048678Jy  sigma=1.175077
! Fit after  self-cal, rms=0.048672Jy  sigma=1.174811
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=5.358 mas, bpa=-31.08 degrees
! Estimated noise=0.547039 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.617 x 5.358 at -31.08 degrees (North through East)
! Clean map  min=-0.0025198  max=0.14002 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.864 mas, bmaj=4.74 mas, bpa=-34.24 degrees
! Estimated noise=0.860901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103129 Jy
! Component: 100  -  total flux cleaned = 0.128833 Jy
! Component: 150  -  total flux cleaned = 0.141361 Jy
! Component: 200  -  total flux cleaned = 0.148289 Jy
! Total flux subtracted in 200 components = 0.148289 Jy
! Clean residual min=-0.006007 max=0.004546 Jy/beam
! Clean residual mean=0.000002 rms=0.001290 Jy/beam
! Combined flux in latest and established models = 0.148289 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.148289 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=5.358 mas, bpa=-31.08 degrees
! Estimated noise=0.547039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00584564 Jy
! Component: 100  -  total flux cleaned = 0.0086919 Jy
! Component: 150  -  total flux cleaned = 0.00926784 Jy
! Component: 200  -  total flux cleaned = 0.00942582 Jy
! Total flux subtracted in 200 components = 0.00942582 Jy
! Clean residual min=-0.003218 max=0.002507 Jy/beam
! Clean residual mean=0.000004 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.157715 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.157715 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.188 mas, bmaj=11.48 mas, bpa=-24.76 degrees
! Estimated noise=0.659185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067686 Jy
! Component: 100  -  total flux cleaned = 0.000754711 Jy
! Component: 150  -  total flux cleaned = 0.00081043 Jy
! Component: 200  -  total flux cleaned = 0.000793651 Jy
! Total flux subtracted in 200 components = 0.000793651 Jy
! Clean residual min=-0.002816 max=0.002421 Jy/beam
! Clean residual mean=0.000008 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.158508 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.25842e-05 Jy
! Component: 100  -  total flux cleaned = -6.3051e-05 Jy
! Component: 150  -  total flux cleaned = -9.14074e-05 Jy
! Component: 200  -  total flux cleaned = -0.000118283 Jy
! Total flux subtracted in 200 components = -0.000118283 Jy
! Clean residual min=-0.002751 max=0.002399 Jy/beam
! Clean residual mean=0.000008 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.15839 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 39 components and 0.15839 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=5.358 mas, bpa=-31.08 degrees
! Estimated noise=0.547039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.45193e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106487 Jy
! Component: 150  -  total flux cleaned = -0.000151741 Jy
! Component: 200  -  total flux cleaned = -0.000209257 Jy
! Total flux subtracted in 200 components = -0.000209257 Jy
! Clean residual min=-0.002637 max=0.002534 Jy/beam
! Clean residual mean=0.000004 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.158181 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 45 components and 0.158181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048671Jy  sigma=1.175157
! Fit after  self-cal, rms=0.048670Jy  sigma=1.175139
wmodel /scr/pima/bg219a_uvs/J0140+4342_S_map.mod
! Writing 45 model components to file: /scr/pima/bg219a_uvs/J0140+4342_S_map.mod
wobs /scr/pima/bg219a_uvs/J0140+4342_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J0140+4342_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J0140+4342_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J0140+4342_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000488772 Jy
! Component: 100  -  total flux cleaned = -0.00091442 Jy
! Component: 150  -  total flux cleaned = -0.00133793 Jy
! Component: 200  -  total flux cleaned = -0.00151238 Jy
! Component: 250  -  total flux cleaned = -0.00170749 Jy
! Component: 300  -  total flux cleaned = -0.00188583 Jy
! Component: 350  -  total flux cleaned = -0.00199805 Jy
! Component: 400  -  total flux cleaned = -0.00215496 Jy
! Component: 450  -  total flux cleaned = -0.00227724 Jy
! Component: 500  -  total flux cleaned = -0.00239419 Jy
! Component: 550  -  total flux cleaned = -0.00248481 Jy
! Component: 600  -  total flux cleaned = -0.00261284 Jy
! Component: 650  -  total flux cleaned = -0.00267324 Jy
! Component: 700  -  total flux cleaned = -0.00269228 Jy
! Component: 750  -  total flux cleaned = -0.00274861 Jy
! Component: 800  -  total flux cleaned = -0.00278467 Jy
! Component: 850  -  total flux cleaned = -0.00276738 Jy
! Component: 900  -  total flux cleaned = -0.00276758 Jy
! Component: 950  -  total flux cleaned = -0.0027678 Jy
! Component: 1000  -  total flux cleaned = -0.00272057 Jy
! Component: 1050  -  total flux cleaned = -0.00265981 Jy
! Component: 1100  -  total flux cleaned = -0.00264504 Jy
! Component: 1150  -  total flux cleaned = -0.00257316 Jy
! Component: 1200  -  total flux cleaned = -0.00248913 Jy
! Component: 1250  -  total flux cleaned = -0.00242105 Jy
! Component: 1300  -  total flux cleaned = -0.0023811 Jy
! Component: 1350  -  total flux cleaned = -0.00238111 Jy
! Component: 1400  -  total flux cleaned = -0.00239358 Jy
! Component: 1450  -  total flux cleaned = -0.00235648 Jy
! Component: 1500  -  total flux cleaned = -0.00234465 Jy
! Component: 1550  -  total flux cleaned = -0.00234487 Jy
! Component: 1600  -  total flux cleaned = -0.00235651 Jy
! Component: 1650  -  total flux cleaned = -0.00229994 Jy
! Component: 1700  -  total flux cleaned = -0.00230003 Jy
! Component: 1750  -  total flux cleaned = -0.00224529 Jy
! Component: 1800  -  total flux cleaned = -0.00222374 Jy
! Component: 1850  -  total flux cleaned = -0.00219199 Jy
! Component: 1900  -  total flux cleaned = -0.00217116 Jy
! Component: 1950  -  total flux cleaned = -0.00220177 Jy
! Component: 2000  -  total flux cleaned = -0.00221173 Jy
! Component: 2050  -  total flux cleaned = -0.00217163 Jy
! Component: 2100  -  total flux cleaned = -0.0021815 Jy
! Component: 2150  -  total flux cleaned = -0.00214249 Jy
! Component: 2200  -  total flux cleaned = -0.00215223 Jy
! Component: 2250  -  total flux cleaned = -0.00213308 Jy
! Component: 2300  -  total flux cleaned = -0.00212369 Jy
! Component: 2350  -  total flux cleaned = -0.0020955 Jy
! Component: 2400  -  total flux cleaned = -0.00207687 Jy
! Component: 2450  -  total flux cleaned = -0.00206756 Jy
! Component: 2500  -  total flux cleaned = -0.00202157 Jy
! Component: 2550  -  total flux cleaned = -0.00201251 Jy
! Component: 2600  -  total flux cleaned = -0.00198539 Jy
! Component: 2650  -  total flux cleaned = -0.0019854 Jy
! Component: 2700  -  total flux cleaned = -0.0019496 Jy
! Component: 2750  -  total flux cleaned = -0.00193177 Jy
! Component: 2800  -  total flux cleaned = -0.00193177 Jy
! Component: 2850  -  total flux cleaned = -0.00195815 Jy
! Component: 2900  -  total flux cleaned = -0.00194064 Jy
! Component: 2950  -  total flux cleaned = -0.00194061 Jy
! Component: 3000  -  total flux cleaned = -0.00195802 Jy
! Component: 3050  -  total flux cleaned = -0.0019408 Jy
! Component: 3100  -  total flux cleaned = -0.0019581 Jy
! Component: 3150  -  total flux cleaned = -0.00198379 Jy
! Component: 3200  -  total flux cleaned = -0.00196676 Jy
! Component: 3250  -  total flux cleaned = -0.0019838 Jy
! Component: 3300  -  total flux cleaned = -0.00198376 Jy
! Component: 3350  -  total flux cleaned = -0.00199219 Jy
! Component: 3400  -  total flux cleaned = -0.00199213 Jy
! Component: 3450  -  total flux cleaned = -0.00199215 Jy
! Component: 3500  -  total flux cleaned = -0.00200051 Jy
! Component: 3550  -  total flux cleaned = -0.00200882 Jy
! Component: 3600  -  total flux cleaned = -0.00203373 Jy
! Component: 3650  -  total flux cleaned = -0.00203373 Jy
! Component: 3700  -  total flux cleaned = -0.00201716 Jy
! Component: 3750  -  total flux cleaned = -0.00201715 Jy
! Component: 3800  -  total flux cleaned = -0.00199241 Jy
! Component: 3850  -  total flux cleaned = -0.001976 Jy
! Component: 3900  -  total flux cleaned = -0.00194316 Jy
! Component: 3950  -  total flux cleaned = -0.00192682 Jy
! Component: 4000  -  total flux cleaned = -0.00188598 Jy
! Component: 4050  -  total flux cleaned = -0.001886 Jy
! Total flux subtracted in 4096 components = -0.00186966 Jy
! Clean residual min=-0.000429 max=0.000505 Jy/beam
! Clean residual mean=-0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.156311 Jy
keep
! Adding 228 model components to the UV plane model.
! The established model now contains 273 components and 0.156311 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J0140+4342_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.617 x 5.358 at -31.08 degrees (North through East)
! Clean map  min=-0.0013456  max=0.13898 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0140+4342_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.138984 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000125131 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.270099 0.270099 0.540197 1.08039 2.16079 4.32158 8.64315 17.2863 34.5726 69.1452
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.138 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1110.7 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0140+4342_S_uvs.log closed on Wed Apr  6 22:41:27 2016